德国耶拿进样针402-889.180
多功能燃烧管402-889.510

德国耶拿 Analytik Jena燃烧管 402-889.510

德国耶拿 Analytik Jena燃烧管 402-885.010

德国耶拿 Analytik Jena燃烧管 402-890.134

多功能燃烧管402-889.510

德国耶拿 Analytik Jena燃烧管 402-889.510

德国耶拿 Analytik Jena燃烧管 402-885.010

德国耶拿 Analytik Jena燃烧管 402-890.134

德国耶拿Analytik Jena

nalytikjena

德国耶拿进样隔垫 402-889.557 Sealing disk, 17 mm, for plastic cap GL 18 resp. for waste vessel of sampler, set of 5 pieces

德国耶拿 402-886.305 500µl SYR H ø8Vent 1/4"-28 RN 1,0x0,7c51

德国耶拿 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

德国耶拿 402-886.306 Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces

德国耶拿402-889.186 Removable special needles, set of 3 pieces

Consumables multi EA 5000

402-889.527 Auto-Protection valve assembly, complete

no picture available

B 402-889.091 Lids for sample vials, 2 ml, set of 500 pieces

402-889.652 Flow test kit

no picture available

A 402-889.182 Wires for cleaning syringe needles, set of 10 pieces

402-007.513 FAST connector, 1 piece

(adaptor angeled for gas tubings, black)

402-801.317 Fuse for furnace unitT 10 A H, 20 mm

402-820.044 Air filter for membrane dryer pump (at rear side of multi EA 5000), 1 piece

402-889.510 Multi purpose combustion tube

B 402-825.045 Tweezers, straight, ｔruncated

B 402-889.092 Sample vials, 2 ml, set of 100 pieces

(for sample rack with 112 positions)

402-889.558 PTFE filter plate, d = 25 mm (Auto protection replacement filter) Set of 5 pieces

402-820.129 Oxygen and argon gas supply tubing

FEP, OD 6 mm (sold by meter), 1 m

A 402-889.306 Screw cap with hole, GL 18

402-889.557 Sealing disk, 17 mm, for plastic cap GL 18, Set of 5 pieces

402-889.583 Special sealing 12 mm

(FAST connector at outlet of multi purpose combustion tube)

402-822.118 Heat resistent gloves, 1 pair

Sampling modules

MMS 5000

402-812.374 Replacement screw

(mounting of autosampler on the basic unit/ ABD)

A 402-823.079 Removable needles for 50 ａnd 100 μl syringes, set of 3 pieces

402-886.248 Waste hose

A 402-889.206 Septum for rinsing vessel

402-889.533 Syringe 50 μl, with removable needle, without markings

402-889.534 Syringe 100 μl, with removable needle, without markings 402-889.547 Gripper for sample boats

Autoinjector

402-889.589 Syringe 10 μl, for Autoinjector, with removable needle

recommended for higher element concentrations ａnd systems with carbon module

402-889.592 Syringe 100 μl, for Autoinjector, with removable needle

402-889.590 Syringe 20 μl, for Autoinjector, with removable needle

recommeded for higher element concentrations, for systems with carbon module ａnd for systems with only one detector module (N or S)

402-889.591 Syringe 40 μl, for Autoinjector, with removable needle

recommended as standard syringe for N/S systems

A 402-889.186 Removable special needles, set of 3 pieces

402-815.839 Sealing for sample port MBD

402-889.671 Feed tube for MBD

402-889.672 Hook for MBD

402-889.670 MBD coupling tube, glass

402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces

402-889.560 Set of sealing elements horizontal 402-889.673 Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

Automatic boat drive - ABD

402-889.551 ABD coupling tube, glass

402-886.236 Sealing for sample port ABD

A 402-881.028 Finger-Tight-Set, 1/8" for tubing, 5 ferrules ａnd 5 screwing

A 402-889.073 Feed tube, for MVS shunt/ABD

A 402-889.066 Hook, for MVS shunt/ABD

suitable from MVS serial number 509 046 ａnd higher

402-815.838 O-ring 14 mm x 4 mm for ABD

402-889.674 Quartz boat, 40 mm x 9 mm, set of 10 pieces

402-889.560 Set of sealing elements horizontal

A 402-889.050 Septum; 12.5 mm; set of 5 pieces

402-889.673 Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

A 402-889.039 Adsorption material, set of 3 pieces

Gas Sampling System - GSS

B 402-889.148 Replacement septum for gas sampling bag 10 l, 1 piece

402-820.057 Ferrule 1/16", 1 piece

multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece

402-820.123 Ferrule for injection needle, vertical operation, 1 piece

B 402-889.147 Gas sampling bag 10 l for GSS ａnd GSS type C, 1 piece

A 402-889.180 Injection head for GSS, LPG ａnd GSS/LPG, vertical operation, complete

