光栅专场,光栅商家多、资料全面第29组

反射式安全光栅

http://www.gdhualan.com/光电保护装置，主要用于锻压行业，与冲压设备配套保护操作者的人身安全。避免在生产过程中因操作不当或机器出现故障而导致安全事故的发生。适用于机械式压力机、液压式压力机、压膜机、剪板机、折弯机、注塑机、工业机械手、包装设备、生产流水线、家电制造业、立体车库及其它自动化设备，也可用于多面区域保护或防盗。

产品特点：

1、规格品种多，适用范围广：对射式光幕的检测精度(光幕的检测精度=光束通光孔尺寸+光轴间距)有65毫米、80毫米二种规格；适用于3米以下较小台面锻压机械的人身安全保护

2、自检功能完善：当光电保护装置失电或自身出现故障时，确保不向所控制的电器发送错误信号

3、可设备自保功能(根据客户要求)：遮断光幕使压力机滑块停止运行后，光幕恢复通光时，压力机不能恢复运行，必须进行人工复位后，压力机滑块才能再次运行

4、抗干扰能力强：系统对电磁信号、频闪灯光、焊接弧光及周围光源等具有良好的抗干扰能力

5、保护长度大，通用性强，对光容易：反射式光电保护装置保护长度0.4~3米

6、寿命长(输出继电器达到使用寿命后，可更换)，性高

7、抗振性好

8、安装形式多，方便选用

仪器用途：　　本仪器是种光栅型漫反射NIRS，应用广泛主要用于对粉末、颗粒状及涂层等样品的化学、物理性质作定性定量分析，适用于对农产品、食品、医药等领域的营养成分、水分等化学物理性质的快速无损分析测定。特点：● 获两项国实用新型专利● 采用光栅谱扫描● 旋转式样品台，解决样品混合不均匀问题● 原装进口硫化铅检测器带制冷● 积分球反射率95%以上● 采用非球面光路，交叉CT单色器● 串行口外接高档笔记本PC● 仪器小型轻巧，方便用于现场测试● 采用中国农业大学近红外开发研究室的CAUNIRS近红外分析软件● 公司与中国农业大学近红外研究室合作，● 为用户提供、专业的近红外建模及模型维护服务仪器性能：● 波长范围：1300 nm～2500 nm● 波长扫描间隔：4、8、16 nm可选● 波长准确性：≤1nm● 波长重复性：≤1nm● 吸光度重复：0.002A● 信噪比：≥103● 扫描时间：少于2分钟● 圆形样品池规格：40mm内径 × 20mm深度

该公司产品分类：旋转蒸发仪恒温金属浴酶标仪色差仪|色谱仪水分测定仪 sbp产品高压气体基因枪基因枪紫外交联仪细胞融合仪洗地机硬度计洁净工作台辐射检测仪分子杂交仪酶标仪|洗板机黄曲霉毒素检测仪电导率仪水质检测仪|水质测定仪重金属检测仪

TRI-TRONICS公司光栅编码器

Shaft Encoders

R20, R20-P, RG, RJ, RL, RL-P, RS, RS-P Series Shaft encoders are intended for direct coupling to a device shaft, ａnd generate a specific pulse output for each revolution of the device shaft....

Series 20 with Heavy Duty Bearings

The model R20 is an optical shaft encoder in a 2" diameter x 1-3/4" long housing that can be face mounted using three 6-32 x .25" deep mounting holes on a 1.75" diameter bolt circle. The shaft is up to 3/8" diameter, either single or double ended. Electrical connection is through a 16mm circular connector or an attached cable.

Standard Features ａnd Options:

3/8" diameter shaft
Unbreakable code disk
Up to 1200 pulses per revolution
Attached cable or optional connector
Heavy Duty bearings
Short circuit ａnd ESD protected

Popular Models:

R20CQ-500/5 M187R20CQ-500/8-30CSR20M8-200/5-26R20Q-1200/5-26DGS RCR20Q-512/24PR20Q-512/8-30DL M222B

Series 20-P with Heavy Duty Bearings

The model R20-P is an optical shaft encoder in a 2" diameter x 1-3/4" long housing that can be face mounted using three 6-32 x .25" deep mounting holes on a 1.75" diameter bolt circle. The shaft is up to 3/8" diameter, either single or double ended. Electrical connection is through a 16mm circular connector or an attached cable.

The encoder is factory configured with a program that offers one or more features. DIP switches are used to set program parameters. Examples of some of the available features are: selectable pulses per revolution, quadrature (A/B) outputs, direction output, ａnd the anti-jitter feature.

Standard Features ａnd Options:

DIP switch sleectable features
Up to 3/8" shaft diameter, option double ended
Heavy Duty bearings
Unbreakable code disk
Size 20 housing
Short circuit ａnd ESD protected
Up to 1200 pulses per revolution
Attached cable, or 16mm or M12 connector

Popular Models:

R20-P64AJ/8-30S

RG - General Purpose ａnd Economical

A 2.25" diameter incremental encoder with three 6-32 x .25" deep mounting holes on a 1.75" diameter bolt circle. The enclosure is 1.75" long when equipped with an attached 10 ft. (3 meter) cable, or 3" long with a connector.

Standard Features ａnd Options:

Short-Circuit ａnd ESD protection are available on allm odesl with the anti-jitter option, ａnd many other (please inquire)
Surge protection available
CE Marked (specific models only ａnd requires end or side connector)
10-foot / 3-meter attached cable is included at no extra charge.

