当前位置: 阿仪网 > 医疗器械 > 电子仪器 > 其他 > 上海康世达医疗器械有限公司 > 产品展示 > 心脏设备 > 心肺复苏机 > 厂家威尔心肺复苏机MCC-E21,MCC-E22,MCC-E23,MCC-E24,MCC-E25
厂家威尔心肺复苏机MCC-E21,MCC-E22,MCC-E23,MCC-E24,MCC-E25
企业档案
会员类型:旗舰版
已获得阿仪网信誉 等级评定
(0 -40)基础信誉积累,可浏览访问
(41-90)良好信誉积累,可接洽商谈
(91+ )优质信誉积累,可持续信赖
阿仪网旗舰版会员:1年
最后认证时间:
注册号: 【已认证】
法人代表: 【已认证】
参观次数:137213
手机网站:http://wap.app17.com/c174616/
旗舰版网址:http://ksdy.app17.com
详细内容
厂家威尔心肺复苏机MCC-E21,MCC-E22,MCC-E23,MCC-E24,MCC-E25
桂经理19117326863微xin同号
管理类别
第二类
型号规格
MCC-E21
MCC-E22
MCC-E23
MCC-E24
MCC-E25
结构及组成/主要组成成分
MCC-E21、MCC-E24:主机、可充电电池、医疗适配器(含电源线)、胸腔按压设备固定带、按压头护套、数据线;
MCC-E22、MCC-E23、MCC-E25:主机、可充电电池、医疗适配器(含电源线)、胸腔按压设备固定带、按压头护套、数据线、按压显示终端。
适用范围/预期用途
一、工作原理 Working Principle
中文MCC‑E 系列采用电动机械驱动 + 3D 按压技术(Weil 专利),融合心泵与胸泵双重机制,通过电机驱动按压头对胸骨中下 1/3 处实施垂直、稳定、连续的胸外按压。内置传感器实时监测按压深度、频率、释放比与胸廓回弹,自动维持指南标准参数。设备支持连续按压与30:2 通气同步双模式,缓启动设计降低骨折风险,按压与操作分离,可无线调控,实现、高效、安全的自动化 CPR。
EnglishMCC‑E series useselectric mechanical drive + 3D Compression Technology(Weil patent), integrating cardiac pump and thoracic pump mechanisms. A motor drives the compression head to deliver vertical, stable, continuous chest compressions on the lower‑middle sternum. Built‑in sensors monitor compression depth, rate, duty cycle, and chest recoil in real time, automatically maintaining guideline‑compliant parameters. The device supportscontinuous compressionand30:2 ventilation‑synchronizedmodes; soft‑start design reduces fracture risk; compression and operation are separated for wireless control, enabling precise, efficient, safe automated CPR.
二、产品特点 Product Features
中文
3D 专利按压:融合心泵 / 胸泵优势,血流动力学更优,复苏效率更高
电机倒置设计:重心<15cm,抗倾倒,转运 / 颠簸环境稳定
双模式操作:连续按压、30:2 通气同步,适配不同场景
参数可调:深度 / 频率 3 档可调,终端可连续微调
按压操作分离:无线终端控制,减少线缆束缚
多维数据监测:OLED 屏实时显示深度 / 频率 / 模式 / CCF / 电量
长续航:电池≥60 分钟,边充边用,按压不中断
轻巧便携:主机(含电池)仅 2.3kg,快速部署
安全防护:II 类 CF 型防除颤,缓启动,过载 / 低电量报警
环境适应:IP33,-10℃~+45℃,倾斜 60° 稳定工作
数据传输:蓝牙 / Wi‑Fi/USB,180 小时存储,支持复盘
English
Patented 3D Compression: Combines cardiac/thoracic pump advantages for superior hemodynamics and higher resuscitation efficiency
Inverted Motor Design: Center of gravity <15cm, anti‑toppling, stable during transport/bumpy conditions
Dual Modes: Continuous compression, 30:2 ventilation‑synchronized for different scenarios
Adjustable Parameters: 3 levels for depth/rate; terminal supports fine‑tuning
Separate Compression & Operation: Wireless terminal control, no cable constraints
Multi‑dimensional Data Monitoring: OLED screen displays depth/rate/mode/CCF/battery in real time
Long Battery Life: ≥60 minutes; works while charging for uninterrupted compressions
Lightweight & Portable: Main unit (with battery) only 2.3kg, fast deployment
Safety Protection: Class II CF defibrillation‑proof, soft start, overload/low‑battery alarms
Environmental Adaptability: IP33, -10℃~+45℃, stable at 60° tilt
