厂家直供欧科路眼前节测量评估系统Pentacam70700
价格：￥ 电议
品牌名称：$brandModel.Title型号： 原产地：中国大陆 医疗器械注册号(批文)：国械注进20172166746更新时间：2026/10/16 11:11:02
支付方式：
- 支付宝 微信 银行转账
产品完善度： 访问次数：281
企业档案
会员类型：旗舰版
已获得阿仪网信誉 等级评定
(0 -40)基础信誉积累，可浏览访问
(41-90)良好信誉积累，可接洽商谈
(91+ )优质信誉积累，可持续信赖
阿仪网旗舰版会员：1年
工商认证 【已认证】
最后认证时间：
注册号： 【已认证】
法人代表： 【已认证】
参观次数：138516
手机网站：http://wap.app17.com/c174616/
旗舰版网址：http://ksdy.app17.com
详细内容
厂家直供欧科路眼前节测量评估系统Pentacam70700
桂经理19117326863微xin同号
管理类别
第二类
型号规格
Pentacam 70700
结构及组成/主要组成成分
该产品由主机、头部托架、电源适配器、连接线组成。
适用范围/预期用途
该产品临床用于眼科，帮助医生对患者眼前节分析、白内障分析、角膜厚度测量和角膜曲率半径测量及角膜容积参考性数据获得。
、工作原理 / Working Principle
中文基于 旋转式 Scheimpflug 断层扫描成像 技术：
设备内置裂隙照明与 Scheimpflug 相机，360° 旋转 扫描眼前节。
利用 Scheimpflug 原理，使倾斜的成像平面与物体平面共轭，从角膜前表面到晶状体后表面全程清晰聚焦。
2 秒内 拍摄 50 张 断层图像，采集 25,000 个 三维高度数据点（HR 版达 138,000 点）。
实时追踪眼球微运动并自动校正，通过 光线追踪算法 精确计算组织边界，构建眼前节（角膜、前房、虹膜、晶状体）三维立体模型。
EnglishBased on Rotating Scheimpflug Tomography:
A slit illumination system and Scheimpflug camera rotate 360° around the eye.
Uses the Scheimpflug principle to achieve full-depth sharp focus from the anterior cornea to the posterior lens.
Captures 50 tomograms in <2 seconds, measuring 25,000 3D elevation points (138,000 for HR).
Real-time eye-tracking & auto-correction; ray-tracing precisely defines tissue boundaries to build a 3D model of the cornea, anterior chamber, iris, and lens.
二、产品功能 / Functions
中文
角膜测量：前后表面地形图、高度图、曲率、全角膜厚度图（定位最薄点）、角膜容积。
前房分析：前房深度（ACD）、前房容积、房角开放度（ACA）、瞳孔直径。
晶状体评估：晶状体密度、厚度、位置，白内障分级。
疾病筛查：早期 / 亚临床圆锥角膜 检测与分级、角膜扩张、屈光手术后评估。
像差分析：角膜高阶像差（Zernike）、EKR 分布图。
手术规划：ICL/TICL 尺寸计算、白内障 IOL 公式（Holladay 等）。
数据报告：3D 可视化、双眼对比、随访趋势分析、DICOM/PDF 导出。
English
Cornea: Anterior/posterior topography, elevation, curvature, pachymetry (thinnest point), corneal volume.
Anterior Chamber: Depth (ACD), volume, angle (ACA), pupil diameter.
Lens: Density, thickness, position, cataract grading.
Disease Screening: Early/subclinical keratoconus detection & grading, ectasia, post-refractive surgery assessment.
Aberrometry: Corneal higher-order aberrations (Zernike), EKR map.
Surgical Planning: ICL/TICL sizing, cataract IOL calculations (Holladay).
Reporting: 3D visualization, binocular comparison, progression analysis, DICOM/PDF export.
三、产品特点 / Product Features
中文
旋转扫描，无阴影：360° 旋转，消除鼻侧阴影，数据更完整。
真正三维测量：同时获取角膜前后表面数据，优于传统仅测前表面设备。
极速：2 秒完成扫描，非接触、无损伤。
超高精度：厚度精度达 ±1µm，符合 ISO 10940 标准。
智能眼追踪：实时补偿眼球运动，确保测量。
临床准：圆锥角膜筛查灵敏度 92.3%，屈光手术必备。
多模态融合：集成 Scheimpflug 与 Placido 技术，数据可靠。
全流程质控：自动质量评分（QS），确保结果可信度。
English
Rotation, No Shadow: 360° scan eliminates nasal shadowing for complete data.
