卧式塑料混色机

产品特点：

1.料桶及桨叶采用不锈钢材料制造，清洗容易、避免锈蚀； 2.料桶可倾斜100度，方便卸料； 3.连锁安全保护装置，确保操作者及机器设备的安全； 4.计时器可在0-30分钟之间选择混料时间。

塑料水管探测仪

塑料水管探测仪 型号:ZD2RD500货号:
内容简介： ZD2RD500塑料水管探测仪 ZD2RD500是探测塑料自来水管道最的设备，ZD2RD500塑料水管探测仪由发射机和手持式的接收机组成。发射机在消防栓、水表底座或水龙头上给塑料管道施加一个特殊的压力波信号，接收机的地震波传感器接收该信号，从而对塑料管道进行定位。 ■表头和声音信号指示 ■开机电池状况检测 ■便携式，重量轻 ■定位精度：埋深的5%（埋深2米时） 2.0 Fast Start Guide:Detailed operating instructions are also included on the side of the Receiver. These instructions are repeated her for your convenience:Transmitter Operating Instructions:1. Remove protective caps from transmitter2. Connect transmitter to nearest water outlet using kit supplied with transmitter3. Turn on waterloosen adjustment lock nut near T-handle4. Turn T-handle clockwise until water fl ows5. Turn T-handle counterclockwise until water pulses several times per second; tighten lock nutReceiver Operating Instructions:1. Turn ON/OFF knob clockwise to activate2. Initial meter reading indicates battery condition3. To replace battery, loosen battery release button, move housing upward to expose battery4. Begin initial tracing about 2 meters from transmitter or any other area where pipe location is known5. Push spike of receiver into ground near known pipe locationturn ON/OFF knob clockwise for mid-range meter readingadjust individual headphone controls for comfortable listening level6. To pinpoint pipe position, use receiver to probe ground until you fi nd peak maximum meter reading. You will also hear the pulsing sound similar to a heartbeat grow louder7. Trace the pipe by establishing the direction of pipe route by probing every one to two meters to locate a peak meter reading. Adjust the ON/OFF knob to maintain a mid-range meter readingNotesPrecautions:The ZD2RD500 is for use on water pipes only It works best on water pressures in the range of 3 to 7 Bars; maximum pressure 10 BarsThe Transmitter pulsating effect causes pipe movement. If used for extended periods or on substandard plumbing systems, leaks may resultAdditional NotesPrecautions:1. ZD2RD500 readings do not indicate depththe ZD2RD500 does not detect buried electrical power lines, gas lines or other hazardous underground objects, so always dig carefully in the proximity of buried pipes or cables2. Use caution while wearing headphonesbe alert to traffi c or other hazards that are normally heard outdoors3. Always stand clear of all transmitters, adapter kitshoses while they are connected to water systemsoperating4. On all hose bib applications, within 15 meters 50 feet of a building, the proper low-power transmitter GREENfaucet damper MUST MUST be used3.0 Transmitter Application Techniques:Transmitters are connected at sprinkler heads, hose bibs, water meter bases, fi re hydrantsclean-outs. Supplied transmitter adapter kits are illustrated in Section 5.0 of the OperationalManual. Always fl use any connection site until the water that fl ows is clear of all rust, silt, sealing compoundsforeign materials before connecting a transmitter to the water line.Refer to Section 5.0 for a detailed description of the receiver kitthe adapter kits that are available. All adapter kits are supplied with a 3-meter 10 foot high-pressure drain hose that must be connected to the outlet of the transmitter in order for the device to work properly.Always use a weight on the hose or tie the hose down to prevent the hose from whipping.Check the water pressure before attempting to locate the water linemake sure that it is in the operating range of the transmitter, which is 3 to 10 Bars 40 to 140 psi.4.0 Receiver Application Techniques:Two devices are provided for probing the surface with the ZD2RD500 receiver. A 14cm 5.5 inch ground spike is supplied for soft surfacesa brass hard surface plate is included for hard surfaces such as concrete or tarmac asphalt. The hard surface plate has concentric recessed channels in its surface that allow it to be positioned such that it lays fl at against surfaces.The ZD2RD500 is supplied with high quality headphones that have independent volume adjustments on each ear piece. Using non-standard headphones may reduce system performance; create oscillation in the audio outputcause mechanical damage to the headphone jack.Pinpointing pipe location is difficult without using the meter to measure signal level. It is very difficult for the average person to discern slight variations in audio signal levels. Always adjust the sensitivity so as to maintain a mid-scale meter reading while locating. Typical location accuracy is plus or minus one pipe diameter. Always probe or expose the pipe to confirm the exact location before performing any excavation.Best location results are obtained by beginning your tracing at least 3 meters 10 feet from the location where the transmitter is connected. The signal levels are normally too strong in the area immediately surrounding the transmitter. Alternately, tracing may begin at a known pipe location that is not more than 75 meters 250 feet down the pipe from the transmitter.The preferred method for tracing pipes is to locate at least two known pipe locations that indicate the heading or direction that the pipe is laid. Readings should be taken along an imaginary line that runs perpendicular to the pipeline. Confirm a peak signal reading by taking additional readings that are equal distances from the peak location. These readings should be lower than the peak readingapproximately equal.Once the pipe direction is determined, it is possible to quickly trace the pipe along this headingconfirm any changes in direction by periodically taking readings.Always transportstore your receiver in the carrying case to protect it from damage. If the receiver is allowed to fall overstrike a hard surface it may permanently damage the meter.5.0 ReceiverAdapter Kit Details:The receiver kit, sprinkler/hose bib kit, fire hydrant kitwater meter kit details are supplied for your reference in identifyingmaintaining the equipment.5.1 Receiver Kit Details:产品图片