Popular Models:

RGA-2400/24NPRGA-600/12RGA-600/5RGAQ-10/12 M49RGB-1200/24RGB-240/8-30CERGBQ-240/24CERGBQZ-1200/8-30ERGBQZ-360/24P

General Purpose ａnd Environmentally Sealed

A 2.25" diameter incremental encoder with three 6-32 x .25" deep mounting holes on a 1.75" diameter bolt circle. The enclosure is 3" long with a side connector or end connector. Many modified versions match ECCI encoders.

See the RG encoder for an economical version that is not environmentally sealed.

Standard Features ａnd Options

Shaft: 3/8" x 3/4" length
Short-Circuit, ESD, ａnd Surge protection are available
CE Marked (specific models only)

Popular Models:

RJB-3AJ/24PRJBQ-120/12 M76RJBQ-300/5 M76RJBZ-2400/8-30NPRJM8QZ-500/8-30NP M247SRJQ-100/5 M125RJQ-250/5 M125RJQ-600/5 M125RJQNZ-500/5 M92

RL General Purpose ａnd Heavy Duty

The model RL rotary shaft encoder comes with a 3/8", 1/2", 5/8", 8mm, 10mm, or 3/8-16 or 1/4-20 threaded shaft for heavy duty applications where a face mounted encoder is required. The rugged 3" diameter by 2-3/8" deep enclosure is constructed of 1/4" thick aluminum with a 5, 6, or 10 pin connector on the side.

Metric bolt holes are available - see M96 ａnd M105 modifications below.

***Optional modification number (see modified versions table below)***For other accessory options, see the accessories table below

Notes: * 120AC supply voltage ａnd Triac output require the 3/8" single or double ended shaft.

Note: Not all features are listed. Some combinations are mutually exclusive.

Standard Features ａnd Options

Shaft: 3/8" x 1.25" length, single or double ended. 1/2" x 1.25" length. 5/8" x 1.25" length. 8mm x 32mm. 10mm x 32mm.
Short-Circuit, ESD, ａnd Surge protection are available
CE Marked (specific models only)

RL-P Programmable Heavy Duty Shaft Encoder

The RL-P rotary shaft encoder directly couples to a rotating shaft ａnd produces a specified number of square wave output pulses per revolution of the shaft. The number of pulses per revolution is determined by setting configuration switches accessible through an access port near the connector. Any one of a predefined set of pulses per revolution are available.

It comes with a 3/8", 1/2", 5/8", 8mm, 10mm, or 3/8-16 or 1/4-20 threaded shaft for heavy duty applications where a face mounted encoder is required. The rugged 3" diameter by 2-3/8" deep enclosure is constructed of 1/4" thick aluminum with a 5 or 6 pin connector on the side.

Metric bolt holes are available - see M96 ａnd M105 modifications.

Standard Features ａnd Options:

Heavy duty bearings
3/8", 1/2", 5/8", Metric Shaft Diameters
Double ended 3/8" shaft option
Hollow shaft available - Model HRL-P
Use DIP switches to configure options at installation time
User selectable pulses per revolution
User selectable output circuit
Exclusive "Anti-Jitter" option
Short-circuit ａnd ESD protection
5 vdc, or 8 to 30 vdc supply voltages
1, 2, ａnd 3 output models available
Fully interchangeable with model RL

Popular Models:

RL-P240AJ/8-30RL-P270AJB/8-30RL-P64AJ/8-30

RS Standard 2-1/4" Cube Style Encoder

A 2-1/4" cube incremental encoder with four 6-32 x 1/4" deep mounting holes on a 2" diameter bolt circle located on both ends ａnd the bottom. The enclosure is constructed of 1/8" minimum thick aluminum with a connector ａnd single or double ended shaft. This model is compatible with most cube style encoders on the market.

It is available with 1/4", 5/16", 3/8", or 1/2" shaft diameters. Heavy duty bearings are available with up to 3/8" single ended shaft (see M182 option).

Standard Features ａnd Options:

1/4", 5/16", 3/8", ａnd 1/2" Shaft Diameters
Double ended shaft option
Hollow Shaft Available (see model HRS)
Programmable model availabe (see model RS-P)
Exclusive "Anti-Jitter" circuit for conveyor applications
Single (A), Quadrature (A,B) ａnd Index (Z) outputs
Dual or Triple output Models with different pulses per revolution on each output (A, B, C)
Short ciruit / ESD protection on most models.
Custom Model Available

Popular Models:

RS.5-500/8-30 M166RS.5Q-500/8-30 M166RSAQ-100/10/15CRSB-100/5 M122RSB-10AJ/8-30PRSB-12/8-30P RSB-1200/8-30RSB-2400/5RSB-3/6/8-30 M88RSB-5/10/8-30 M88RSB-5AJ/24PRSB-6AJ/8-30RSBD-235/12RRSBD-300/12RRSBD-80/12R RSBDQ-100/8-30RSBDQ-250/5 M122RSBQ-100/8-30RSBQ-100/8-30PRSBQ-1000/8-30RSBQ-1200/8-30DLRSBQ-30/8-30RSBQ-512/8-30RSC-10/8-30C M214RSC-100/8-30C M214RSC-60/8-30 M143

RS-P User Selectable Pulses per Revolution in a Standard Cube Style

The model RS-P is an optical shaft encoder in a standard 2¼” cube shaped housing that is electrically ａnd physically interchangeable with most cube style encoders on the market. The number of pulses per revolution is determined by setting configuration switches accessible through an access port near the connector. Any one of a predefined set of pulses per revolution are available.

