厂商禾烽输血输液加温仪HF-110B,HF-120B
价格：￥ 电议
品牌名称：$brandModel.Title型号： 原产地：中国大陆 医疗器械注册号(批文)：粤械注准20222140747更新时间：2026/10/16 11:11:09
支付方式：
- 支付宝 微信 银行转账
产品完善度： 访问次数：84
企业档案
会员类型：旗舰版
已获得阿仪网信誉 等级评定
(0 -40)基础信誉积累，可浏览访问
(41-90)良好信誉积累，可接洽商谈
(91+ )优质信誉积累，可持续信赖
阿仪网旗舰版会员：1年
工商认证 【已认证】
最后认证时间：
注册号： 【已认证】
法人代表： 【已认证】
参观次数：137197
手机网站：http://wap.app17.com/c174616/
旗舰版网址：http://ksdy.app17.com
详细内容
厂商禾烽输血输液加温仪HF-110B,HF-120B
桂经理19117326863微xin同号
桂经理19117326863微xin同号
产品名称 输血输液加温仪
管理类别 第二类
型号规格 HF-110B；HF-120B
结构及组成/主要组成成分 输血输液加温仪主机、硅胶加热管、背夹和电源线组成。
适用范围/预期用途 供医疗机构用于患者输血输液过程中对液体进行加温和保温，产品不与液体接触。不用于镇痛药、化疗药物、胰岛素等药物的加温。
备注：HF‑110B 为单通道；HF‑120B 为双通道，可同时两路液体加温，其余原理、特点、报警、存储、禁忌症基本一致。
1、工作原理 Working Principle
中文：采用干式硅胶包裹式加温技术，主机双 CPU 控制系统采集加热管温度信号，闭环控温；输液管路嵌入医用硅胶加热槽内，通过热传导对流经管路的血液、药液进行非接触式加温，不直接接触液体；软硬件多重过热保护，超温自动切断加热输出，实现安全可控的液体加温输出。 English：Adopts dry silicone‑encapsulated heating technology. Dual‑CPU control system collects temperature signals from heating profiles to realize closed‑loop precise temperature control. The infusion tube is ｅmbedded in medical‑grade silicone heating groove. Blood and infusate flowing through tubing are warmed by heat conduction without direct liquid contact. Multiple hardware‑software over‑temperature protections cut off heating output automatically to achieve safe and controllable fluid warminghephomed.c...。
2、产品功能 Functions
中文
对输注血液、药液进行加温，降低低温输注带来的低体温风险；
HF‑110B 单通道加温；HF‑120B 双通道独立加温，两路可分别设置温度；
温度实时显示、加温计时；
高温、低温、系统故障、超时声光报警；
温度单位摄氏度 / 华氏度切换；
超温强制断电保护功能。 English
Warm transfused blood and infusion fluid to reduce hypothermia risk caused by cold fluid transfusion.
HF‑110B: single‑channel warming; HF‑120B: dual‑channel independent warming with separate temperature setting for each channel.
Real‑time temperature display and heating timing function.
Audible‑visual alarm for high temperature, low temperature, system error and overtime.
Temperature unit switch between ℃ and ℉.
Forced power‑off protection against over‑temperature.
3、产品特点 Product Features
中文
双 CPU 架构，软硬件三重安全保护，高温强制切断加热；
干式硅胶加温，液体不接触加热元件，适配标准 PVC 输血输液管路；
温度可调范围 32.0℃‑42.0℃，0.1℃步进调节；
快速预热：23℃升温至 42℃≤2 分钟；
黑底白字大屏显示，远距离可读；实体按键，防误触；
多种规格硅胶加热管可选，即插即用；
可夹持固定于输液架，便携，占用空间小；
HF‑120B 双通道可同时加温两路输注液体hephomed.c...。 English
Dual‑CPU architecture, triple hardware‑software safety protection with forced heating cut‑off under over‑temperature.
Dry silicone heating, liquid does not contact heating element, compatible with standard PVC blood/infusion tubing.
Adjustable temperature range:32.0℃‑42.0℃, adjustable in 0.1℃ step.
