当前位置： 阿仪网 > 光学仪器 > 配件耗材 > 粘接用品 > 深圳市蓝星宇电子科技有限公司 > 产品展示 > 半导体辅助工艺/光刻胶 > 光刻胶-导电胶 > 德国ALLRESIS导电胶AR-PC5090；AR-PC5091
德国ALLRESIS导电胶AR-PC5090；AR-PC5091
价格：￥电议
品牌名称：$brandModel.Title型号：AR-PC5090；AR-PC5091原产地：欧洲 更新时间：2026/10/19 9:27:06
产品摘要：德国ALLRESIST防护涂层PMMA Electra 92 (AR-PC 5090)
用于非氮基电子束电阻的导电保护涂层
用于在绝缘衬底上耗散电子束电荷的顶层
用于非氮基电子束电阻的导电保护涂层
用于在绝缘衬底上耗散电子束电荷的顶层
支付方式：
- 支付宝 微信 银行转账
产品完善度： 访问次数：1022
光刻机&3D打印机
- 德国Nnaoscrib
- 德国Heidelberg
- 德国Zeiss
- 德国Eulitha
- 瑞士Swisslitho AG
- 瑞典Mycronic
- 英国Durham
- 英国Nanobean
- NanoArch
- 德国ParcanNano 百及纳米针尖电子束光刻系统
- 德国SUSS
- 美国Sonoplot
- 美国Photonics
- 美国OAI
- China
- 俄罗斯Optosystem
- 美国Coherrent
- 中科院
- 纳米压印机
- Elinoix 电子束光刻机
- 尼康Nikon光刻机
- 奥地利EVG紫外纳米压印系统
- 激光微加工设备
- 瑞士 NnaoFrazor 光刻机
- 英国AML晶圆键合机
- 德国Raith 电子束光刻机
- 德 xiton 准分子激光器
镀膜沉积机
- 德国Iplas
- 德国Sentech
- 英国HHV
- 英国Oxford
- 英国Denton
- 芬兰Picosun
- 美国Nano-master
- 法国Iplas
- 美国TED Pella
- 荷兰 TSST
- 美国Denton Vacuum
- 美Arradiance
- 法国Plassys
- 英国Oxford Vacuum
- 日立Hitachi
- 美国Neocera
- 德国MBE-Komponenten 分子束外延系统
- 英国Quorum涡轮分子泵抽真空镀膜仪
- Syskey 镀膜系统
离子刻蚀与沉积
匀胶涂覆机
半导体辅助设备
半导体微纳检测仪器
- 德国Zeiss扫描电镜
- 德国KSI超声波扫描显微镜
- 德国Mecwins扫描式激光分析仪
- 美国Nanovea三维表面形貌仪
- 德国Sentech薄膜测量仪/光伏测量仪
- 德国Klocke Nanotech 3D纳米级三维测量仪
- 德国YXLON 高分辨率Ｘ射线检测设备
- 瑞士Nanosurf 原子力显微镜
- 日本Ribm原子力显微镜
- 日本AND粒子计数器
- 日本JEOL显微镜
- 德国Bruker光谱仪/显微镜/台阶仪
- 韩国Ecopia美国MMR霍尔效应测试仪
- 探针台
- 美国Sonix超声波扫描显微镜
- 美Royce拉力性能测试及芯片拾取放置
- 美国Filmetrics膜厚测量仪
- 美国RTI自动特性图示仪
- 美国TEX Keithley半导体参数分析仪
- 美国MMR霍尔效应测量仪
- 德国neaspec纳米级红外光谱仪
- 少子寿命测试仪
- 纳米压痕仪
- FEI扫描电镜Thermo光谱仪
- XRD X射线衍射仪
- X 射线多晶衍射仪
- 日本 IAS 化学检测分析系统
- 德国IPI 水汽分析系统
- 德国PVA TePla 超声波扫描显微镜
- 德国ThetaMetrisis膜厚测量仪
实验检测仪器
- PPMS 综合物性测量系统
- MPMS3最新一代磁学测量系统
- Anasazi 科研用小型无液氦核磁共振波谱仪
- DynaCool 全新一代完全无液氦综合物性测量系统
- Oxford pulsar 实验室智能核磁共振波谱仪
- 纽迈核磁共振分业析
- Neaspec 德国真空太赫兹近场光学显微镜
- OptoCool 超精准全开放强磁场低温光学研究平台
- 德Attocube低温强磁场原子力/磁力显微镜
- Super-ME-II多铁性磁电测量系统
- Bruker 手持拉曼光谱仪
- 德国耐驰Netzsch
- 德国Moeller 测角仪
- 美Associated 耐压测试仪
- 接触角测量仪
- 氟油检漏仪
- 光学式坐标测量仪
- 光功率计
- Thorlabs傅立叶红外光谱仪
- 纳米压痕仪
- 日本Tohuko 超高灵敏度材料氧化分析仪
- 超精细多功能无液氦低温光学恒温器
- 振动样品磁强计
- 法Alyxan 高分辨质子传递反应质谱
- nanosc 高精度铁磁共振仪
- 美Microsense 磁克尔效应测量系统
- 智能型氦液化器
- 美OAI 光功率计
- 英Glovebox 手套箱
- LakeShore 振动样品磁强计
- 德国Attocube 显微镜
- 粒子碰撞噪声检测仪
- Rion 液体光学颗粒度仪
- ADLEMA 检漏机
- 德YXLON CT检测
- 电子元器件水份分析仪
紫外清洗等离子清洗机
- 美Harrich 等离子清洗机
- 德Diener 等离子清洗机
- 德PVA Tepla 微波等离子清洗机
- 美Nano-master 晶圆清洗机
- 美国Jelight UV清洗机
- 日本SEN 紫外UV清洗机UV灯
- 蓝星宇UV清洗机
- SAMCO紫外臭氧清洗机
太阳能检测仪
UV灯
日立Hitachi
半导体辅助工艺/光刻胶
光刻胶/硅片
化学开封机 / 激光开封机
日本Elionix
德国Lecia 切片掩膜一体机
尼康Nikon光刻机
奥地利EVG光刻杨键合机压印机
日本理音Rion 微粒子计数器
德国Netzsch
德国YXLON 检测仪
企业档案
会员类型：标准版
已获得阿仪网信誉 等级评定
18成长值
(0 -40)基础信誉积累，可浏览访问
(41-90)良好信誉积累，可接洽商谈
(91+ )优质信誉积累，可持续信赖
阿仪网标准版会员：8年
工商认证 【已认证】
最后认证时间：
注册号： 【已认证】
法人代表： 【已认证】
参观次数：848592