Standard Features ａnd Options

Short-Circuit ａnd ESD protection are standard
Surge protection is available
CE Marked

Popular Models:

RSBD-P64Q/8-30 M172RSB-P.125A/8-30RSB-P.125AJ/8-30RSB-P240AJ/8-30RSB-P64AJ/8-305RSB-P64AJ/8-30CRSB-P64AJ/8-30G

Hollow shaft encoders are designed with either a through-bored shaft or a blind-bored shaft, ａnd intended to mount directly onto a motor or other shaft. This eliminates the need for a shaft to shaft coupling ａnd mounting adapter, resulting in both space ａnd cost savings. The encoder "floats" on the motor shaft. A tether or flexible mounting bracket prevents the encoder from turning, yet accommodates shaft-to-shaft misalignment.An incremental encoder that uses precision measuring wheels to directly measure the movement of a conveyor belt, or to accurately measure moving material.

HS20 - Up to 5/8" / 16mm Diameter Hollow Shaft

The model HS20 is an optical hollow shaft encoder in a 2" diameter housing that mounts directly on an existing shaft assembly. A flexible mounting bracket or tether allows the encoder to float on the shaft without rotating. The HS20 generates up to 3 square wave outputs.

Standard Features ａnd Options:

Up to 5/8" or 16mm shaft bore
Unbreakable code disk
Up to 1200 pulses per revolution
Attached cable or optional connector
Heavy duty bearings
Short circuit ａnd ESD protected

Popular Models:

HS20.405-5AJ/8-30S M210
HS20.5QZ-1200/8-30
HS20.625-100AJ/8-30S3
HS20.625Q-1000/8-30DS
HS20.625Q-256/8-30DS
HS20.625Q-32/8-30DS
HS20.625Q-600/8-30D
HS20.625Q-64/8-30DS
HS20.625Q-64/8-30DS M203
HS20.625QZ-360/5S
HS20B-1200/8-30S
HS20BQ-120/5D
HS20BQ-1200/8-30S
HS20M10-5AJ/8-30 M203
HS20M10-5AJ/8-30S3 M203
HS20M12Q-50/8-30DS
HS20M14QZ-125/5C
HS20M14QZ-35/8-30C
HS20M8Q-1000/8-30

HS25 - 3/8" Diameter Hollow Shaft

The model HS25 is an optical hollow shaft encoder in a 2-1/2" diameter housing that mounts directly on an existing shaft assembly. An anti-rotation pin or flexible mounting bracket allows the encoder to float on the shaft without rotating. The HS25 generates up to 3 square wave outputs.

Standard Features ａnd Options:

Up to 3/8" or 10mm shaft bore diameter
Up to 600 pulses per revolution
Single, quadrature, ａnd index outputs
Direction indicator output option
Anti-jitter feature option
ESD ａnd short circuit protection on most models
5 vdc, 8 to 30 vdc, ａnd other supply voltages
9-pin D-Sub or 4-pin M12 connector

Popular Models:

HS25B-1000/8-30
HS25B-10AJ/24P
HS25B-1200/24
HS25B-1200/8-30
HS25B-240/8-30
HS25B-600/24
HS25B-600/8-30
HS25B-920/8-30C
HS25BQ-240/24
HS25BQZ-360/5C
HS25CQ-360/3/8-30C M158 M179

HS30 - Up to 1-1/8" / 28mm Diameter Hollow Shaft

The model HS30 is an optical hollow shaft encoder in a 3" diameter housing that mounts directly on an existing shaft assembly. A flexible mounting bracket or tether allows the encoder to float on the shaft without rotating. The HS30 generates up to 3 square wave outputs.

Standard Features ａnd Options:

Up to 1/8" or 28mm shaft bore
Unbreakable code disk
Up to 1200 pulses per revolution
Attached cable or optional connector
Heavy duty bearings
Short circuit ａnd ESD protected

Popular Models:

HS30.5Q-500/5S1
HS301.0Q-16/8-30DS
HS301.125QZ-1200/8-30DS1
HS30M25Q-600/8-30
HS30M25QZ-360/8-30
HS30M25QZ-360/8-30S

HRL - Hollow Shaft that fits up to 1" (25mm) diameter shaft

The model HRL is an optical hollow shaft encoder with up to a 1" / 25mm blind shaft bore in a heavy duty aluminum style housing that mounts directly on an existing shaft assembly. A flexible mounting bracket or tether allows the encoder to float on the shaft without rotating. The HRL generates up to 3 square wave outputs.

Standard Features ａnd Options:

10-foot / 3-meter cable included at no extra charge
CE Marked
Surge protection available
Short circuit ａnd ESD protected

Popular Models:

HRL.625-436/8-30C M162 M164
HRL1-168/5 M180
HRL1-360/24
HRL1Q-200/12C

HRS - Cube Style Hollow Shaft fits 1" (25mm) shaft

The model HRS is an optical hollow shaft encoder with up to a 1" / 25mm blind shaft bore in a standard 2-1/4" cube style housing that mounts directly on an existing shaft assembly. A flexible mounting bracket or other type of tether allows the encoder to float on the shaft without rotating. The HRS generates up to 3 square wave outputs.

Standard Features ａnd Options:

CE Marked
Surge protection available
Short circuit ａnd ESD protection are available on most models with the anit-jitter option, ａnd many others (please inquire)

A single-turn, absolute encoder generates a multi-bit binary code word indicating the angular position of the shaft. Each equal sized segment of one shaft rotation is indicated by a unique value. When power is first applied the shaft position is immediately known without having to re-home, even if the shaft is moved when power is off.

11-bit Modular Absolute Encoder

The MR30 is a full function 11-bit, single-turn, digital, absolute position encoder for applications requiring up to 1024 uniquely identifiable codes per revolution. It uses a patented, cost saving technology that relaxes the precise alignment tolerances typically required by conventional absolute encoders by an order of magnitude without sacrificing accuracy. This makes possible a low cost, modular encoder that can be easily assembled by the user.

