当前位置：阿仪网 > 行业仪器 > 建筑工程 > 其他 > 上海畅风实验仪器有限公司 > 产品展示 > 砌墙砖试验仪器 > 高精度自控砖瓦泛霜箱源头厂家ZFX-10A

高精度自控砖瓦泛霜箱源头厂家ZFX-10A

价格：￥电议

品牌名称：畅风型号：ZFX-10A 原产地：中国大陆更新时间：2026/10/12 12:31:17

产品摘要：高精度自控砖瓦泛霜箱源头厂家本产品是按照GB5101—2003关于砖瓦泛霜试验要求而设计制造的新一代砖瓦试验仪器，能自动控制箱体内的温度，是砖瓦生产、施工、试验单位检测产品质量的专用设备之

支付方式：

支付宝微信银行转账

产品完善度：访问次数：557

企业档案

会员类型：旗舰版

已获得阿仪网信誉等级评定

56成长值

(0 -40)基础信誉积累，可浏览访问

(41-90)良好信誉积累，可接洽商谈

(91+ )优质信誉积累，可持续信赖

阿仪网旗舰版会员：3年

工商认证【已认证】

最后认证时间：

注册号：【已认证】

法人代表：【已认证】

参观次数：313456

手机网站：http://wap.app17.com/c139681/

旗舰版网址：http://www.cfyiqi.cn

详细内容

高精度自控砖瓦泛霜箱源头厂家

ZFX-10A自控砖瓦泛霜箱
一、产品简介：本产品是按照GB5101—2003关于砖瓦泛霜试验要求而设计制造的新一代砖瓦试验仪器，能自动控制箱体内的温度，是砖瓦生产、施工、试验单位检测产品质量的专用设备之一。砖瓦泛霜箱 (1)(1).jpg
适用范围：烧结普通砖、烧结多孔砖、空心砖和空心砌块砖、烧结粘土砖、免烧砖、粉煤灰砖、炉渣砖和碳化砖等的泛霜试验。
二、主要技术参数：
(1) 控制温度：室温—32℃
(2) 箱体容积：100L
(3) 加热功率：0.6KW
(4) 试件数量：5块（10块）
(5) 电源电压：220V±10％
三、试验规程：
1、实验设备：砖瓦泛霜试验箱一台
a. 不漏水耐腐蚀的浅盘5个，容水深度为25~35mm。
b. 能盖住浅盘的有机玻璃板5块或塑料薄膜5张，在其中间部位留有60mm×120mm的长方形孔。
c. 烘箱一台
d. 干湿球温度计一只。
e. 蒸馏水适量
2、自控砖瓦泛霜箱砖样准备
将未浸过水的10块砖样分成五对，每对砖的敲击声音相近，颜色相近，外观基本一致。再从每对砖样中取出一块，共五块，按顺序编号作为实验组。另外五块作为对照组，也按同样顺序编号。
用毛刷把粘附在砖样上的粉尘刷掉，然后把这十块砖样放在110~115℃的烘箱内烘干到恒重，将砖样取出盛放在泛霜试验箱内冷却到常温即可开始试验。砖瓦泛霜箱 (2)(1).jpg

高精度自控砖瓦泛霜箱源头厂家

ZFX-10A Automatic Control Brick and Tile Efflorescence Test Box

I. Product Introduction

This product is a new-generation brick and tile testing instrument designed and manufactured in accordance with the efflorescence test requirements specified in GB 5101-2003 (Common Burned Clay Bricks). It features automatic temperature control within the chamber and serves as a specialized device for testing product quality in brick and tile production, construction, and testing institutions.

Scope of Application: Efflorescence tests for fired common bricks, fired perforated bricks, hollow bricks, hollow concrete blocks, fired clay bricks, unburned bricks, fly ash bricks, slag bricks, carbonated bricks, and other similar products.

II. Main Technical Parameters

(1) Controlled Temperature Range: Room temperature to 32°C.
(2) Chamber Capacity: 100 L.
(3) Heating Power: 0.6 kW.
(4) Sample Quantity: 5 samples (or 10 samples).
(5) Power Supply: 220 V ± 10%.

III. Test Procedures

1. Experimental Equipment

One ZFX-10A Automatic Control Brick and Tile Efflorescence Test Box.
a. Five water-leakage-proof and corrosion-resistant shallow trays with a water depth of 25–35 mm.
b. Five acrylic plates or plastic films (each large enough to cover a shallow tray) with a 60 mm × 120 mm rectangular hole in the center.
c. One drying oven.
d. One wet-and-dry bulb thermometer.
e. Sufficient distilled water.

2. Sample Preparation for ZFX-10A Efflorescence Test Box

Select 10 unsoaked brick samples and divide them into five pairs. Each pair should be similar in knocking sound, color, and overall appearance. From each pair, select one brick (total of five) and number them sequentially as the experimental group. The remaining five bricks (from each pair) are numbered sequentially as the control group.
Use a brush to remove adhering dust from all 10 brick samples. Dry the samples in a drying oven at 110–115°C until they reach constant weight. Remove the samples and place them in the efflorescence test box to cool to room temperature before starting the test.

返回顶部

点击询价

联系方式

热门标签：高精度自控砖瓦泛霜箱源头厂家,自控砖瓦泛霜箱,砖瓦泛霜箱厂家