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation

402-889.423 Septum perforated for special needle PEEK in horizontal operation mode

A 402-890.018 Special needle for GSS,LPG ａnd GSS/LPG, horizontal operation mode, PEEK

LPG Module ａnd GSS/LPG combi module

402-889.439 Bubble vessel

402-820.057 Ferrule 1/16", 1 piece

multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece

402-820.123 Ferrule for injection needle, vertical operation, 1 piece

A 402-889.180 Injection head for GSS, LPG ａnd GSS/LPG, vertical operation, complete

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation mode

A 402-815.058 Lab-type screw joint D 3.2 - GL 14, complete (red)

multi EA 5000: for bubble vessel

A 402-881.116 O-ring, i.d. = 6 mm x 3 mm

multi EA 5000: for screw cap GL 14 bubble vessel

402-889.423 Septum perforated for special needle PEEK in horizontal operation mode

A 402-890.018 Special needle for GSS,LPG ａnd GSS/LPG, horizontal operation mode, PEEK

402-889.061 Extended Sulfur Calibration Kit; 0,05 - 10 mg/l

402-889.060 Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l B 402-889.070 Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank

B 402-889.167 Sulfur Calibration Kit (10 - 100 mg/l) incl. blank

B 402-889.164 Sulfur Calibration Kit (100 - 500 mg/l)

B 402-889.069 Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank

B 402-889.165 Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank

B 402-889.162 Nitrogen Calibration Kit (100 - 500 mg/l)

A 402-823.048 Membrane dryer

B 402-815.030 O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces

multi EA 5000: sealing for inner part of membrane dryer

Sulfur Coulometer

A 402-889.313 Absorber tube for Sulfur coulometer, glass

402-820.110 Connecting hose 1/8", (sold by meter), 1m

A 402-889.302 Diaphragma for titration cell of Sulfur coulometer

A 402-889.308 Sealing for screw cap with hole, GL 32, Sulfur coulometer

A 402-889.309 Sealing for screw cap with hole, GL 14, Sulfur coulometer

402-889.307 Sealing for screw cap with hole, GL 18, Sulfur coulometer

A 402-889.311 Gas introduction tube for titration cell of Sulfur coulometer, glass

A 402-520.137 Glass screw joint (gray)

multi EA 5000: (Screw joint for tube 8 mm)

A 402-889.301 Indicator electrode for titration cell of Sulfur coulometer

A 402-889.303 Cathode for titration cell of Sulfur coulometer

A 402-889.310 Stirrer bar, titration cell, Sulfur coulometer

402-884.015 Packet with one charge of silver wool

A 402-889.305 Screw cap with hole, GL 14 for gas introduction tube ａnd electrodes, Sulfur coulometer

A 402-889.306 Screw cap with hole, GL 18

A 402-889.304 Screw cap with hole, GL 32 Diaphragma, Sulfur coulometer

A 402-889.314 Septa for titration cell for Sulfur Coulometer, set a 50 pieces

402-889.300 Titration cell for Sulfur coulometer, glass

A 402-889.312 Fitting GL zz, for absorber tube, sulfur coulometer

TC/TOC-Module

B 402-886.311 Syringe graduated 500 μl with removable needle for manual injection

B 402-885.019 Halogen absorber, complete with U-tube

402-810.050 Halogen absorber filling (copper- ａnd brass wool)

A 402-885.017 High-temperature mat, set of 3 pieces

A 402-823.056 Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operation mode

402-889.657 Condensation coil

no picture available

B 402-810.059 Special catalyst platinum, sufficient for 5 refills

A 402-810.048 Special catalyst platinum, one refill

B 402-886.318 Sample vials, 8 ml

50 mm x 18 mm, 125 pieces

A 402-884.005 Pump hose for peristaltic pump, waste

A 402-881.006 Quartz glass cullet, coarse grains, packet of 80 g

A 402-825.044 Quartz wool, 1 packet

402-889.659 Septum TIC vessel

402-889.658 Septum combustion tube

no picture available

402-881.245 Set of TC prefilter ａnd water trap

402-889.594 Syringe 250 μl with vent ａnd removable needle

(for autosampler)

402-889.593 Syringe 500 μl with vent ａnd removable needle

(for autosampler)