手机网站：http://wap.app17.com/c143096/
公司网站：http://www.lxyee.net
详细内容
产品详情
Protective Coating PMMA Electra 92 (AR-PC 5090)
Conductive protective coating for non-novolak-based e-beam resists
Top layer for the dissipation of e-beam charges on insulating substrates
英国ALLRESIST防护涂层PMMA Electra 92 (AR-PC 5090)
用于非氮基电子束电阻的导电保护涂层
用于在绝缘衬底上耗散电子束电荷的顶层
Characterisation 描述
- as protective coating, this resist is not sensitive to light / radiation
- thin, conductive layers for the dissipation of charges during electron exposure
- coating of non-novolac PMMA, CSAR 62, HSQ et al.
- longterm-stable ａnd cost-efficient alternative to Espacer
- easy removal with water after exposure
- polyaniline-derivative dissolved in water ａnd IPA
Conductivity 导电率
Resistance measurements of AR-PC 5090.02 layers obtained after spin deposition. For thinner films, the resistance increases ａnd the conductivity decreases.
Process parameters 工艺参数
REM dissipation of charges
200 nm-squares written on quartz without distortion caused by charges with AR-P 662.04 ａnd AR-PC 5090.02
Protective Coating PMMA Electra 92 (AR-PC 5090)
Process conditions
This diagram shows exemplary process steps for resist Electra 92 - AR-PC 5090.02 ａnd PMMA-resist AR-P 664.04.
All specifications are guideline values which have to be adapted to own specific conditions.
Processing instructions
The conductivity may be varied by adjusting the thickness with different rotational speeds. Thicker layers of 90 nm thus have a 2.5 times higher conductivity as compared to 60 nm thick layers.
For the build-up of an even conductive layer, the substrate should be wetted with the resist solution before the spin process is started.
Protective Coating Novolac Electra 92 (AR-PC 5091)
Conductive protective coating for novolac-based e-beam resists
Top layer for the dissipation of e-beam charges on insulating substrates
Characterisation
- as protective coating, this resist is not sensitive to light / radiation
- thin, conductive layers for the dissipation of charges during electron exposure
- coating of novolac-based e-beam resist AR-N 7000
- longterm-stable ａnd cost-efficient alternative to Espacer
- easy removal with water after exposure
- polyaniline-derivative dissolved in water ａnd IPA
Conductivity
Resistance measurements of AR-PC 5091.02 layers obtained after spin deposition. For thinner films, the resistance increases ａnd the conductivity decreases.
Note: Novolac-based e-beam resists possess other surface properties than CSAR 62 or PMMA. AR-PC5091 was thus developed with a different solvent mixture. In all other respects however, the polymer composition of AR-PC 5090 ａnd AR-PC 5091 is identical so that both resists are referred to as “Electra 92“.