10-bit Miniature Absolute Encoder

The Photocraft SR12 is a full function, 10-bit, single-turn, digital, rotary absolute position encoder intended for applications requiring miniature size, low cost, ａnd up to 1024 uniquely identifiable positions per revolution. The SR12 outputs the position information in either digital parallel or serial formats, or 0-10vdc analog format. In analog format the SR12 can function as a non-contact potentiometer.

10-bit Industrial Absolute Encoders

The R30 is a 10-bit, single-turn, digital, rotary absolute position encoder intended for industrial applications requiring up to 1024 uniquely identifiable positions per revolution. The SR30 provides up to 10-bits ａnd uses a patented, cost saving technology that relaxes the precise alignment tolerances of conventional absolute encoders by an order of magnitude without sacrificing accuracy. The result is a fully functional, yet lower cost alternative. The SR30 updates the outputs at 1KHz ａnd the SR31 updates at 3KHz.

Wheeled encoders more accurately track the conveyor belt or other material than shaft encoders. Two problems with shaft encoders in this application are: (1) slippage of the conveyor belt on the roller, ａnd (2) inaccuracy of roller diameters. Both of these contribute to inaccuracies that reduce the overall efficiency of a material handling sortation system or precision measuring system. Wheeled encoders ride directly on the moving material, use a wheel tread having a high coefficient of friction, ａnd have a very low starting torque resulting in virtually no slippage of the wheels on the belt. In addition, the wheels are precision ground with exacting tolerances, versus a roller which has a much larger tolerance ａnd its circumference seldom translates into an integral number of encoder pulses per unit of linear movement.

R21 - Compact size ａnd Rugged Construction

The model R21 is an optical shaft encoder in a 2" diameter x 1-7/8" (Ø51mm x 48mm) housing with an integral mounting arm, compatible with a variety of mounting accessories for installation either above or below a moving web or conveyor. When used with the MW-8 (8.00" circumference) or MW-20 (20.00cm circumference) measuring wheel it can accurately track the web or conveyor to within ±.007" or ±.016cm per revolution. This is not a light duty encoder - it was built with heavy duty bearings ａnd solid construction for reliable, long-term operation in continuous duty applications.

Standard Features ａnd Options:

· Generates pulses for accurate linear measurement

· Heavy Duty construction

· Compact size

· Precision 8" or 20cm circumference measuring wheel

· 16mm or M12 connector, or attached cable

· "Anti-Jitter" ａnd other material handling features

· ESD, Short Circuit, Reverse Voltage protection

· Various mounting hardware kits are available

Popular Models:

R21-1000/8-30C
R21-16AJ/8-30S3
R21QZ-1024/5DS

R21-P - Compact size, Rugged Construction, User Selectable Parameters

The model R21 is an optical shaft encoder in a 2" diameter x 1-7/8" (Ø51mm x 48mm) housing with an integral mounting arm, compatible with a variety of mounting accessories for installation either above or below a moving web or conveyor. When used with the MW-8 (8.00" circumference) or MW-20 (20.00cm circumference) measuring wheel it can accurately track the web or conveyor to within ±.007" or ±.016cm per revolution. This is not a light duty encoder - it was built with heavy duty bearings ａnd solid construction for reliable, long-term operation in continuous duty applications. During installation various features, such as the number of pulses per revolution, can be selected by setting configuration switches. The available features depend on the encoder model.

Standard Features ａnd Options:

· Double ended shaft ａnd integral mounting arm

· Unbreakable code disk

· Various programmable features

· Attached cable or optional connector

· Heavy duty bearings

· Short circuit ａnd ESD protected

Popular Models:

R21-P144AJ/8-30S

R22 - Compact size ａnd Rugged Construction

The model R22 is an optical shaft encoder in a 2" diameter x 1-7/8" (Ø51mm x 48mm) housing with an integral mounting arm, compatible with a variety of mounting accessories for installation either above or below a moving web or conveyor. When used with the MW-8 (8.00" circumference) or MW-20 (20.00cm circumference) measuring wheels it can accurately track the web or conveyor to within ±.007" or ±.016cm per revolution. This is not a light duty encoder - it was built with heavy duty bearings ａnd solid construction for reliable, long-term operation in continuous duty applications.

Standard Features ａnd Options:

· double ended shaft ａnd integral mounting arm

· Unbreakable code disk

· Up to 1200 pulses per revolution

· Attached cable or optional connector

· Heavy duty bearings

· Short circuit ａnd ESD protected

Popular Models:

R22-1000/5DS M233
R22-1200/5 M189
R22Q-1000/8-30S3
R22Q-1200/5DS M233
R22Q-1200/5DS
R22Q-1500/8-30S3
R22Q-800/8-30S M203
R22QZ-1200/5-26DHS
R22QZ-1200/5DLS

R22-P - Compact size, Rugged Construction, User Selectable Parameters

The model R22 is an optical shaft encoder in a 2" diameter x 1-7/8" (Ø51mm x 48mm) housing with an integral mounting arm, compatible with a variety of mounting accessories for installation either above or below a moving web or conveyor. When used with the MW-8 (8.00" circumference) or MW-20 (20.00cm circumference) measuring wheels it can accurately track the web or conveyor to within ±.007" or ±.016cm per revolution. This is not a light duty encoder - it was built with heavy duty bearings ａnd solid construction for reliable, long-term operation in continuous duty applications. During installation various features, such as the number of pulses per revolution, can be selected by setting configuration switches. The available features depend on the encoder model (see Currently Available Programs table)

Standard Features ａnd Options:

· Double ended shaft ａnd integral mounting arm

· Unbreakable code disk

· Various programmable features

· Attached cable or optional connector

· Heavy duty bearings

· Short circuit ａnd ESD protected

Popular Models:

R22-P1200QB/5-26DHS
R22-P1200QR/5DLS
R22-P64AJ/8-30S

RH - For precise Linear Measuring Applications

The RH encoder, also known as a Pulse Position Indicator (PPI), generates tracking pulses for web applications, ａnd in particular for material handling sortation applications when used with barcode laser scanners or CCD vision systems. It typically is equipped with two 12 inch or 30 centimeter circumference measuring wheels that ride directly on the conveyor belt or web, eliminating any slippage problems typically encountered with shaft encoders. With its double wheel construction, the encoder is self-aligning when allowed to pivot freely from its integral arm. The encoder’s weight is sufficient to maintain contact when mounted above the moving material. Special mounting accessories are also available for mounting the encoder from below.