Data Transfer: Bluetooth/Wi‑Fi/USB, 180‑hour storage, supports debriefing

三、技术参数 Technical Specifications
| 项目 Item | 中文 Chinese | English |
|---|---|---|
| 型号 Model | MCC‑E21/E22/E23/E24/E25 | MCC‑E21/E22/E23/E24/E25 |
| 品牌 Manufacturer | SunLife(尚领医疗,苏州) | SunLife (Suzhou) |
| 驱动方式 Drive | 电动机械(直流无刷电机) | Electric mechanical (brushless DC motor) |
| 按压技术 Compression Tech | 3D 按压(Weil 专利) | 3D Compression (Weil patent) |
| 适用人群 Patient | 成人(18 岁 +,胸围 77‑137cm,体重 40‑130kg) | Adults (18+, chest 77‑137cm, weight 40‑130kg) |
| 按压频率 Rate | 116‑120 次 / 分(3 档可调) | 116‑120 bpm (3 levels adjustable) |
| 按压深度 Depth | 40‑55mm(3 档可调) | 40‑55mm (3 levels adjustable) |
| 释放比 Duty Cycle | 57±5% | 57±5% |
| 工作模式 Modes | 连续按压、30:2 通气同步 | Continuous, 30:2 ventilation‑sync |
| 显示终端 Display | E21/E24:无;E22/E23/E25:2.8 英寸 OLED | E21/E24: None; E22/E23/E25: 2.8” OLED |
| 重量 Weight | 主机(含电池):2.3kg | Main unit (with battery): 2.3kg |
| 电池 Battery | 可充电锂电池,≥60 分钟 | Rechargeable Li‑ion, ≥60 min |
| 防护等级 Protection | IP33 | IP33 |
| 操作温度 Operating Temp | -10℃~+45℃ | -10℃~+45℃ |
| 存储温度 Storage Temp | -20℃~+70℃ | -20℃~+70℃ |
| 数据存储 Data Storage | 180 小时 | 180 hours |
| 数据传输 Data Transfer | 蓝牙 / Wi‑Fi/USB | Bluetooth/Wi‑Fi/USB |
| 安全等级 Safety | II 类,CF 型防除颤 | Class II, CF defibrillation‑proof |
| 注册证号 Reg. No. | 苏械注准 20182081121 | Suzhou Med. Device Reg. 20182081121 |
四、使用方法 Operating Instructions
中文
准备:确认患者成年、无意识无呼吸无脉搏,启动急救,裸露胸部
固定:将设备置于患者胸骨中下 1/3 处,用固定带绑紧,确保稳固
开机:长按电源键,自检完成进入待机
模式选择:按模式键选连续按压或 30:2 通气同步
参数调节:通过主机或无线终端设置深度 / 频率
启动:按启动键,设备开始自动按压(缓启动)
通气配合:30:2 模式下,暂停时进行 2 次人工通气
除颤:无需移除设备,除颤时自动暂停,电击后立即恢复
转运:保持固定,倾斜≤60°,持续按压
停止:按停止键,关机,取下设备,清洁消毒
English
Preparation: Confirm adult patient, unresponsive, apneic, pulseless; activate emergency response, expose chest
Secure: Place device on lower‑middle sternum; fasten with strap for stability
Power On: Long‑press power; standby after self‑test
Mode Selection: Press mode key for continuous or 30:2 ventilation‑sync
Parameter Adjustment: Set depth/rate via main unit or wireless terminal
Start: Press start; device begins automatic compression (soft start)
Ventilation Coordination: In 30:2 mode, deliver 2 manual ventilations during pauses
Defibrillation: No removal needed; auto‑pauses for shock, resumes immediately
Transport: Keep secured, tilt ≤60°, continue compressions
Stop: Press stop, power off, remove device, clean/disinfect

五、适应症 Indications
中文适用于18 岁以上成年患者(胸围 77‑137cm,体重 40‑130kg),在急性循环骤停(无意识、无自主呼吸、无脉搏)时,作为人工 CPR 的辅助工具,用于院前急救、院内急诊、转运途中及 ECPR/PCI 支持期间的持续胸外按压。
EnglishForadult patients ≥18 years(chest 77‑137cm, weight 40‑130kg) inacute circulatory arrest(unresponsive, apneic, pulseless), as an adjunct to manual CPR for continuous chest compression in pre‑hospital care, ED, transport, and ECPR/PCI support.
