思达电批扭力测试仪专场,思达电批扭力测试仪商家多、资料全面阿仪网

CEDAR思达电批扭力测试仪

一、测试范围：

0.001~1N.m

0.01~10kgf.cm

0.01~9Lbf.in

二、技术参数：

误差：±0.5%

功能：LC:LCD液晶显示，RS：带RS232输出口，PO：电源自动关闭功能，IO：设定自动清零

外型尺寸：155(W)×125(D)×55(H)

配件：连接头SJ10/包装盒/AC充电器各一个

测量方法：可通过批嘴头或六角头进行测量。

产地：日本

CD-100CEDAR思达电批扭力测试仪

日本思达牌电批扭力测试仪

型号	DI-9-08	DI-9-08	CD-10	CD-100
测试范围	0.1~800mN.m 0.001~8kgf.cm 0.001~7Lbf.in	0.001~8N.m 0.01~80kgf.cm 0.01~70Lbf.in	0.001~1N.m 0.01~10kgf.cm 0.01~9Lbf.in	0.01~10N.m 0.1~100kgf.cm 0.1~90Lbf.in
误差	±0.5%		±0.5%
功能	LC:LCD液晶显示，RS：带RS232输出口，PO：电源自动关闭功能，IO：设定自动清零
外型尺寸	155W×125D×55H
配件	测量头OW025/OW10包装盒/AC充电器各一个	测量头OW020/OW60包装盒/AC充电器各一个	连接头SJ10/包装盒/AC充电器各一个	连接头SJ50包装盒 /AC充电器各一个

CD-10CEDAR思达电批扭力测试仪

日本思达牌电批扭力测试仪

型号	DI-9-08	DI-9-08	CD-10	CD-100
测试范围	0.1~800mN.m 0.001~8kgf.cm 0.001~7Lbf.in	0.001~8N.m 0.01~80kgf.cm 0.01~70Lbf.in	0.001~1N.m 0.01~10kgf.cm 0.01~9Lbf.in	0.01~10N.m 0.1~100kgf.cm 0.1~90Lbf.in
误差	±0.5%		±0.5%
功能	LC:LCD液晶显示，RS：带RS232输出口，PO：电源自动关闭功能，IO：设定自动清零
外型尺寸	155W×125D×55H
配件	测量头OW025/OW10包装盒/AC充电器各一个	测量头OW020/OW60包装盒/AC充电器各一个	连接头SJ10/包装盒/AC充电器各一个	连接头SJ50包装盒 /AC充电器各一个

CD-10、CD-100思达电批扭力测试仪

日本思达牌电批扭力测试仪

型号	DI-9-08	DI-9-08	CD-10	CD-100
测试范围	0.1~800mN.m 0.001~8kgf.cm 0.001~7Lbf.in	0.001~8N.m 0.01~80kgf.cm 0.01~70Lbf.in	0.001~1N.m 0.01~10kgf.cm 0.01~9Lbf.in	0.01~10N.m 0.1~100kgf.cm 0.1~90Lbf.in
误差	±0.5%		±0.5%
功能	LC:LCD液晶显示，RS：带RS232输出口，PO：电源自动关闭功能，IO：设定自动清零
外型尺寸	155W×125D×55H
配件	测量头OW025/OW10包装盒/AC充电器各一个	测量头OW020/OW60包装盒/AC充电器各一个	连接头SJ10/包装盒/AC充电器各一个	连接头SJ50包装盒 /AC充电器各一个

规格		CD-100	CD-10
测试范围		3.0-800.0 mNm	0.030-8.000 N叮
精度		8000-500 digit 0.5% 499-30 digit within3digit
显示单位		lbfin-kgfcm-Nm
归零		Return to zero by pressing clear button.
Data spec.	Data output	Based on RS232C Baud rate:9600
Power supply	Auto power off	自动电源关闭 10 min.
	Battery drive	Ni-Cd 1.2V 5cells1200mAh
充电时间		8hrs.
连续充电时间		20hrs.
自动归零		配备自动归零装置
尺寸		W:155D:125H:30 / 1kg
附件		Measuring joint SJ10/50	Measuring joint SJ10

DI-IM-IP500日本思达电批扭力测试仪

Management of air tool / oil pulse tool

仠Torque Tester 丂DI-1M-IP丂series

Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features 仩Blow counter. The total number of blows within fixed timetorque measured value are displayed. 仩 Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. 仩RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) 仩 It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.