Fast preheating: from 23℃ to 42℃ within ≤2 minutes.
Large black‑background‑white‑character display for long‑distance reading; physical keys to avoid mis‑operation.
Multiple optional silicone heating profiles, plug‑and‑play.
Can be clamped on IV stand, compact and portable.
HF‑120B dual‑channel design for warming two infusion lines simultaneouslyhephomed.c...。
4、技术参数 Technical Parameters
表格
| 中文 | English |
|---|---|
| 型号：HF‑110B（单通道）、HF‑120B（双通道） | Model: HF‑110B(Single‑channel), HF‑120B(Dual‑channel) |
| 加温方式：干式硅胶外包裹热传导加温 | Heating method: Dry silicone external contact heat conduction warming |
| 温度设置范围：32.0℃～42.0℃ | Temperature setting range:32.0℃‑42.0℃ |
| 控温精度：≤±1.0℃ | Temperature control accuracy: ≤±1.0℃ |
| 调节步长：0.1℃ | Adjustment step:0.1℃ |
| 预热时间：23℃升至 42℃≤2min | Preheat time:23℃ to 42℃ ≤2min |
| 适配管路外径：3.5mm‑7.0mm | Applicable tubing outer diameter:3.5mm‑7.0mm |
| 报警：高温、低温、系统故障、超时声光报警 | Alarm: Audible‑visual alarm for high temp, low temp, system fault, overtime |
| 供电：AC100‑240V，50/60Hz | Power supply:AC100‑240V,50/60Hz |
| HF‑110B 外形尺寸：140×115×175mm；重量 0.86kg | HF‑110B Dimension:140×115×175mm; Weight:0.86kg |
| HF‑120B 外形尺寸：155×115×175mm；重量 1.2kg | HF‑120B Dimension:155×115×175mm; Weight:1.2kg |
| 防护等级：I 类设备，BF 型应用部分 | Protection class: Class I device, BF applied part |
| 工作环境温度：10℃‑30℃ | Operating ambient temperature:10℃‑30℃ |
5、使用方法 Operation Method
中文
将主机夹持锁紧固定在输液架上；接通电源，设备自检；
连接硅胶加热管，HF‑120B 双通道分别接两根加热管；
将输血 / 输液管路平整嵌入硅胶加热管槽内，管路不得扭曲、弯折受压；
开机，按 “+/-” 设置目标加温温度；
按下启动键，设备开始加温，待温度达到设定值后开启输注；
HF‑120B 双通道可独立设置温度、独立启停；
输注完毕，先停止加温，再取出管路，关机断开电源；
使用后用 75% 医用酒精擦拭设备外壳及加热管外表面，禁止液体渗入设备内部。 English
Clamp and fasten main unit onto IV stand, connect power supply, device perｆorms self‑test.
Connect silicone heating profiles; HF‑120B connects two heating profiles for dual‑channel.
Embed blood/infusion tubing flatly into silicone heating groove; avoid tubing twisting, bending and compression.
Power‑on, set target temperature via “+/-” keys.
Press start key to begin heating; start transfusion after temperature reaches set value.
HF‑120B dual‑channel supports independent temperature setting, start‑stop for each channel.
After transfusion, stop heating firstly, take out tubing, power‑off and disconnect mains supply.
Wipe housing and outer surface of heating profiles with 75% medical alcohol after use; prevent liquid permeating into device interior.
6、适应症 Indications
中文：临床输血、输液时，对血液、输注药液进行加温，预防大量冷液体输入导致患者低体温，适用于手术室、ICU、急诊、病房、急救转运等场景。 English：Warm blood and infusion fluid during clinical blood transfusion and intravenous infusion, prevent patient hypothermia caused by massive cold fluid input. Suitable for operating room, ICU, emergency department, ward and emergency transport.
7、禁忌症 Contraindications
中文
禁止加温对热敏感、遇热会变性失效的药物；
禁止用于加温不能加热的特殊制剂；
不可直接加热人体组织；
设备故障报警未排除故障时禁止继续使用。 English
Do not use for heat‑sensitive drugs which may denature or lose efficacy under heating.