For High Resolution Applications the RH-1800/3600 encoder generates both 1800 ａnd 3600 pulses per revolution, making it suitable for high resolution printing ａnd CCD scanner applications. When used with precision 12” circumference measuring wheels (MW-1-B) it generates 150 ａnd 300 pulses per inch of linear movement. Please inquire about other similar models.

Standard Features ａnd Options:

· Generates pulses for accurate linear measurements

· Tracks conveyor movement independent of conveyor roller diameters

· Heavy duty construction

· Precision 12" or 30cm circumference measuring wheels

· Programmable model available - see Model RH-P

· Exclusive "Anti-jitter" circuit for conveyor applications

· Single (A), quadrature (A, B), ａnd index (Z) outputs.

· Short circuit, ESD, reverse voltage protection

Popular Models:

RH-10AJ/120ACT
RH-12/12
RH-12/12P
RH-1200/8-30NP
RH-12AJ/12
RH-12AJ/24P
RH-12AJ/8-30
RH-192/12C
RH-192/12C M148
RH-192AJ/8-30P M131
RH-1AJ/120ACT
RH-2/24P
RH-24/8-30C
RH-240AJ/8-30C,120AJ/8-30C M154
RH-24AJ/12C
RH-2AJ/120ACT
RH-2AJ/24P
RH-2AJ/8-30P
RH-300/5
RH-3600/8-30
RH-3AJ/120ACT
RH-3AJ/24C
RH-3AJ/24P
RH-4/24P
RH-4AJ/120ACT
RH-4AJ/24
RH-4AJ/24P
RH-6/24P
RH-600/8-30
RH-600AJ/5-26P
RH-6AJ/12
RH-6AJ/120ACT
RH-6AJ/24
RH-6AJ/24P
RH-6AJ/8-30
RH-8AJ/24C IW
RHQ-100/24P
RHQ-1000/24C
RHQ-1000/24P
RHQ-1024/5D
RHQ-1200/24P M131
RHQ-1200/5 -30
RHQ-1200/8-30NP
RHQ-256/8-30D
RHQ-360/15C
RHQ-50/24
RHQ-50/24RD
RHQ-600/5D
RHQ-72/5

RH-P - User Selectable Pulses per Revolution

The RH-P encoder, also known as a Pulse Position Indicator (PPI), generates tracking pulses for web applications, ａnd in particular for material handling sortation applications when used with barcode laser scanners or CCD vision systems. The number of pulses per each revolution of the wheel is selectable by setting configuration switches. It typically is equipped with two 12 inch or 30 centimeter circumference measuring wheels that ride directly on the conveyor belt or web, eliminating any slippage problems typically encountered with shaft encoders. With its double wheel construction, the encoder is self-aligning when allowed to pivot freely from its integral arm. The encoder’s weight is sufficient to maintain contact when mounted above the moving material.

Standard Features ａnd Options:

· Progammable via DIP switches at installation time

· User selectable pulses per revolution

· User Selectable Output: Current sinking (NPN), Current sourcing (PNP), NPN or open collector, or Push/Pull Output

· Exclusive "anti-jitter" circuit

· Shourt-circuit ａnd ESD Protection

· 5 vdc, or 8 to 30 vdc Supply voltages

· Mounts either above or below a web, conveyor belt, or roller

· Optional 12 inch or 30 cm. circumference measuring wheels

Popular Models:

RH-P144AJ/8-30 IW
RH-P144AJ/8-30 M126
RH-P144AJ/8-30 M131
RH-P144AJ/8-30
RH-P144AJ/8-30 RC M202
RH-P1500AJB/8-30 M131
RH-P1500AJB/8-30
RH-P1500QB/8-30 M218
RH-P1500QB/8-30
RH-P192/8-30 M196
RH-P240AJ/8-30
RH-P240AJ/8-30 IW
RH-P240AJ/8-30 M131
RH-P240AJ/8-30 M148
RH-P240AJ/8-30
RH-P240AJ/8-30 RC
RH-P240Q/8-30
RH-P300AJQ/8-30C
RH-P600AJB/8-30
RH-P600AJB/8-30C
RH-P600AJB/8-30NP M131 RC
RH-P600AJB/8-30NP RC
RH-P64AJ/8-30 IW M131
RH-P64Q/5
RH-P64Q/8-30

