RK 增压器通常用于在需要输入隔离或提高流量时，以 1:1 的比例再现气动信号。这款大容量增压器具有固定的最小死区，旨在显著提高大型执行器的行程速度。只要执行器的信号波动保持在通过调节增压器内部的均衡/旁通阀所确定的死区限值内，执行器就能保持其正常的缓慢而稳定的响应。

规格：

供气/输出接口：1/4″、1/2″ 或 3/4″ NPT (F)

信号接口：1/4″ NPT (F)

最大供气压力：10 kg/cm²

压力比：1 : 1

应用：缩短响应时间，尤其适用于大型执行器

特征：

• 快速响应，提高执行器行程速度

• 在高行程速度下保持执行器的正确位置

• 可调旁通阀提供良好的操作灵敏度

• 高稳定性，允许执行器对缓慢的信号变化做出正常的缓慢响应

• 可使用高压工厂气源

• 提供不同尺寸的增压器，以适应各种尺寸的执行器

• 主内部气源阀采用软密封件，实现严密关闭

• 具有极高的耐腐蚀性，采用外部不锈钢固定螺钉和内部耐磨部件

• 提供不锈钢和铝合金材质

RK Volume Booster is normally used to reproduce pneumatic signals in 1:1 ratio whenever input isolation or increased flow capacity is required. This high capacity Volume Booster, with a fixed minimum deadband, is designed to substantially improve the stroking speed of large actuators. Actuators retain their normal slow and stable responses as long as their signal fluctuations remain within the deadband limits that are determined by adjustment of the equalizing/ bypass valve within the Booster.

Specifications:

Supply / Output connection : 1/4″, 1/2″ or 3/4″ NPT (F)

Signal Connection : 1/4″ NPT (F)

Maximum Supply Pressure : 10 Kg/cm2

Pressure Ratio : 1 : 1

Application : To reduce the response time, particularly of large actuators

Features:

• Quick response with increased actuator stroking speed

• Maintains correct actuator positioning at high stroking speed

• Adjustable bypass valve provides good operational sensitivity

• High stability which allows normal slow actuator response to slow signal changes

• Capable of using high pressure plant air supply

• Different booster sizes available to suit a wide range of actuator sizes

• Main internal air supply valve with soft seat insert for tight shut off

• Highly corrosion resistant with external stainless steel retaining screws and internal wear parts

• Stainless Steel and Aluminium construction available

R.K CONTROL VB1000AL1

R.K CONTROL VB1000SS1

R.K CONTROL VB3000AL2

R.K CONTROL VB3000AL3

R.K CONTROL VB3000SS2

R.K CONTROL VB3000SS3

R.K CONTROL 3000

R.K CONTROL 1000

R.K CONTROL DCV01