　

   

PPR20-800立方米/时射流真空泵PPR喷射器(增强聚丙烯塑料型)

SLZ射流真空泵

SLZF玻璃钢射流真空泵

PPR增强聚丙稀射流真空泵

射流真空泵在国内是一种新型的低真空设备，在广泛的范围内可取代水环式和往复式真空泵。

射流真空泵是利用水的高速喷射产生负压来达到抽吸真空的目的。

射流真空泵的显著特点是：节油、节水、节电、工作、维修费用低，使用寿命长、安装方便、耐腐蚀、耐高温，在抽真空的同时又具有冷凝吸尘，吸收，排气，强化反应等作用，可做真空输送物料，真空蒸发，真空脱水，真空结晶，真空浓缩，真空过滤，真空干燥，化学吸收，真空除氧，供氧，也可用于环保吸尘，改变环境污杂和劳动条件。还可以抽吸有毒，有腐蚀性散颗粒状气体和易燃易爆气体和液体。

射流真空泵广泛应用于化工、制药、轻工、化纤造纸，塑料、橡胶、石油、环保、制砖、、精炼油、食品、冶金、纺织等行业，畅销国内二十多个省市。

特别是新开发的增强聚丙稀（PPR）真空泵具有钢铁的韧性和硬度，又具有玻璃钢的耐腐蚀性，且价位更低，应用范围更加广泛。

PPR塑料型射流真空泵及其配套设备的规格型号与性能参数
型号真空泵的性能参数配套水泵参数配用电机参数
极限真空度抽气量m3/h蒸发量升/时工作压力kg　流量m3/h扬程m功率KW转数r/min
Mpammhg
20-0.098-735281001.8　12.5201.52900
40-0.098-735452002.4　12.5352.22900
60-0.098-735723002.5　252032900
100-0.098-7351405002.8　253242900
200-0.098-7352608003　50325.52900
300-0.098-73536012003.6　45457.52900
400-0.098-73544016004.2　5050112900
500-0.098-73556020004.5　9045152900
600-0.098-73565025004.8　1005018.52900
700-0.098-73573030006　8570222900
800-0.098-73584035006.5　9375302900
　　　　　　　　　　

HQY-96塑料球压痕硬度仪

HQY-96 塑料球压痕硬度仪 一 产品名称： 塑料球压痕硬度计 二 产品型号： HQY-96

三 主要用途及功能：
　 1、塑料球压痕硬度仪是一款测定高分子材料抵抗另一种被视做没有弹性变形的刚性物体对它压入的能力。
 
     2、该机采用微处理器控制，具有数字化、集成化、等优点；是一种新型仪器，可自动加载，自动计时及数字位移检测，采用彩色液晶中文显示，自动打印等多种功能。
 
     3、该机还具有用￠1.8 mm压头，做24小时耐压试验的功能，适用于油田行业标准。是同类产品中性能价格比的仪器。
 
     4、该机符合GB/3398、  ISO2039 的标准要求，其主要参数满足DIN53-456标准要求。可对汽车用工程塑料及其它行业材料的硬度来进行测定。
 
     注：可根据用户要求配有英文操作方法
 
四 主要技术参数：
　 试验负荷： 9.8N（预加载） 49N   132N   358N   961N共五级
　 压头钢球直径：￠5 mm ￠10 mm  （￠1.8 mm选用
　 示值精度： ±1％
　 计时量程：10-100秒  球压痕试验，
                    30分钟—24小时（耐压试验适用于油田标准）
　 计时精度： ±1 %
　 机架变形量： ≤0.025 mm
    压痕深度指示最小分度值: 0.001 mm
　 深度测量范围： 0.15 mm-0.35 mm
　 试样允许最大高度： 30 mm
 