该公司产品分类：光纤传感器光电传感器

OGU 051 P3K-TSSL德国DI-SORIC Industrie-electronic光栅

德国di-soric Industrie-electronic GmbH & Co. KG企业集团是一家专业从事标准和特殊传感器开发和生产的公司，致力于提供工业自动化产品的应用方案和技术支持。公司拥有29 年多的成功行业经验，如今已成为全球最大的传感器生产商之一。今天，已经有超过180 名员工为德国di-soric公司工作。公司总部位于德国斯图加特东部城市 Urbach 。研发及生产的工作由位于多特蒙德南方城市Lüdenscheid的工厂负责。仅在德国就有上千家的客户正在使用di-soric的产品。产品介绍：DI-SORIC Industrie-electronic GmbH & Co. KG光栅、DI-SORIC Industrie-electronic GmbH & Co. KG 光纤、DI-SORIC Industrie-electronic GmbH & Co. KG 发射器、DI-SORIC Industrie-electronic GmbH & Co. KG 接收器、DI-SORIC Industrie-electronic GmbH & Co. KG 转换器、DI-SORIC Industrie-electronic GmbH & Co. KG 传感器、DI-SORIC Industrie-electronic GmbH & Co. KG 放大器、DI-SORIC Industrie-electronic GmbH & Co. KG 感应开关、DI-SORIC Industrie-electronic GmbH & Co. KG 光纤开关、DI-SORIC Industrie-electronic GmbH & Co. KG 光电开关、DI-SORIC Industrie-electronic GmbH & Co. KG 液位开关、DI-SORIC Industrie-electronic GmbH & Co. KG 光电管发生器、DI-SORIC Industrie-electronic GmbH & Co. KG 漫反射光电管、DI-SORIC Industrie-electronic GmbH & Co. KG 料位开关、DI-SORIC Industrie-electronic GmbH & Co. KG 探头、DI-SORIC Industrie-electronic GmbH & Co. KG 电器件、DI-SORIC Industrie-electronic GmbH & Co. KG 电缆、DI-SORIC Industrie-electronic GmbH & Co. KG光纤缆产品类型：DI-SORIC Industrie-electronic GmbH & Co. KG OGU 081 P3K-TSSLDI-SORIC Industrie-electronic GmbH & Co. KG OGU 121 P3K-TSSLDI-SORIC Industrie-electronic GmbH & Co. KG OGU 051 P3K-TSSLDI-SORIC Industrie-electronic GmbH & Co. KG OGL 55/53P2K-IBSDI-SORIC Industrie-electronic GmbH & Co. KG OGL 34/31P2K-IBSDI-SORIC Industrie-electronic GmbH & Co. KG D7C 08 V 03 PSK-TSL DI-SORIC Industrie-electronic GmbH & Co. KG D7C 08 V 03 PSLK DI-SORIC Industrie-electronic GmbH & Co. KG D7C 08 V 06 PSK-TSL DI-SORIC Industrie-electronic GmbH & Co. KG D7C 08 V 06 PSLK DI-SORIC Industrie-electronic GmbH & Co. KG D7C 12 V 02 PSK-IBSL DI-SORIC Industrie-electronic GmbH & Co. KG D7C 12 V 02 PSLK DI-SORIC Industrie-electronic GmbH & Co. KG D7C 12 V 04 PSK-IBSL

该公司产品分类： HYDAC滤芯元件 MAHLE滤芯元件同步电动机异步电动机直流电动机电流继电器高频继电器时间继电器温度继电器电磁继电器固体继电器磁粉制动器磁涡流制动器水涡流制动器多盘式制动器单盘式制动器浮动式制动器双蹄式制动器综合带式制动器带式制动器

S20-0810安全光栅，安全光幕，检测光幕，光幕传感器S2000系列

产品特点此款产品外观大气稳重，结构牢固，耐冲击，安装简便，适合于大型设备。安全光栅工作原理：

安全光栅由红外线发射器和受光器组成，发光器和受光器分别安装在被检测区域的两边，设备工作时发光器发出红外光线照射到受光器上，形成一排光幕。当光幕被遮挡，受光器检测到某路光强度变化后，即可判断出有异物进入光幕传感器设定的危险区域，立刻输出控制信号，通过电缆传输到生产设备控制器，控制器控制设备实现停止运行或防止误启动的目的。

S20-0810型号表示该产品属于S2000系列，分辨率为10mm，由8路间距10mm的红外线组成。

产品安装高度：145mm；

产品检测高度：70mm；

kingsensor安全光栅用途：适用于各式冲床、油压机、剪切机、自动化设备等具有危险性设备、各种大面积区域的安全防护、人体探测感应对人体的安全保护；安装红外线保护装置，检测到有人员身体进入危险区域即可控制自动停机达到保护人身安全目的。

肯森斯安全光栅有多种规格可供用户选择：Kingsensor S2000安全光栅保护器系列：手指探测可选10mm光束间距为分辨率的产品；光束数量可选－8、16、24、32、40、58、56……N束等手掌探测可选20mm光束间距为分辨率的产品；光束数量可选－4、8、12、16、20、24、28……N束等手臂探测可选40mm光束间距为分辨率的产品；光束数量可选－2、4、6、8、10、12、14、16……N束等注明：其它非标准间距和光束数量均可定制。

安全光栅保护器高度：80mm～3000mm均可定制。安全光栅保护器距离：0～3米、0～6米、0～12米可选。

安全光栅保护器信号输出方式：开关量（继电器NO、NC，晶体管NPN、PNP），数字量（RS485数据接口）、模拟量(电压、电流)等。安全光栅状态指示及故障报警功能：通过LED灯指示光幕工作状态，同时系统有自检故障报警功能，根据数码管故障代码判断故障。对于光幕传感器在故障时，指示灯闪烁报警，同时一直保持保护状态，锁死机床等待维修。安全光栅抗保护器干扰能力强：对电磁干扰，频闪灯光、焊接弧光、日光灯、太阳光等光源有良好的抗干扰能力。

光幕传感器防撞击、抗震性强：有多项防撞抗震措施保护产品不受破坏。防尘设计：密封设计，防护等级IP65。安全光栅保护器功能多样化：可用作人身保护、物体检测、尺寸测量、和其它特殊用途，可定制。