Specification		俢俬-侾俵-俬俹俆侽	俢俬-侾俵-俬俹俀侽侽	俢俬-侾俵-俬俹俆侽侽
Measuring range (at the time of Track)		0.30乣50 N 3.0乣500 kgf丒cm 3.0乣430 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Peak down Operating range		0.70N?/span>m乣, 7.0kgf丒cm/ lbf丒in乣	7.0N?/span>m乣, 70kgf丒cm/ lbf丒in乣
Accuracy		亇0.5亾乮F/S乯(499 or less digit亇3digit)
Display		The 4 figures digital display of LED
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold
	T-R Track	Indication of real time torque value.
	P-D Peak down	Indication peak down pointhold.
Display zero clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
Blow	Measurement range	Zero to 99 blow
	Measurement time	0.1 - 9.9 seconds
Data output		RS232C conformity (baud rate 9600)
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 700mAh
Auto power save		5 minutes no use, automatically switch off.
Charging time		From empty - less than 6hours
Continunous working time		8 hours
Meter part丂Weight		About 600g
Detection part丂Weight		about 600g	about 1kg	about 2.5kg
Meter part丂Outside size		146(W)亊115(D)亊48(H) 乮It does not contain by the projection part乯
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		Attache case	乗	乗
		AC/DC adaptor (Please choose AC adaptor out of 120V,230V.)
		An inspection report, a proofreading certificate, traceability system figure

Detection machine size figure				Detection machine outside figure
Form	俬俹俆侽	俬俹俀侽侽	俬俹俆侽侽
俙	兂50	兂60	兂80
俛	63	73	99
俠	10	10	15.5
俢	兂90	兂110	兂140
俤	兂74	兂90	兂116
俥(Three division)	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	9.5倱倯	12.7倱倯	19倱倯
Weight	632g	1.8kg	3kg

CD-10、CD-100日本思达电批扭力测试仪

日本思达牌电批扭力测试仪

型号	DI-9-08	DI-9-08	CD-10	CD-100
测试范围	0.1~800mN.m0.001~8kgf.cm0.001~7Lbf.in	0.001~8N.m0.01~80kgf.cm0.01~70Lbf.in	0.001~1N.m0.01~10kgf.cm0.01~9Lbf.in	0.01~10N.m0.1~100kgf.cm0.1~90Lbf.in
误差	±0.5%		±0.5%
功能	LC:LCD液晶显示，RS：带RS232输出口，PO：电源自动关闭功能，IO：设定自动清零
外型尺寸	155W×125D×55H
配件	测量头OW025/OW10包装盒/AC充电器各一个	测量头OW020/OW60包装盒/AC充电器各一个	连接头SJ10/包装盒/AC充电器各一个	连接头SJ50包装盒/AC充电器各一个

规格		CD-100	CD-10
测试范围		3.0-800.0 mNm	0.030-8.000 N叮
精度		8000-500 digit 0.5% 499-30 digit within3digit
显示单位		lbfin-kgfcm-Nm
归零		Return to zero by pressing clear button.
Data spec.	Data output	Based on RS232C Baud rate:9600
Power supply	Auto power off	自动电源关闭 10 min.
	Battery drive	Ni-Cd 1.2V 5cells1200mAh
充电时间		8hrs.
连续充电时间		20hrs.
自动归零		配备自动归零装置
尺寸		W:155D:125H:30 / 1kg
附件		Measuring jointSJ10/50	Measuring jointSJ10

CD-100M日本思达电批扭力测试仪

日本思达牌电批扭力测试仪

型号	DI-9-08	DI-9-08	CD-10	CD-100
测试范围	0.1~800mn.m0.001~8kgf.cm0.001~7lbf.in	0.001~8n.m0.01~80kgf.cm0.01~70lbf.in	0.001~1n.m0.01~10kgf.cm0.01~9lbf.in	0.01~10n.m0.1~100kgf.cm0.1~90lbf.in
误差	±0.5%		±0.5%
功能	lc:lcd液晶显示，rs：带rs232输出口，po：电源自动关闭功能，io：设定自动清零
外型尺寸	155（w）×125（d）×55（h）
配件	测量头ow025/ow10包装盒/ac充电器各一个	测量头ow020/ow60包装盒/ac充电器各一个	连接头sj10/包装盒/ac充电器各一个

该公司产品分类：扭力扳手测试仪日本三丰Mitutoyo测试仪日本强力高斯计/磁性表座日本佐藤温湿度记录仪日本得乐测厚仪/橡胶硬度计日本PEAK放大镜台湾固纬测试仪器日本皮带张力计日本新宝数显推拉力计瑞士TETKO丝网张力计上海英展电子秤日本东日扭力扳手日本中村KANON测力工具

CD-10、CD-100日本思达电批扭力测试仪

日本思达牌电批扭力测试仪

型号	DI-9-08	DI-9-08	CD-10	CD-100
测试范围	0.1~800mN.m0.001~8kgf.cm0.001~7Lbf.in	0.001~8N.m0.01~80kgf.cm0.01~70Lbf.in	0.001~1N.m0.01~10kgf.cm0.01~9Lbf.in	0.01~10N.m0.1~100kgf.cm0.1~90Lbf.in
误差	±0.5%		±0.5%
功能	LC:LCD液晶显示，RS：带RS232输出口，PO：电源自动关闭功能，IO：设定自动清零
外型尺寸	155W×125D×55H
配件	测量头OW025/OW10包装盒/AC充电器各一个	测量头OW020/OW60包装盒/AC充电器各一个	连接头SJ10/包装盒/AC充电器各一个	连接头SJ50包装盒/AC充电器各一个