五 主要配置及附件：
　 主机一套
　 主机压头（￠5mm   ￠10mm选用）
                 （￠1.8mm 可根据具体客户需求选用）　
   微型打印机一台
   使用说明书一份
   标准硬度块一块
   计量检定证书一份
 
 
相关产品链接：
 
。HRZ-400 熔融指数仪          HQY-96 塑料球压痕硬度计               HWK-300 热变形维卡
。HJC-50KV 电压击穿           HDW-20KN电子万能试验机             HDS系列电子拉力试验机
。HMD-300 马丁耐热            HLH-20泡沫塑料落球回弹仪             HLC-300落锤冲击试验机
。HLB-30系列落镖冲击          HCJ系列摆锤冲击试验机                   HCJ液晶式冲击试验机
。HACJ-50安全帽冲击           HYW系列液压万能试验机                  HYX-1200泡沫压陷硬度仪
。HWN-15 万能制样机           HCY-12测厚仪                               HQK-I 缺口制样机
。HYL-II哑铃制样机            HCP-25冲片机                            HGC-500管材耐压爆破试验机

AFR-250/AF-200/AF-250/AF-200/AFR-200/AFR-100/150氟塑料铁氟龙高温线

1.高温线

1. AF-200/ AFP-200

2. AF-250/ AFP-250

3. AFR-200/ AFRP-200

4. AFR-250/ AFRP-250

5. AF-250A/ AFP-250A

6. AF/ AF-1/ AFP/ AFP-1

7. AFX 系列双色线

 

导体： 镀银/镀锡铜丝，单股或多股绞合

绝缘： FEP、PFA 或 ETFE铁氟龙

 

温度及电压范围：

130～150℃，600V

180～200℃，600V

230～260℃，600V

 

颜色： 具体颜色由客户指定

 

2屏蔽/护套高温电缆

1. AFF 氟塑料绝缘氟塑料护套安装电缆

2. KFF 氟塑料绝缘氟塑料护套控制电缆

3. AFP 氟塑料绝缘镀锡铜丝编织屏蔽电缆

4. AFB 氟塑料绝缘玻璃纤维编织防火电缆

5. AFPF氟塑料绝缘镀锡铜丝编织屏蔽 氟塑料护套电缆

6. AFBF氟塑料绝缘玻璃纤维编织 氟塑料护套防火电缆

7. AFG 氟塑料绝缘硅橡胶护套 软电缆

8. AFPG氟塑料绝缘镀锡铜丝编织 硅橡胶护套软电缆

 

03. GJB773A-2000 航空航天用军标电缆

1. FF4-3 系列镀镍铜芯聚四氟乙烯绝缘电线电缆

2. FF4-3Q 系列镀镍铜芯聚四氟乙烯绝缘轻型电线电缆

3. FF4-2 系列镀银铜芯聚四氟乙烯绝缘电线电缆

4. FF4-2Q 系列镀银铜芯聚四氟乙烯绝缘轻型电线电缆

5. FF46-1 系列镀锡铜芯聚全氟乙丙烯绝缘电线电缆

6. FF46-2 系列镀银铜芯聚全氟乙丙烯绝缘电线电缆

7. FF46-2Q 系列镀银铜芯聚全氟乙丙烯绝缘轻型电线电缆

 

04. 铁氟龙双层绝缘线/三层绝缘线

05. 300～1000℃高温线缆

06. 150～250℃铁氟龙高温线

07. 电动车专用八芯线

08.硅胶线、软高压线、高压电缆等

电线的工作温度：≤180℃

适用于交流额定电压500V\1140V\6000V\ 5kV\ 10kV\ 15kV\ 20kV\ 25kV\ 30kV

 

可为客户订做各种规格的高温线、铁氟龙氟塑料线

 

 

LZB-S型系列LZB-S型塑料管浮子流量计

LZB-S型塑料管玻璃转子流量计重量轻，耐腐蚀，不易破碎，无毒无味，使用方便，主要用于化工、轻工、医药、环保、食品等部门。

塑料光纤_Toslink, F05, SMI

塑料光纤_Toslink, F05, SMI

音响用塑料光纤

塑料光纤传输接收端子

Application Fiber core: Plastic Optical Fiber （ ?1.0mm ）

Optical Fiber Cable Outer Diameter: ?2.2mm; 4.0mm; 5.0mm; 6.0mm

Application Light Waver length: 655±30nm LED

Attenuation of Optical Fiber: Less Than 0.18dB/meter

Allowable Bending Radius: ≧25mm

Standard Patch cord Length: 100cm （+5/-0）

Plug Ferrule Ending: Hot Plate at the Tip

Connection Loss: ≦0.5dB

 