附：光幕传感器的精细选型以及技术参数详情请致电本公司或者登录本公司网站选型指南。

undefined

undefined 2000系列编码规则

undefined

该公司产品分类： C2000系列40mm间距 C2000系列20mm间距 C2000系列10mm间距 C3000系列5mm间距 C3000系列2.5mm间距 S4000系列40mm间距 S4000系列20mm间距 S4000系列10mm间距 S2000系列40mm间距 S2000系列20mm间距 S2000系列10mm间距纠偏光幕检测光幕安全光栅

DA 7200连续光谱固定光栅近红外分析仪

DA7200采用固定全息波长扫描和二极管阵列检测技术，光学系统固定。二极管阵列检测和并行处理所有波长信息，可连续采集近红外区域的光学数据，适用于快速无破坏分析液体、膏状、粉状、颗粒状样品的物理和化学特性，如水分、蛋白、脂肪、淀粉、必需氨基酸、干物质、硬度、颗粒度等。可对玉米、小麦等谷物进行单粒、单穗或单株的品质检测。样品在初始状态下可进行分析检测，不需额外的样品杯、槽、石英池。

SMW-GSCSMW-GSC光栅位移传感器自复位探头光栅尺

SMW-GSC光栅位移传感器（光栅电子尺）

光栅尺定义：

光栅尺通过摩尔条纹原理，通过光电转换，以数字方式表示线性位移量的高精度位移传感器。光栅线位移传感器主要应用于直线移动导轨机构，可实现移动量的精确显示和自动控制，广泛应用于金属切削机床加工量的数字显示和CNC加工中心位置环的控制。该产品已形成系列，供不同规格的各类机床选用，量程从10毫米至30米，覆盖几乎全部金属切削机床的光栅电子尺，光栅尺，铣床电子尺，车床电子尺，光栅线位移传感器。

光栅尺参数：

栅距：0.01mm(100线对/mm)、0.02mm(50线对/mm)、0.04mm(25线对/mm)

精度：±0.008mm、±0.01mm、±0.015mm、(20℃ 1000mm)

响应速度：60m/min(0.005mm) 25m/min(0.001mm)

测量范围：10mm～30000mm以内任意选择

分辨率为：0.5u-1u-5u-10u-25u

输出讯号：TTL方波、HTL方波、RS422信号、正弦电压信号1Vp

供应电压：5V、12V、15V、24V

参考标记：间隔25mm、50mm、100mm、200mm、或全行程任意位置设一个绝对位置参考点(ABS)

工作温度：0-55℃ 存储温度：-40℃-55℃

光栅尺主要应用:

1、各类测量机构、仪器的位移测量：弹簧试验机、三坐标机、投影仪

2、各类机床的数显系统：车床、铣床、磨床、镗床、电火花、精密仪器等

3、各类数控机床的配套使用：数控铣、加工中心、数控磨等

4、配接PLC,用于各类自动化机构的位移测量.

产品特点：1、最先进的光学测量系统，采用可靠耐用的高精度五轴承系统设计，保证光学机械系统的稳定性，优异的重复定位性和高等级测量精度。

2、传感器采用密封式结构，性能可靠，安装方便。

3、采用特殊的耐油、耐蚀、高弹性及抗老化塑胶防水，防尘优异，使用寿命长。

4、具体高水平的抗干扰能力，稳定可靠。

5、光源采用进口红外发光二极管，体积小寿命长。

6、信号线采用多层隔离线网及金属软管保护，防水及抗干扰性能优良

7、采用先进的光栅制作技术，能制作各规格的高精度光栅玻璃尺。

深圳市斯铭威科技有限公司，聚生产销售一体化厂家，厂家原装配套仪表，可定制非标！欢迎来电来函

该公司产品分类：拉压力传感器称重传感器智能数显表 LVDT差动变压式位移传感器光栅尺磁致伸缩位移传感器拉绳位移传感器直线位移传感器

SR193i193mm焦距高光通量影像校正光栅光谱仪-SR193i

高光通量影像校正光栅光谱仪特点：1.自适应聚焦

主动聚焦追踪，根据光栅不同的衍射角或者不同的光栅自动调整聚焦镜的位置以保证最佳分辨率
自动聚焦，无需手动调整，仅需要点下按钮即可实现最好的分辨率

2.带有RFID技术的双光栅塔伦

精密的索引和容易使用的舱口设计，可现场升级
自动的光栅识别和光栅参数读取
在轴扫描

3.193nm焦距，光谱分辨率0.21nm@1200g/mm,500nm；0.1nm@2400g/mm，300nm4.F/3.6数值孔径，高光通量设计适合弱光光谱实验5.影像校正光学设计，采用超环面镜允许多通道光纤探测和出色的成像质量通过显微镜和0级光栅6.可作为单色仪单独使用

通过和单点探测器使用光谱范围可拓展至12um
可作为可调谐光源分光器件

7. 双探测器出口，可以配合ANDOR公司的UV-NIR波长的CCD/EMCCD/ICCD/InGaAs，并可以选择狭缝组件作为单色仪来使用8. 银膜元件选项，在NIR/SWIR波段达到最高的效率，当配合InGaAs阵列探测器或者PbS，InSb，MCT单点探测器使用时9. 预调焦，预校准仪器，出厂时单独调教和校准光谱仪和探测器，在用户现场拆箱即可使用10.无缝链接显微镜

可调高度的垫脚以及可供选择连接光谱仪的直接C口接口，透镜接口和笼式接口
15mm宽度的动态狭缝拓展的成像区域和光谱分析可通过同一光路得到

11. MicroManager软件整合

同一软件平台可同时控制ANDOR相机、光谱仪和大量显微镜以及附件
专用的，容易使用的光谱处理界面

12. 紧凑和坚固的设计，完美整合在OEM仪器中和空间有限实验架构中13. USB接口，即插即用，方便易用高光通量影像校正光栅光谱仪主要应用方向：显微光谱吸收-反射-透射率荧光和拉曼光谱瞬态吸收和泵浦探测等离子光谱诊断LIBS