规格		CD-100	CD-10
测试范围		3.0-800.0 mNm	0.030-8.000 N叮
精度		8000-500 digit 0.5% 499-30 digit within3digit
显示单位		lbfin-kgfcm-Nm
归零		Return to zero by pressing clear button.
Data spec.	Data output	Based on RS232C Baud rate:9600
Power supply	Auto power off	自动电源关闭 10 min.
	Battery drive	Ni-Cd 1.2V 5cells1200mAh
充电时间		8hrs.
连续充电时间		20hrs.
自动归零		配备自动归零装置
尺寸		W:155D:125H:30 / 1kg
附件		Measuring jointSJ10/50	Measuring jointSJ10

DI-IM-IP500日本思达电批扭力测试仪

Management of air tool / oil pulse tool

仠Torque Tester 丂DI-1M-IP丂series

Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features 仩Blow counter. The total number of blows within fixed timetorque measured value are displayed. 仩 Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. 仩RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) 仩 It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.

Specification		俢俬-侾俵-俬俹俆侽	俢俬-侾俵-俬俹俀侽侽	俢俬-侾俵-俬俹俆侽侽
Measuring range (at the time of Track)		0.30乣50 N 3.0乣500 kgf丒cm 3.0乣430 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Peak down Operating range		0.70N?/span>m乣, 7.0kgf丒cm/ lbf丒in乣	7.0N?/span>m乣, 70kgf丒cm/ lbf丒in乣
Accuracy		亇0.5亾乮F/S乯(499 or less digit亇3digit)
Display		The 4 figures digital display of LED
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold
	T-R Track	Indication of real time torque value.
	P-D Peak down	Indication peak down pointhold.
Display zero clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
Blow	Measurement range	Zero to 99 blow
	Measurement time	0.1 - 9.9 seconds
Data output		RS232C conformity (baud rate 9600)
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 700mAh
Auto power save		5 minutes no use, automatically switch off.
Charging time		From empty - less than 6hours
Continunous working time		8 hours
Meter part丂Weight		About 600g
Detection part丂Weight		about 600g	about 1kg	about 2.5kg
Meter part丂Outside size		146(W)亊115(D)亊48(H) 乮It does not contain by the projection part乯
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		Attache case	乗	乗
		AC/DC adaptor (Please choose AC adaptor out of 120V,230V.)
		An inspection report, a proofreading certificate, traceability system figure

Detection machine size figure				Detection machine outside figure
Form	俬俹俆侽	俬俹俀侽侽	俬俹俆侽侽
俙	兂50	兂60	兂80
俛	63	73	99
俠	10	10	15.5
俢	兂90	兂110	兂140
俤	兂74	兂90	兂116
俥(Three division)	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	9.5倱倯	12.7倱倯	19倱倯
Weight	632g	1.8kg	3kg

DI-IM-IP200日本思达电批扭力测试仪

Management of air tool / oil pulse tool

仠Torque Tester 丂DI-1M-IP丂series

Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features 仩Blow counter. The total number of blows within fixed timetorque measured value are displayed. 仩 Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. 仩RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) 仩 It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc.

Specification		俢俬-侾俵-俬俹俆侽	俢俬-侾俵-俬俹俀侽侽	俢俬-侾俵-俬俹俆侽侽
Measuring range (at the time of Track)		0.30乣50 N 3.0乣500 kgf丒cm 3.0乣430 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Peak down Operating range		0.70N?/span>m乣, 7.0kgf丒cm/ lbf丒in乣	7.0N?/span>m乣, 70kgf丒cm/ lbf丒in乣
Accuracy		亇0.5亾乮F/S乯(499 or less digit亇3digit)
Display		The 4 figures digital display of LED
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold
	T-R Track	Indication of real time torque value.
	P-D Peak down	Indication peak down pointhold.
Display zero clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
Blow	Measurement range	Zero to 99 blow
	Measurement time	0.1 - 9.9 seconds
Data output		RS232C conformity (baud rate 9600)
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 700mAh
Auto power save		5 minutes no use, automatically switch off.
Charging time		From empty - less than 6hours
Continunous working time		8 hours
Meter part丂Weight		About 600g
Detection part丂Weight		about 600g	about 1kg	about 2.5kg
Meter part丂Outside size		146(W)亊115(D)亊48(H) 乮It does not contain by the projection part乯
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		Attache case	乗	乗
		AC/DC adaptor (Please choose AC adaptor out of 120V,230V.)
		An inspection report, a proofreading certificate, traceability system figure

Detection machine size figure				Detection machine outside figure
Form	俬俹俆侽	俬俹俀侽侽	俬俹俆侽侽
俙	兂50	兂60	兂80
俛	63	73	99
俠	10	10	15.5
俢	兂90	兂110	兂140
俤	兂74	兂90	兂116
俥(Three division)	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	9.5倱倯	12.7倱倯	19倱倯
Weight	632g	1.8kg	3kg