BKZ45NLE-63系列漏电断路器,适用于交流50Hz或60Hz,额定电压单相220V,三相380V及以下额定电流1-63A的电路中,具有漏电、过载、短路等保护功能。本产品体积小、重量轻、部件通用性强,外型美观,导轨安装,使用方便。 该产品适用于工业、商业、高层建筑和民用住宅等各种场所,产品符合GB6829-95、IEC898-95、IEC755标准。
3KW改装厂专用发电机优势:
1)完美的输出波形,畸变率2.5%以下;
2)优异的省油性能,节约燃油费用:采用了负载大小自动调节转速的先进的节能技术;
3)轻巧化设计,实现超轻量与小型化:采用铃鹿技术领先的高速多极发电机和变频系统与动力的部分结合,去除了飞轮,实现了超轻量与小型化;
4)强劲的输出功率,燃料消耗更低;
5)出的静音效果,带来安静效果。
型号 | SHL4000TM | |
发电机 | 类型 | 数码变频/正弦波 |
额定交流输出(KW) | 3.1 | |
最大交流输出 (KW) | 3.2 | |
频率 (Hz) | 50Hz/60Hz | |
电压 (v) | 110/120/220V/230/240 | |
功率因数 cos Φ | 1 | |
直流输出 | 12V/8.3A | |
发动机 | 型号 | SUZUKA168F |
类型 | 风冷/单缸/4冲程汽油发动机 | |
缸径× 冲程 | 67×65 | |
排量 ml | 229CC | |
额定功率 kw | 4.5 | |
最大功率 kw | 4.8 | |
点火方式 | T.D.I | |
点火方式 | Unleaded Gasoline | |
油箱容量 L | 13 | |
油耗 h | 450g/kw.h | |
发动机机油容量 L | 0.8 | |
启动方式 | 电启动 | |
持续工作时间 (小时) | 7 | |
噪音(7m) | 59(7m) | |
标准配置 | 指示灯 | O |
交流过载保护 | O | |
交流插座 | O | |
可选配置 | 直流插座(12v/8.3A) | "T" or "\ /" 型 |
直流保护 | O | |
尺寸 | 包装尺寸 mm | 650×510×565 |
净重/毛重 kg | 55/60 | |
20FT unit | 140 sets | |
40HQ unit | 280 sets |
产品简介
可溶性聚四氟乙烯(PFA)溶样罐、样品瓶:有非凡的化学耐受性,几乎可耐受所有的化学溶剂。可用来长期存放试剂和标准品而并不用担心有其他杂质析出。从离地1.2米高处落下,瓶体不破裂,瓶盖不脱落,不泄漏,敞口可高压灭菌,外底平面设计可用电热板加热、蒸压。参数规格
品名 | 规格(ml) | 材质 |
可溶性聚四氟乙烯(PFA) 溶样罐、样品瓶 | 0.25 | PFA |
3 | ||
7 | ||
15 | ||
30 | ||
60 |
根据实验要求,有U型、V型、平底等设计。V型底的设计,更加方便少量样品的集中收集。U型底设计适用于物化探样品的检测。常配套我公司的电热板使用,尤其是带孔赶酸电热板效果佳。广泛用于各种敏感分析样品的制备和存储,也可作为样品的反应容器;尤其广泛应用于地质地矿实验样品的消解和溶样,配套ICP分析等实验。
如:西北核工业研究所、厦门大学、宜昌地质矿产研究所、杭州地质矿产研究所、中科院南京土壤研究所、中科院寒旱所、南京地质矿产研究所、核工业北京地质研究院、兰州地质研究所等用来存放高纯试剂及标准样品。
可以定制圆形底、内锥形底的管型瓶。
产品特点
1.耐强酸、强碱、王水、魔酸、氢氟酸和各种有机溶剂;
2.低析出:低的金属离子溶出和析出,是储存标准物质、强腐蚀性、昂贵超高纯试剂的佳器皿;
3.耐高低温:使用温度-200~+260℃;
4.防污染:低的金属元素空白值低;
5.非常适用于痕量、超痕量分析、同位素分析等高端实验室,是目国内外洁净的实验分析器皿。
PFA系列产品:PFA试剂瓶,PFA溶样罐,PFA量杯,PFA烧杯,PFA滴瓶,PFA洗瓶,PFA消解管、离心管,PFA消解瓶,PFA分配器,PFA容量瓶,PFA烧瓶,PFA洗气瓶,PFA蒸发皿。
公司介绍
Name of the company(English):Nanjing Ruinik Technology Development Co., Ltd.E-mail:138 138 88374@163.com
Web: http://www.njrnk.comNanjing Nick technology development co., LTD
The brief introduction to the company:Our company is located in the high-tech business incubator, Maigao Bridge in Nanjing-an ancient capital with six dynasties. It is a modern enterprise integrating research ,development, production, and sales. The company boasts technology research and development team with exquisite and professional knowledge, neat and bright workshop and advanced apparatus equipment with technical abundance. Our goal is to trace analysis of production research and develop the most perfect domestic vessel and to make the customer satisfied is our eternal pursuit. We always adhere to the "focus on quality, customer first" business philosophy, which has long established good cooperative relations with customers. We have set up our own reputation and brand among our counterparts. The company will, as always, provide more comfortable services for the customers!