六、禁忌症 Contraindications
中文
患者有自主呼吸、脉搏或意识
年龄<18 岁、婴幼儿、孕妇
胸围<77cm 或>137cm、体重<40kg 或>130kg
胸部严重创伤、开放性伤口、胸骨 / 肋骨骨折、胸廓畸形
活动性大出血、血胸、气胸、心包填塞
胸部皮肤严重感染、烧伤、皮疹
无法安全固定设备(如脊柱损伤无法翻身)
患者已明确死亡(尸僵、尸斑)
English
Patient with spontaneous breathing, pulse, or consciousness
<18 years, infants, pregnant women
Chest <77cm or >137cm, weight <40kg or >130kg
Severe chest trauma, open wounds, sternal/rib fractures, chest deformity
Active massive bleeding, hemothorax, pneumothorax, cardiac tamponade
Severe chest skin infection, burns, rashes
Inability to secure device safely (e.g., spinal injury, cannot roll)
Patient clearly deceased (rigor mortis, livor mortis)
七、注意事项 Cautions
中文
仅由接受过 MCC‑E 专业培训人员操作
必须确认循环骤停后方可使用,严禁对有生命体征者按压
固定必须牢固,避免移位导致按压失效
缓启动,禁止突然启动 / 停止,降低骨折风险
除颤时无需移除,CF 级防除颤设计安全
转运中倾斜≤60°,防止倾倒
定期检查电池电量,低电量及时充电 / 更换
避免液体进入主机,IP33 仅防溅水,不可浸泡
设备异常(报警、按压失效、异响)立即停止,排查故障
仅作 CPR 辅助,不可替代人工通气、除颤及生命支持
使用后清洁消毒主机 / 固定带,按压头护套一次性使用
定期维护校准,确保功能正常
English
Operate only by personnel trained in MCC‑E
Confirm circulatory arrest before use; never compress on patients with vital signs
Ensure secure fixation to prevent shifting and compression failure
Soft start; avoid sudden start/stop to reduce fracture risk
No removal during defibrillation; CF‑rated design is safe
Tilt ≤60° during transport to prevent tipping
Check battery level regularly; charge/replace promptly when low
Avoid liquid ingress; IP33 is splash‑proof only, do not immerse
Stop use immediately for abnormalities (alarms, failure, noise) and troubleshoot
Use only as CPR adjunct; do not replace manual ventilation, defibrillation, or advanced life support
Clean/disinfect unit/strap after use; compression head cover is single‑use
Perform regular maintenance/calibration to ensure proper function
中文
温度:-20℃~+70℃
湿度:5%~95%(非冷凝)
避免阳光直射、高温、潮湿、腐蚀气体、强电磁干扰
存放于干燥、通风、清洁环境,水平放置
电池长期存储:电量保持 50%,每 3 个月充电一次
一次性耗材密封存放于阴凉干燥处,有效期内使用
定期自检(每月 1 次),确保设备功能正常
English
Temperature: -20℃ to +70℃
Humidity: 5%–95% (non‑condensing)
Avoid direct sunlight, high temperature, moisture, corrosive gases, strong electromagnetic interference
Store in dry, ventilated, clean environment; place horizontally
Long‑term battery storage: maintain 50% charge, recharge every 3 months
Store disposable consumables sealed in cool, dry place; use before expiration
Perform monthly self‑tests to ensure proper function
九、说明书核心信息 Manual Key Information
中文
产品名称:电动心肺复苏机(胸腔按压机)
型号:MCC‑E21/E22/E23/E24/E25
品牌:SunLife(苏州尚领医疗科技)
注册证号:苏械注准 20182081121
组成:
E21/E24:主机、电池、适配器、固定带、按压头护套、数据线
E22/E23/E25:+ 按压显示终端(2.8 英寸 OLED)
适用人群:18 岁以上成年循环骤停患者
核心功能:3D 按压、双模式、参数可调、无线控制、数据监测 / 传输、长续航
操作:一键启动,缓启动,模式 / 参数可调,除颤兼容
安全:II 类 CF 防除颤、IP33、过载 / 低电量报警、抗倾倒
维护:定期自检、电池维护、清洁消毒、耗材更换
质保:主机 1 年,电池 6 个月,耗材按有效期
English
Product Name: Electric Cardiopulmonary Resuscitation System (Chest Compression Machine)
Model: MCC‑E21/E22/E23/E24/E25
Manufacturer: SunLife (Suzhou SunLife Medical Technology)
Registration No.: Suzhou Med. Device Reg. 20182081121
Components:
E21/E24: Main unit, battery, adapter, strap, compression head cover, data cable
E22/E23/E25: + Compression display terminal (2.8” OLED)
Intended Use: For adult patients ≥18 years in circulatory arrest