Do not warm special preparations forbidden to be heated.
Shall not heat human tissue directly.
Forbid continuous operation when device alarm occurs without troubleshooting.
8、注意事项 Precautions
中文
本设备仅用于管路外部干式加温，液体不进入设备内部；不得将液体注入设备；
严格使用适配外径的标准输血输液管路；管路不得挤压、打折；
输血建议加温温度不超过 39℃，避免血液成分破坏；
设备工作期间，医护人员应定时监测患者及设备温度显示；
出现声光报警，应立即停止输注，排查故障；高温报警优先切断加温输出；
禁止对设备内部冲洗消毒，仅可擦拭外壳；
加热管为耗材配件，出现老化、破损立即更换；
不可在高湿、水汽喷淋环境使用；避免跌落撞击；
仅由经过培训的医护人员操作使用。 English
This device only provides external dry‑type tubing warming; no liquid shall flow into device interior. Never pour liquid into unit.
Use only compatible standard blood/infusion tubing of proper outer diameter; avoid tubing squeezing or kinking.
Recommended warming temperature for blood transfusion shall not exceed 39℃ to prevent blood component damage.
Medical staff shall regularly monitor patient condition and device temperature display during operation.
Once audible‑visual alarm triggers, stop transfusion immediately and troubleshoot; high‑temperature alarm will cut heating output preferentially.
Forbid internal flushing disinfection; only wipe outer housing.
Replace heating profiles once aging or damage occurs.
Do not operate under high‑humidity or water‑splashing environment; avoid dropping and impact.
Operated only by trained medical personnel.
9、存储条件 Storage Condition
中文：环境温度‑20℃～+55℃；相对湿度 10%‑93% 无冷凝；无腐蚀性气体，通风干燥避光存放，避免重压、摔落。 English：Ambient temperature‑20℃～+55℃; relative humidity 10%‑93% non‑condensing; store in ventilated, dry and dark environment without corrosive gas; avoid heavy compression and dropping.
10、说明书核心摘要 Core Summary of Instruction Manual
中文：HF‑110B 单通道、HF‑120B 双通道干式输血输液加温仪，依靠硅胶热传导实现管路内血液药液加温；双 CPU 多重过热保护，具备完整声光报警；HF‑120B 两路通道独立控制；使用时管路平整嵌入加热槽，严禁管路弯折挤压；热敏感药物禁止加温；输血温度不宜超过 39℃；设备仅外壳擦拭消毒，不可冲洗内部；出现报警立即停机排查；储存于干燥通风环境，配件老化及时更换。 English：HF‑110B single‑channel & HF‑120B dual‑channel dry‑type blood & infusion warmer warms blood and infusate inside tubing via silicone heat conduction. Dual‑CPU multi‑over‑temperature protection and complete audible‑visual alarm system. HF‑120B supports independent control for two channels. Tubing shall be flatly ｅmbedded into heating groove without kinking or squeezing. Do not warm heat‑sensitive medicines. Blood warming temperature shall not exceed 39℃. Only wipe outer housing for disinfection; internal flushing is prohibited. Stop operation immediately for alarm troubleshooting. Store in dry‑ventilated place; replace aged accessories timely.
免责声明：以上产品详情仅供参考，临床操作请以原厂纸质说明书为准。上海康世达医疗器械有限公司不生产医疗产品，所有产品均来自产品的生产厂家，代理商，经销商，如有侵权请联系我们，会尽快处理！The above product details are for reference only. All clinical operations shall be carried out in strict accordance with the original paper instructions for use issued by the manufacturer.
Shanghai Kangshida Medical Devices Co., Ltd. does not manufacture medical devices. All products are sourced from respective manufacturers, authorized agents and distributors.
Please contact us promptly in case of any infringement, and we will resolve the matter as soon as possible.
热门标签：厂商禾烽输血输液加温仪HF-110BHF-120B,禾烽输血输液加温仪,输血输液加温仪HF-110B