陶瓷插芯（Ferrule）/套筒（sleeve）,光纤连接器跳线尾纤,光纤适配器（法琅盘）,光纤转接接头（适配器）,光纤衰减器,光纤分歧器,波分复用器（WDM/CWDM/DWDM ）,光纤隔离器,光纤滤波器,光纤准直器,光纤环形器,光缆及终端设备,光缆接续（头）盒,光缆终端箱,光纤熔接机（电极棒）,光纤切割刀 （刀片）,光纤对接器（V型槽）,光源光功率计,光纤电话机,光时域测试仪（OTDRs）,光纤可视故障定位仪（光笔）,光纤回波损失测试仪,光开关,光纤收发器光电转换器,光纤研磨机组装工具,SMA905_高功率传输光纤连接器,塑料光纤_Toslink, F05, SMI 音响用塑料光纤,鍇裝軟光纖跳接線,感測光纖光纜,FTTH

PC-400塑料粉碎机

1.采用进口工具钢，特制刀具，特别耐用，刀具安装设计可伸缩调整，2.用钝后可多次更磨，反复多次使用，使用寿命特长。3.动刀座为梯级剪式装备设计，使切屑受力分解，造成切屑力成倍增长。4.动刀座材料为T7钢材材料，刚柔合理，不易破裂或磨损，采用高强度（8.8）钢螺丝紧固，结构坚实耐用。5.机主体为结构材料，使用不因破碎物料而影响机械性能。机主体轴心也与双端面由高精度座标镗依次加工完成，确保同心度及垂直度，每个零部件都设定基准孔，面进行粗，精两次流水加工工艺，部件互换性强精度高。6.装配重荷型轴承及于破碎室设置双层密封装置，动刀座与主轴采用热合装配，工艺，动刀配合间隙少于0.05MM，防止份碎粉末泄入轴承座内而加重电机负载，克服了破碎机的关键故障因素。粉碎机室前后部为双层隔音，中间填充隔音材料，噪声极低。7.分离设计，落料斗，粉碎机主体，过滤网底座均按基准孔装配，极易拆洗清料，设有清洗料室，调整刀具保护掣，确保清洗或调整时的安全。8.电机装置过荷保护装置，与电源连锁保护系统，保障安全。9.耗电省，节能，粉碎效果特佳，底坐装置滑轮，移动方便，体积精巧不占空间。

sjp-180型塑料造粒机

特点;1. 本机是分体/整体式煤｛气）电两用废旧塑料再生造粒机,2. 可挤出塑化造粒聚丙烯（PP）, 聚乙稀（pE）, 聚氯乙稀（PvC）, ABS, EpS等。3. 主机中配有排水, 排气装置, 可直接加工带水废旧塑料。4. 废旧编织袋不需拆线, 剪边, 可直接放入主机内生产。5. 主机配置有微电脑自动温控柜, 性能稳定, 操作简便。6. 能耗低, 节能, 吨耗电200元左右。7. 主. 付机镙杆, 镙筒采用碳素结构钢, 经特殊工艺处理, 高频淬火提高了镙杆, 镙筒的机械强度, 使用寿命是普通镙杆的2-3倍。8;本机配备电动机械模具。9. 金兴隆牌pS废旧泡沫塑料造粒机是我厂推出可生产XPS, EPS, PS多用途造粒机, 可生产泡沫料块状料及回头料等, 其性价比显著。   

             方式; 出口质量, 国内价格, 厂价直销, 机组配套, 免费考察, 免费培训, 免费提供产品销售信息及厂家, 指导生产, 保出产品, 根据客户需求免费上门安装调试, 代办运输。购买金兴隆塑机投资放心, 用户省心, 生意兴隆, 财源广进。

塑料瓶

Useful for media preparation and culture, especially when light is required. Ideal for storing or dispensing reagents or distilled water. Practical for use in cold rooms, even at subfreezing temperatures. Carboys are graduated in 1-gallon and 5-liter increments. Carboys without spigot are graduated to contain; carboys with spigot are graduated to deliver. Cap included. Cap size: 83B. Leakproof. Autoclavable.

 

  • 共2450条共245页
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54

    • 最新产品

    热门仪器： 液相色谱仪 气相色谱仪 原子荧光光谱仪 可见分光光度计 液质联用仪 压力试验机 酸度计（PH计） 离心机 高速离心机 冷冻离心机 生物显微镜 金相显微镜 标准物质 生物试剂