Vision: We aim to manufacture trace analysis instruments and apparatus with global competitiveness
Mission: We will make the sample pretreatment as simple as possible
Values: We hold the idea of “customer first, teamwork, appreciating and dedicating” ,embrace changes honestly and positively, bear the results-focused in mind so as to make contribution to the society.
Goal: We will trace analyze the vessels - your satisfaction is our pursuit!
Company philosophy: build a harmonious team for scientific development and quality-focused
We will concentrate our attention on more upon your trust!
Application fields: trace and ultra trace analysis; chemistry and chemical engineering, nuclear and geology, photovoltaic electron, food inspection, medicine and environmental protection, physical and chemical environment of the earth, biology, geology, environmental protection, pharmacy, PV, food
Main products:
1. Trace consumables analysis including FEP, PFA, PTFE Teflon series products, digestion system , microwave digestion instrument in cans.
2. Apparatus: acid purification device, hot plate, cast acid plate,digestion system ,
3.Customized products: We will provide various kinds of fluorine plastic products, microwave digestion instrument in cans, hot plate, digestion system and cast acid plate according to the requirements of costumers.
不锈钢测定液Ni20:操作方法:滴一小滴测定液于待测金属表面,瞬间通电氧化,1、若无玫瑰红出现直接生成淡黄色或淡白色,表明该材料含Ni<19.5%;2、若生成玫瑰红络合物且不褪色,表明该材料含Ni≥19.5%。注意通电氧化有颜色即停止,一般颜色较淡。
利达不锈钢快速测定液使用说明书
【SGH-300高纯氢气发生器的参数说明】 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
温州瑞昕仪器有限公司
温州瑞昕仪器有限公司是从事工业用检测仪器、理化分析仪器、计量仪器产品的销售、服务、维修一体的公司。欢迎您的咨询订购,联系方式:
公司电话:0 5 7 7-6 6 8 8 6 0 1 7
传真:
邮箱:rxin17@163.com
网址:http://www.rxin17.com/
联系人:
陈进碗 手机:1 3 7 5 8 7 6 8 8 1 3 QQ:124677072
ZW8-12外形尺寸图 | ZW8-12G外形尺寸图 |
While Mobil SHC 600 Series are generally compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of Mobil SHC 600 Series products, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits. Mobil SHC 600 Series oils are compatible with most NBR, FKM and most other elastomeric seal materials that are used with mineral oils. There is the potential for substantial variations in the elastomers. For best results, consult your equipment supplier, seal manufacturer, or your local company representative to verify compatibility.Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear and bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. They are particularly effective in applications where the maintenance costs of component replacement, system cleaning and lubricant changes are high. Specific applications require selection of the appropriate viscosity grade and include:
Mobil SHC 600 Series meets or exceeds the requirements of: | 624 | 625 | 626 | 627 | 629 | 630 | 632 | 634 | 636 | 639 |
AGMA 9005 E02 | X | X | X | X | X | X | X | X | X | X |
DIN 51517-3 CLP | X | X | X | X | X | X | X | |||
ISO 12925-1 CKB | X | |||||||||
ISO 12925-1 CKD | X | X | X | X | X | X | X | X | X |
Mobil SHC 600 Series has the following builder approvals: | 624 | 625 | 626 | 627 | 629 | 630 | 632 | 634 | 636 | 639 |
Fives Cincinnati | P-63 P-80 | P-76 | P-77 | P-34 | P-78 | |||||