该公司产品分类：激光粒度仪、纳米粒度仪 CMOS相机便携式分光光度计高光谱仪/高光谱成像仪多组分气体分析仪仪器专用电源/高压电源其它光谱仪工业态软件锁相放大器气体报警器/气体探测器/气体传感器光栅光谱仪(单色仪) CCD相机/影像CCD 光学类仪表光度仪、雾度仪、光泽度仪光学仪器组件光学计量仪器色度仪 X射线探测装置激光拉曼光谱(RAMAN) 光纤光谱仪

newfiber光纤光栅水位计|激光水位计|安全稳定免维护

一、激光水位计系统特点1、激光测距具有测量精度高、速度快、量程宽、不受环境因素影响等特点，可适用于各种不同条件下复杂环境的水位精密测量。2、激光水位计水位信息的采集、检测、传输均采用无源设计，室外机无任何带电部分，本质安全、真正做到防雷击、抗电磁干扰。3、不同于一般水位计产品只具备水位的测量与输出功能，激光水位计系统具备完整的数据测量、检测、传输、分析、水位分级预警，远程WEB访问获取数据等功能，系统可作为独立水位预警平台使用。4、激光水位计系统提供RS485、RS323、RJ48、GPRS/3G、4-20mA模拟量数据输出接口,兼容当前主流周边设备。5、激光水位计无需建立静水井等附属工程，安装工程量小，全电子结构设计，无任何机械部件、后期免维护。二、激光水位计主要技术参数激光水位计最大测量范围:200M激光水位计精度：±3mm 分辨率：1mm激光水位计测量方式：连续测量数据采集时间：1秒防护等级：IP55,可有效防淋雨输出：4-20mA模拟量输出、RS485、网口、RS232、、USB、GSM模块工作电源：工作电源电压AC（187~240）V，DC：12V~24V（两线制）交流电源频率：50HZ±2HZ环境温度：-10℃~55℃储存温度：-10℃~60℃（终端）相对湿度：≤95%RH（40±2℃）（无结露）安装：安装简单、安装成本低，还可以倾斜安装辅助建筑物：无需土建工程、只需将水位计测量部分利用支架或水工建筑固定即可维护：免维护激光水位计优点：量程大、精度高、稳定性好、成本低、无需建测井。激光水位计应用领域：适用于湖泊、河道、水库、明渠、潮汐、城市水文水位等水位监测.激光水位计安装方式：垂直/倾斜更多关于激光水位计的详细信息欢迎致电：李小姐扣扣：2242517656

该公司产品分类：磁致伸缩液位传感器磁致伸缩液位计电子水尺激光水位计城市水文监测系统盐酸储罐液位计 lng储罐液位计液化气储罐液位计丙烷储罐液位计酒精储罐液位计焦油储罐液位计卧式储罐能装液位计地埋储罐液位计地下油罐液位计油罐液位计油罐车液位计激光油罐液位计重油罐液位计油罐液位计厂家油罐电子液位计

WDS-4C型组合式多功能光栅光谱仪WDS-4C型

【商品简介】

WDS-3型组合式多功能光栅光谱仪

组合式多功能光栅光谱仪规格参数：波长范围：200-800nm焦距：300nm相对孔径：D/F=1/7光栅条数：1200L/mm或600/mm杂散光：≤0.3%T波长精度：±0.4nm外型尺寸：370*280*200（mm）狭缝：宽度0-2mm连续可调　示值0.01mm/格　　　最大宽度20nm 谱线半宽度：波长在589出狭缝高3mm 宽0.2mm谱线半宽度 ≤0.2nm接收单元：光电倍增管接口：USB

WDS-4型组合式多功能光栅光谱仪组合式多功能光栅光谱仪规格参数：焦距：300mm相对孔径：D/F=1/7杂光度：≤0.3%T分辨率：在300nm处可分辨聚苯乙烯七个峰（透过率方式）接收单元：TGS热释电探测器、硫化铅探测器、镉汞光探测器等接口：USB外形尺寸：370*280*200（mm）

型号	波长范围（nm）	闪耀波长（nm）	波长精度（nm）	波长重复性（nm）	光栅条数（L/mm）
WDS-4	800-1500	750	±2	1	600
WDS-4A	1000-3000	1400	±4	2	300
WDS-4B	2500-5000	5000	±6	3	100
WDS-4C	2500-15000	双闪耀	±8	4	66

该公司产品分类：真空度计日本理音日本小野欣锐仪器德国Novi 德国百瑞高台湾泰仕TES 德国德图testo 美国雷泰Raytek 日本加野KANOMAX 日本日置HIOKI 日本共立KYORITSU 香港希玛SMART 德国QBL 意大利哈纳HANNA 美国联合系统美国ESC 美国斯德克韩国卡利安株式会社德国喜利得HILTI

反射式安全光栅

S400光栅漫反射型近红外仪器产品参数

TRI-TRONICS公司光栅编码器

OGU 051 P3K-TSSL德国DI-SORIC Industrie-electronic光栅

S20-0810安全光栅，安全光幕，检测光幕，光幕传感器S2000系列

DA 7200连续光谱固定光栅近红外分析仪

SMW-GSCSMW-GSC光栅位移传感器自复位探头光栅尺

SR193i193mm焦距高光通量影像校正光栅光谱仪-SR193i

newfiber光纤光栅水位计|激光水位计|安全稳定免维护

WDS-4C型组合式多功能光栅光谱仪WDS-4C型

最新产品