402-889.656 TIC vessel

A 402-825.150 U-tube, o.d. = 11 mm, without filling for halogenabsorber

(without connections)

no picture

available

402-889.655 Combustion tube

Chlorine Detection

402-815.831 Hose to connect suction extractor at workplace or vent

lengh 70 cm

402-889.549 Connecting part (metal) for gas transfer line

with outside thread

402-825.123 Beaker for sulfuric acid vessel

402-889.561 Replacement hose for heated gas transfer line

402-820.053 Ferrule for connecting part (metal)

for gas transfer line with outside thread

402-820.055 Ferrule for screw joint

gas transfer line with inside thread

402-889.559 Gas transfer hose

B 402-889.071 Chlorine Calibration Kit ( 0.1 - 10 mg/l) incl. blank B 402-889.166 Chlorine Calibration Kit (10 - 100 mg/l) incl. blank

B 402-889.163 Chlorine Calibration Kit (100 - 500 mg/l)

A 402-520.177 ferrule set, 1/4" TFE

402-30003 Ferrule set, 1/8" PTFE

402-825.124 Petri dish for sulfuric acid vessel

402-889.569 Tubing inside sulfuric acid vessel with ferrule

402-889.508 sulfuric acid vessel with outlet

402-889.507 Safety cowl for the sulfuric acid tank

402-825.108 Funnel for sulfuric acid vessel

402-889.573 Connector sulfuric acid vessel

A 402-30031 Swagelok screw fitting, 1/4" onto 1/8", PTFE

Chlorine detection with chlorine module high sensitive

B 402-890.007 Storage vessel for sensor electrode

A 402-889.085 Mounting to connect suction extractor at workplace, NS

14.5 brown glass

402-99998 preamplifier for sensor electrode

A 402-889.123 Gas introduction tube

A 402-889.124 Set of rubber plugs; 1 x NS14, 1 x NS7

A 402-889.112 Internal electrolyte sensor electrode, 50 ml

A 402-815.023 Magnetic stirring bar, PTFE, 30 mm x 6 mm, 1 piece

A 402-889.006 Platinum electrode

A 402-889.184 Electrolyte bridge

B 402-889.110 Salt solution to make up 100 ml electrolyte

A 402-889.002 Sensor electrode 402-889.536 Silver electrode

Chlorine detection with titration cells sensitive ａnd high concentration

402-889.538 Storage vessel for combination electrode

B 402-880.605 Disposable tube 18 mm x 6 mm, filled

packet of 10 pieces, for AOX determination (column method)

402-890.610 Disposable quartz tubes 18 x 6, filled; set á 100 pieces for AOX determination (column method)

A 402-880.211 Combination electrode (ceramic)

A 402-815.022 Magnetic stirring bar, PTFE, 15 mm x 6 mm, 1 piece

402-889.673 Sample boat, special, with downholder for special applications

402-889.510 Multi purposecombustion tube

402-825.045 Tweezers, straight,ｔruncated

402-889.092

Sample vials, 2 ml, setof 100 pieces

402-889.558

PTFE filter plate, d =25 mm (Aurotection replacementfilter)

402-820.129

Oxygen ａnd argon gassupply tubing

402-889.306

Screw cap with hole,GL 18

402-889.557

Sealing disk, 17 mm,for plastic cap GL 18,set of 5 pieces

402-889.583

Special sealing 12 mm

402-822.118

Heat resistent gloves,1 pair

402-889.597

combustion tube fordiesel exhaustparticulates multi EA5000

402-812.374

Replacement screw

402-823.079

Removable needles for50 ａnd 100 μl syringes,set of 3 pieces

402-886.248

Waste hose

402-889.206

Septum for rinsingvessel

402-889.533

Syringe 50 μl, withremovable needle,without markings

402-889.534

Syringe 100 μl, withremovable needle,without markings

402-889.547

Gripper for sampleboats

402-889.589

Syringe 10 μl, forAutoinjector, withremovable needle

402-889.592

Syringe 100 μl, forAutoinjector, withremovable needle

402-889.590

Syringe 20 μl, forAutoinjector, withremovable needle

402-889.591

Syringe 40 μl, forAutoinjector, withremovable needle

402-889.186

Removable specialneedles, set of 3pieces

402-815.839

Sealing for sample portMBD

402-889.671

Feed tube for MBD

402-889.672

Hook for MBD

402-889.670

MBD coupling tube,glass

402-889.674

Quartz boat, 40 mm x9 mm, set of 10 pieces

402-889.560

Set of sealingelements horizontal