SIEMENS AG Flender gear units, T 7300, Table A-c, Flender Code No. | A36 | A35 | A34 | A33 | A32 | A31 | ||||
SEW Eurodrive: SEW IG CLP HC SEW SG CLP HC | 32 32 | 68 68 | 150 150 | 220 220 | 320 | 460 460 | 680 | 1000 |
Typical Properties
Mobil SHC 600 Series | 624 | 625 | 626 | 627 | 629 | 630 | 632 | 634 | 636 | 639 |
ISO Viscosity Grade | 32 | 46 | 68 | 100 | 150 | 220 | 320 | 460 | 680 | 1000 |
Viscosity, ASTM D 445 | ||||||||||
cSt @ 40ºC | 32 | 46 | 68 | 100 | 150 | 220 | 320 | 460 | 680 | 1000 |
cSt @ 100ºC | 6.3 | 8.5 | 11.6 | 15.3 | 21.1 | 28.5 | 38.5 | 50.7 | 69.0 | 98.8 |
Viscosity Index, ASTM D2272 | 148 | 161 | 165 | 162 | 166 | 169 | 172 | 174 | 181 | 184 |
Pour Point, ºC, ASTM D5950 | -57 | -54 | -51 | -45 | -39 | -36 | -33 | -30 | -30 | -27 |
Flash Point, ºC, ASTM D 92 | 236 | 225 | 225 | 235 | 220 | 220 | 225 | 228 | 225 | 222 |
Density @ 15°C (60°F) (g/cc) ASTM D4052 | 0.85 | 0.85 | 0.86 | 0.86 | 0.86 | 0.87 | 0.87 | 0.87 | 0.87 | 0.87 |
Appearance, visual | Orange | Orange | Orange | Orange | Orange | Orange | Orange | Orange | Orange | Orange |
TOST, ASTM D 943 mod, hours | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ |
RPVOT, ASTM D 2272, minutes | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 |
Rust protection, ASTM D665B, Synthetic Sea Water | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass |
Water Separability, ASTM D1401,Min. to 37 ml water @ 54ºC | 10 | 15 | 15 | - | - | - | - | - | - | - |
Water Separability, ASTM D1401,Min. to 37 ml water @ 82ºC | - | - | - | 15 | 20 | 20 | 20 | 20 | 20 | 25 |
Copper Corrosion, ASTM D130, 24 hrs @ 121ºC | 1B | 1B | 1B | 1B | 1B | 1B | 1B | 1B | 1B | 1B |
Foam Test, ASTM D892, Seq I,II,IIITendency / Stability, ml/ml | 15/0, 20/0, 25/0 | 10/0, 30/0, 10/0 | 10/0, 20/0, 10/0 | 0/0, 10/0, 0/0 | 0/0, 0/0,0/0 | 0/0, 10/0, 0/0 | 0/0,0/0,0/0 | 0/0,0/0,0/0 | 0/0,0/0,0/0 | 0/0, 0/0, 0/0 |
FZG gear scuffing test, A/8.3/90, ISO 14635-1 (mod), Failure Stage | 11 | 12 | 12 | 12 | 13 | 13+ | 13+ | 13+ | 13+ | 13+ |
FAG FE8 Bearing Wear Test 7.5/80-80 ((DIN 51819-3) Roller Wear (mg) |
韩国 SANG-A相阿3A三A快插接头 快速接头 金属快速接头 金属快插接头 公母头。
SANG-A CH22 CH23 CH24 CH44 CH46 CH48 CM21 CM22 CM23 CM24 CM44 CM46 CM48 CF22 CF23 CF24 CF44 CF46 CF48 CN21 CN22 CN23 CN24 CN25 CN26 HH22 HH23 HH24 HH44 HH46 HH48 SANWO HM22 HM23 HM24 HM44 HM46 HM48 HF22 DANHI HF23 HF24 HF44 HF46 HF48 HN21 HN22 HN23 HN24 HN25 HN26 HSH22 HSH23 HSH24 HSM22 HSM23 HSM24 HSF22 HSF23 HSF24 HN21 HN23 HN24 MCH22-SZNDC MCH23-SZNDC MCH24-SZNDC SANG-A MCM22-SZNDC MCM23-SZNDC SANWO MCM24-SZNDC MCF22-SZNDC MCF23-SZNDC MCF24-SZNDC MCN21-SZNDC MCN23-SZNDC MCN24-SZNDC MCN-S21SZNDC MCN-S23SZNDC MCN-S24SZNDC MHH22-SZNDC MHH23-SZNDC MHH24-SZNDC MHM22-SZNDC DANHI MHM23-SZNDC MHM24-SZNDC SANG-A MHF22-SZNDC MHF23-SZNDC MHF24-SZNDC MHN21-SZNDC MHN23-SZNDC MHN24-SZNDC MHN-S21SZNDC MHN-S23SZNDC MHN-S24SZNDC MLY22 MLW22 MLR22 MLR23 HP1C BRSAA HP2C HP3C HP4C HP6C HP8C HP10C SANWOHP12C HP16C HP1H HP2H HP3H HP4H HP6H HP8H DANHI HP10H HP12H HP16H KCH21BRASS KCH22 KCH23 KCM21 KCM22 KCM23 KCF21 KCF22 KCF23 KHH21 KHH22 KHH23 KHH24 KHM21 KHM22 KHM23 KHF21 KHF22 LCH22STEEL LCM21 DANHI LCM22 LCF22 LCN21 LCN23 LHH22 LHM22 LHF22 LHN21 LHN23 LHP22