True 3D: Measures both anterior & posterior corneal surfaces, unlike traditional devices.
Fast & Non-Contact: <2 sec scan, no touch, no harm.
Ultra-Precision: ±1µm thickness accuracy, ISO 10940 compliant.
Smart Eye-Tracking: Real-time motion compensation for unmatched accuracy.
Gold Standard: 92.3% sensitivity for keratoconus, essential for refractive surgery.
Multi-Modal: Combines Scheimpflug & Placido for comprehensive data.
Full QC: Auto Quality Score (QS) ensures reliable results.
四、技术参数 / Technical Parameters
表格
项目 Item 中文 Chinese 英文 English
型号 Pentacam 70700 Pentacam 70700
扫描技术 旋转式 Scheimpflug 断层扫描 Rotating Scheimpflug Tomography
扫描时间 < 2 秒 < 2 seconds
图像采集 50 张断层图 / 138,000 个数据点 50 Slits / 138,000 Data Points
测量范围 角膜全表面、前房、晶状体、房角 Cornea, AC, Lens, Angle
角膜厚度精度 ±1µm ±1µm
前房深度范围 0 – 15mm 0 – 15mm
曲率测量范围 30 – 60D 30 – 60D
固视监测 实时红外眼动追踪 Real-time IR Eye Tracking
数据接口 USB, LAN, DICOM 3.0 USB, LAN, DICOM 3.0
电源 AC 100~240V, 50/60Hz AC 100~240V, 50/60Hz
安全标准 IEC 60601, ISO 10940, YY 0787 IEC 60601, ISO 10940, YY 0787
五、使用方法 / Usage
中文
准备：开机自检预热 → 清洁颌托 / 额托 → 录入患者信息。
患者就位：调整座椅，下颌放托、额头贴紧，双眼自然睁开，注视固视灯。
对焦：操作操纵杆，将十字光标对准瞳孔中心，设备自动对焦。
测量：按下启动键，保持眼球静止，等待 2 秒完成扫描。
审核：检查质量评分（QS），确认图像清晰、数据完整后保存。
报告：选择临床模板（如圆锥角膜筛查、ICL 规划），生成并打印报告。
结束：消毒设备部件，关闭系统。
English
Preparation: Power-on self-test → clean rests → enter patient data.
Positioning: Adjust chair; chin on rest, forehead against bar, eyes open, fixate target.
Focus: Use joystick to align crosshairs with pupil; auto-focus engages.
Measurement: Press start; hold eye steady, scan completes in 2 seconds.
Review: Check Quality Score (QS); save if clear & complete.
Report: Select template (Keratoconus, ICL), generate & print.
Completion: Disinfect & power down.
六、适应症 / Indications
中文
屈光手术：术前筛查（排除圆锥角膜）、术后评估、角膜扩张监测。
ICL/TICL 植入：前房深度、容积、房角、白到白（WTW）测量。
白内障：晶状体密度分级、IOL 度数计算、前房深度评估。
青光眼：窄房角筛查、前房容积测量、角膜厚度校正眼压。
角膜疾病：圆锥角膜（早期 / 亚临床）、角膜变性、瘢痕、水肿评估。
角膜接触镜：RGP/OK 镜验配前的角膜形态分析。
English
Refractive Surgery: Pre-op screening (rule out keratoconus), post-op follow-up, ectasia monitoring.
ICL/TICL: ACD, volume, angle, WTW measurement.
Cataract: Lens grading, IOL power calculation, ACD assessment.
Glaucoma: Narrow angle screening, AC volume, CCT for IOP correction.
Cornea: Keratoconus (early/subclinical), dystrophies, scars, edema.
Contact Lenses: Corneal shape analysis for RGP/Ortho-K fitting.
七、禁忌症 / Contraindications
中文
绝对禁忌：无绝对禁忌症（非接触、、低能量）。
相对慎用：
严重眼球震颤、无法固视（数据不可靠）。
急性结膜炎、角膜炎（大量分泌物干扰成像）。
角膜大面积溃疡、穿孔（避免刺激）。
精神障碍、无法配合检查者。
English
Absolute: None (Non-contact, non-invasive, low energy).
Relative Caution:
Severe nystagmus, inability to fixate (unreliable data).
Acute conjunctivitis/keratitis (discharge obscures image).
Large corneal ulcers/perforations (avoid irritation).
Psychiatric conditions, uncooperative patients.