Process parameters
REM dissipation of charges
50 nm lines written on glass at a pitch of 150 nm with AR-N 7520.07 ａnd AR-PC 5091.02
Protective Coating Novolac Electra 92 (AR-PC 5091)
Process conditions
This diagram shows exemplary process steps for resist Electra 92 (AR-PC 5091.02) ａnd e-beam resist AR-N 7520.07neu. All specifications are guideline values which have to be adapted to own specific conditions.
Processing instructions
The conductivity may be varied by adjusting the thickness with different rotational speeds. Thicker layers of 90 nm thus have a 2.5 times higher conductivity as compared to 60 nm thick layers. In the case that crack formation is observed after tempering of the protective coating, the tempering step can be omitted.
For the build-up of an even conductive layer, the substrate should be wetted with the resist solution before the
spin process is started.
Protective Coating Electra 92
Application examples for PMMA-Electra 92
Shelf live of Electra 92
Conductivity properties of differently aged Electra 92 batches
The conductivity was determined as a function of the measured temperature. At temperatures < 100 °C, both resists show a virtually identical conductivity. Electra 92 is thus characterised by a very long shelf life. Conductivity measurements up to a temperature of 160°C which were performed directly on a hotplate showed a large increase of the conductivity by a factor of 10 (see diagram). This fact is due to the complete removal of water from the layer. After a few hours of air humidity absorption under room conditions, the conductivity decreases again to
the initial value. In the high vacuum of e-beam devices, the water is also completely removed ａnd the conductivity thus increases accordingly. This effect has been demonstrated in direct conductivity measurements under mediate vacuum conditions. Temperatures above 165 °C destroy the polyaniline irreversibly ａnd no conductivity is observed any more
CSAR 62 on glass with Electra 92 for deriving
30 – 150 nm squares of CSAR 62 on glass
The combination of CSAR 62 with Electra 92 - AR-PC5090.02 offers the best options to realise complex ebeam structuring processes on glass or semi-insulating substrates like e.g. gallium arsenide. The excellent sensitivity ａnd highest resolution of the CSAR are complemented harmoniously by the conductivity of Electra 92.
CSAR 62 ａnd Electra 92 on glass
At a CSAR 62 film thickness of 200 nm, squares with an edge length of 30 nm could reliably be resolved on glass.
PMMA Lift-off on glass with Electra 92
200 nm squares produced with 2-layer PMMA lift-off
Initially, the PMMA resist AR-P 669.04 (200 nm thickness) was coated on a quartz substrate ａnd tempered. The se cond PMMA resist AR-P 679.03 was then applied (150nm thickness) ａnd tempered, followed by coating with Electra 92. After exposure, Electra 92 was removed with
water, the PMMA structures were developed (AR 600-56) ａnd the substrate vaporised with titanium/gold. After a liftoff with acetone, the desired squares remained on the glass with high precision.
PMMA-Lift-off auf Glas mit Electra 92
Protective Coating Electra 92
Application examples for PMMA Electra 92
Electra 92 with HSQ on quartz
20 nm bars of HSQ, prepared on quartz AR-PC 5090.02
After a coating of Electra 92 on an HSQ resist, even this resist can be patterned on a quartz substrate with very high quality. The HSQ resist (20 nm thickness) was irradiated with the required area dose of 4300 µC/cm².
SX AR-PC 5000/90.2 was subsequently completely removed within 2 minutes with warm water ａnd no residues could be detected. After development of the HSQ resist, the structures with high-precision 20 nm bars remained.
Lift-off struktures on garnet
Lift-off structures on garnet (University of California, Riverside,Department of Physics ａnd Astronomy)
Plasmonic structures on quartz
Silver nanoparticles on quartz, generated with AR-P 672.11 ａnd ARPC 5090.02 (Aarhus University, Denmark)
Application examples for Novolac Electra 92
Electra 92 ａnd AR-N 7700 on glass
60 – 150 nm squares (100 nm height) on glass with AR-N 7700.08 ａnd AR-P 5091.02
Novolac-based e-beam resists possess other surface properties than CSAR 62 or PMMA. For this reason, AR-PC5091.02 was designed with a different solvent composition. E-beam resist AR-N 7700.08 was at first spincoated on glass, dried, coated with Electra 92 ａnd baked at 50 °C. After irradiation, the Electra layer was removed within 1 minute with water ａnd the e-beam resist then developed. The resulting resolution of 60 nm is very high for chemically amplified resists.
热门标签：德国ALLRESIS光刻胶-导电胶AR-PC5090；AR-PC5091,,导电胶AR-PC5090；AR-PC5091,,AR-PC5090；AR-PC5091
