JT6410A Programmable Electronic Load

JT641x/JT641xA系列电子负载，在JT63xxA系列高性能电子负载的基础上，增加了多种快充协议的支持，方便了用户对快充产品的测试。同时，借助500KHz高速同步采样及DSP技术，全面加强瞬态测试以及多方位的智能分析，并全面整合到自动测试功能，特别适用于电源及相关行业的量产与来料检测；而可编程电流上升率、高速动态带载及可编程序列功能，亦可以满足大部分的研发需要。

Features：

★ Support USB PD2.0 / PD3.0 / QC 2.0 / QC 3.0 / QC4.0+ / PE+ / PE+ 2.0 / FCP / SCP /

AFC / VOOC protocol。( JT641x no support FCP / SCP / AFC / VOOC)

★ 500KHz synchronous sampling with 10Hz，10uA，0.1mV stable resolution.

★ Support the measurement of ripple voltage/current ripple (Vpp/Ipp), peak

voltage/current (Vp+/Ip+) and valley voltage/current (Vp-/Ip-)

★ Support CC, CV, CP & CR mode

★ Support accurately simulating LED electronic load loading.（JT6410 / JT6410Awithout

this function）。

★ Support CP & CR mode when in CV/CC source and support CV/CC source detecting

and matching when in CR mode.

★ Support up to 50KHz dynamic loading mode and peak voltage (Vp+) and valley voltage

(Vp-) measurement。

★ Support over current protection test (OCP) and maximum power point capture (Pmax)

★ Support load effect measurement.

★ Support high-speed dynamic frequency sweep function.。

★ Support timing measurement。

★ Support over voltage protection test

★ Built-in waveform generator. In list mode, different waveforms can be simulated.

★ Support short-circuit analog function.

★ Support automatic test (A-test) alone.

★ Support battery resistance and battery capacity test.

★ Support remote sensing.

★ Support Von and Voff function.

★ Shortcut supports 20 groups of data storage and read.

★ High-luminance & full view graphic dot matrix screen.

★ Over current, over voltage, over power, over temperature, polarity reversed protection

★ Intelligent fan system. Fan will be automatically initiated according to the temperature.

★ Support external trigger input and output.

★ Standard RS232 interface.

★ Support current waveform output monitoring.

★ Standard SCPI protocol.