八、注意事项 / Cautions
中文
环境：室温 18–26℃、湿度 40–60%、无尘、防震、避光。
患者：检查前 24 小时 摘软镜，1 周 摘 RGP；不化眼妆。
操作：专业人员；禁止触摸 光学镜头；每月校准。
测量：确保瞳孔中心对焦；患者避免眨眼、转动眼球。
质控：严格审核质量评分（QS），低分需重测。
安全：设备可靠接地；光线对眼安全，勿直视光源。
English
Environment: 18–26°C, 40–60%RH, dust/shock/dark-free.
Patient: Remove soft lenses 24hrs, RGP 1wk prior; no eye makeup.
Operation: Trained staff only; no lens touch; monthly calibration.
Measurement: Align on pupil center; patient avoid blinking/moving.
QC: Check QS score; retest if low.
Safety: Proper grounding; eye-safe light; avoid direct viewing.
九、存储条件 / Storage
中文
温度：5–40℃。
湿度：30–75%RH，无冷凝。
环境：通风干燥、防尘、防震、远离腐蚀性气体。
运输：防潮、防震、防倒置，使用原包装。
长期存储：每月通电 30 分钟；盖好镜头盖；放置干燥剂。
English
Temperature: 5–40°C.
Humidity: 30–75%RH, non-condensing.
Environment: Dry, ventilated, dust/shock/corrosion-free.
Transport: Moisture/shock-proof, upright, original packaging.
Long-term: Power on 30min/month; use lens cap; desiccant included.
十、说明书核心信息 / Manual Highlights
中文
全称：OCULUS Pentacam 70700 眼前节测量评估系统。
核心技术：旋转 Scheimpflug 断层扫描、3D 眼追踪、光线追踪算法。
临床地位：全球准眼前节分析仪，圆锥角膜筛查。
精度标准：角膜厚度 ±1µm，符合 ISO 10940 国际标准。
维护周期：每日清洁、每周消毒、每月校准、年度维护。
认证：国械注进、CE、IEC 60601、ISO 10940。
质保：整机 2 年，光学系统 5 年。
English
Full Name: OCULUS Pentacam 70700 Anterior Segment Analyzer.
Core Tech: Rotating Scheimpflug, 3D Eye-Tracking, Ray-Tracing Calculation.
Clinical Status: Global Gold Standard, primary choice for keratoconus screening.
Precision: ±1µm pachymetry, ISO 10940 certified.
Maintenance: Daily clean, weekly disinfect, monthly calibrate, annual service.
Certifications: CFDA, CE, IEC 60601, ISO 10940.
Warranty: 2 years whole unit, 5 years optics.
Shanghai Kangshida Medical Devices Co., Ltd. is a professional company engaged in the sales of medical devices, focusing on the agency and distribution of renowned medical equipment brands from both domestic and international markets. Its core product range covers full-scenario medical devices for physical examination, diagnosis, emergency treatment, laboratory testing, ultrasound, medical analysis, life sciences, disinfection and sterilization, rehabilitation therapy, operating rooms, emergency rooms, consulting rooms and other fields. Relying on its strong product sales capacity, excellent commercial reputation and integrity-based operation philosophy, the company has won unanimous recognition and trust from medical institutions and partners.
The steady and rapid development of the company is attributed to its carefully selected high-quality product portfolio. It always takes customer needs as the core orientation and is committed to creating long-term value and practical benefits for customers. As an authorized and exclusive agent for many well-known domestic and international manufacturers, the company has established a complete supply system of medical devices with reliable quality, fully meeting the needs of clinical diagnosis and treatment.
The company always takes improving customer satisfaction as its core goal. To strictly adhere to product standards and exceed the expectations of customers and manufacturers, it regularly provides training on professional ethics and professional business skills, forging a highly competent, efficient and executive team covering business, technology and management. The team implements a 7×24-hour all-weather response mechanism to provide professional and high-quality after-sales service and technical support, efficiently solving various equipment operation and maintenance problems. At the same time, the company offers exclusive services including same-day delivery and free distribution, ｆorming a closed loop covering supply, distribution and after-sales service to fully ensure the stable supply and worry-free use of medical equipment for medical institutions.
Upholding integrity as the foundation of its business, the company selects high-quality medical devices and provides professional services for customers, helping to upgrade the quality of medical services and contributing to the high-quality development of China's medical industry.
Intellectual Property Infringement Complaint: Kangshida Medical does not manufacture medical products; all products are sourced from original manufacturers. We will promptly address any intellectual property infringement issues.The content published herein is for reference only.
热门标签：厂家直供欧科路眼前节测量评估系统Pentacam70700,欧科路眼前节测量评估系统,欧科路眼前节测量评估系统70700