Core Functions: 3D compression, dual modes, adjustable parameters, wireless control, data monitoring/transfer, long battery life
Operation: One‑touch start, soft start, mode/parameter adjustment, defibrillation‑compatible
Safety: Class II CF defibrillation‑proof, IP33, overload/low‑battery alarms, anti‑toppling
Maintenance: Regular self‑tests, battery care, cleaning/disinfection, consumable replacement
Warranty: 1‑year unit, 6‑month battery, consumables per expiration date
Shanghai Kangshida Medical Devices Co., Ltd. is a professional company engaged in the sales of medical devices, focusing on the agency and distribution of renowned medical equipment brands from both domestic and international markets. Its core product range covers full-scenario medical devices for physical examination, diagnosis, emergency treatment, laboratory testing, ultrasound, medical analysis, life sciences, disinfection and sterilization, rehabilitation therapy, operating rooms, emergency rooms, consulting rooms and other fields. Relying on its strong product sales capacity, excellent commercial reputation and integrity-based operation philosophy, the company has won unanimous recognition and trust from medical institutions and partners.
The steady and rapid development of the company is attributed to its carefully selected high-quality product portfolio. It always takes customer needs as the core orientation and is committed to creating long-term value and practical benefits for customers. As an authorized and exclusive agent for many well-known domestic and international manufacturers, the company has established a complete supply system of medical devices with reliable quality, fully meeting the needs of clinical diagnosis and treatment.
The company always takes improving customer satisfaction as its core goal. To strictly adhere to product standards and exceed the expectations of customers and manufacturers, it regularly provides training on professional ethics and professional business skills, forging a highly competent, efficient and executive team covering business, technology and management. The team implements a 7×24-hour all-weather response mechanism to provide professional and high-quality after-sales service and technical support, efficiently solving various equipment operation and maintenance problems. At the same time, the company offers exclusive services including same-day delivery and free distribution, forming a closed loop covering supply, distribution and after-sales service to fully ensure the stable supply and worry-free use of medical equipment for medical institutions.
Upholding integrity as the foundation of its business, the company selects high-quality medical devices and provides professional services for customers, helping to upgrade the quality of medical services and contributing to the high-quality development of China's medical industry.
Intellectual Property Infringement Complaint: Kangshida Medical does not manufacture medical products; all products are sourced from original manufacturers. We will promptly address any intellectual property infringement issues.The content published herein is for reference only.
热门标签:厂家威尔心肺复苏机MCC-E21MCC-E22MCC-E23MCC-E24MCC-E25,威尔心肺复苏机,威尔心肺复苏机MCC-E












