如下为我司爱泽工业IZE_Industries本月到货RESIDEO相关产品，欢迎致电索取样本资料和产品信息。

依据 EN 806-2 标准，此类减压阀可保护家用供水系统免受过高供水压力的影响；在规格允许范围内，也可用于工业或商业领域。安装减压阀可避免因压力过高造成的损坏，并降低用水量。即使入口压力大幅波动，设定压力仍能保持恒定。降低并稳定运行压力，可最大限度地减少管路系统中的水流噪音。

• 入口压力平衡——出口压力不受入口压力波动影响

• 规格在 1 1/4" 及以下的产品已获 LGA 认证，Group 1（低噪音）标准，无使用限制

• 阀芯采用优质合成材料制成，可完全更换

• 通过旋转调节旋钮设定出口压力

• 设定压力值直接显示在刻度盘上

• 调节弹簧不与饮用水接触

• 内置精细过滤器

• 易于加装改造，可转换为带反冲洗功能的过滤组合阀

• 可加装入口止回阀

• 亦提供不带连接接头的版本

• 所有材料均符合UBA要求

• 所有材料均获ACS认证

According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.

• Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure

• Up to size 1 1/4" approved by LGA for low noise, Group 1 without limitations

• The valve insert is of high quality synthetic material and can be fully exchanged

• The outlet pressure is set by turning the adjustment knob

• The set pressure is directly indicated on the set point scale

• The adjustment spring is not in contact with the drinking water

• Integral fine filter

• Easily retrofittable to convert valve to a reverse-rinsing filter combination

• Can be retrofitted with an inlet check valve

• Also available without fittings

• All materials are UBA conform

• All materials are ACS approved

此类减压阀可保护系统免受供水侧过高压力的影响。在规格允许的范围内，它们适用于工业或商业应用。若减压阀进水侧出现过高压力且下游系统需要保护，则应加装安全阀。

• 进口压力平衡——出口压力不受进口压力波动影响

• 安装长度短

• 配备带旋钮的压力调节螺杆

• 调节弹簧不与介质接触

• 内螺纹连接

• 结构紧凑

• 重量轻

Pressure reducing valves of this type protect installations against excessive pressure from the supply. They can be used for industrial or commercial applications within the range of their specification. Should excessive pressure occur on the outside of the pressure reducing valve and the downstream system needs to be protected, a safety valve should be installed.

• Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure

• Short installed length

• Screw with knob for setting pressure

• The adjustment spring is not in contact with the medium

• Internal threaded connection

• Compact construction

• Light weight

依据 EN 806-2 标准，此类减压阀可保护家用供水系统免受过高供水压力的影响；在规格允许范围内，也可用于工业或商业领域。安装减压阀可避免因压力过高造成的损坏，并降低用水量。即使在入口压力大幅波动的情况下，设定压力仍能保持恒定。降低并稳定运行压力，可最大限度地减少管路系统中的水流噪音。

• 无铅：所有材料的铅（Pb）含量均低于0.1%

• 入口压力平衡设计——出口压力不受入口压力波动影响

• 采用专利阀芯设计，便于安装与维护

• 仅需三种规格的阀芯即可覆盖所有公称通径，有效优化库存管理

• 不锈钢阀芯与 PA 涂层确保了卓越的耐腐蚀性能

• 调节弹簧不与饮用水接触

• 配备入口及出口压力表

• 功能与性能已通过加速寿命测试验证（测试循环次数超过400,000次；EN 1567标准要求为200,000次）

• 符合BSEN 1567标准

• 所有材料均符合UBA要求

• 获ACS认证

According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.

• LEAD FREE: Pb content of all materials less than 0.1 %

• Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure

• Patented cartridge solution for easy assembly and maintenance

• Three cartridge inserts for all nominal widths make warehousing efficient

• High corrosion resistance due to stainless steel cartridge and PA coating

• The adjustment spring is not in contact with the drinking water

• With inlet and outlet pressure gauge

• Functionality and performance have been confirmed by an accelerated life test with over 400,000 cycles (requirement acc. to EN 1567: 200,000 cycles)

• Conforms to BSEN 1567

• All materials are UBA conform

• ACS certified

如果您需要完整的RESIDEO的相关技术咨询，请随时致电爱泽工业（021-3100 6702），或者访问网站www.ize-industries.com,我们将尽全力解决您的问题。

If you have any question for RESIDEO, please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.

IZE-industries

Contact Information：

Tel：0086-21-31006702 or 0086-21-35350722

Fax：0086-21-35350711

Mobile：0086-189 1750 1433

E-mail：sales@ize-industries.com

Website：www.ize-industries.com

爱泽工业专注对全球高端工业产品的研究及市场应用

为中国制造提供更多权威有效的工业产品及行业讯息