当前位置：阿仪网 > 深圳奥德赛创精密仪器有限公司 > 产品展示 > 英国RDP > 英国RDP显示仪表E725

英国RDP显示仪表E725

Name: 英国RDP显示仪表E725
SKU: E725

价格：￥电议

品牌名称：$brandModel.Title型号：E725 原产地：其它更新时间：2026/11/9 9:03:07

产品摘要：线性放大器
应变计传感器放大器
数字显示模块
限制旅行
串行输出
电压/ 4-20mA输出

支付方式：

支付宝微信银行转账

产品完善度：访问次数：793

产品分类

企业档案

会员类型：旗舰版

已获得阿仪网信誉等级评定

90成长值

(0 -40)基础信誉积累，可浏览访问

(41-90)良好信誉积累，可接洽商谈

(91+ )优质信誉积累，可持续信赖

阿仪网旗舰版会员：16年

工商认证【已认证】

最后认证时间：

注册号：**** 【已认证】

法人代表：【已认证】

参观次数：4471720

手机网站：http://wap.app17.com/c52724/

旗舰版网址：http://autoadsc.app17.com

详细内容

Signal conditioning is required where the output of a transducer needs to be boosted or changed into a form suitable for the monitor or logging device which will be used. Our digital display units have a built-in monitor device in the form of the digital display as well as analogue output.

The E725 amplifier unit additionally has a serial output ａnd limit trips with optional relays. Features such as auto-zero ａnd MAX, MIN ａnd TIR store are features which are also available with most versions of this unit.

A very wide range of gain adjustment ensures that our amplifiers are compatible with the vast majority of LVDT ａnd strain gauge sensors available from any manufacturer.

Supply voltage
	Supply voltage	Operating temperature range	Total weight
Ac supply version	115/230 ( +5/-15%), 50/60Hz, 7VA	-10癈 to 45癈	510g
Dc supply version	5V(+50%, -10%) /12/24V (+50%, -25%) dc 7W	-10癈 to 55癈	430g

Input Card Type
Input Card Type	AC	DC1	DC2	DC3
Compatible with	Any standard RDP LVDT (without integral electronics). Most LVDTs from any manufacturer.	Most full bridge strain gauge transducers DCTH, Sensagap & MCL Most amplified transducers from any manufacturer	Most 4-20mA transducers	D2 & LDC
Transducer excitation	1.1V rms , 5kHz 30mA	3V to 10V & ±15V, 100mA	23V, 100mA	6V, 100mA
Signal input range	15mV to 4V	3mV to 10V	3mV to 10V, 4-20mA	3mV to 10V
Electrical output bandwidth	0 to 250Hz	0 to 300Hz	0 to 300Hz	0 to 300Hz
Input impedance	100k Ohms	100M Ohms	100M Ohms	100M Ohms
Linearity error	±0.05% F.S.	±0.02% F.S.	±0.02% F.S.	±0.02% F.S.

Option card (none or one may be selected)
Option code	Description
2AC	Second input of type AC	Transducers must have sensitivity within 15% of each other ａnd display the same full scale value
2DC1	Second input of typeDC1
2DC2	Second input of type DC2
2DC3	Second input of type DC3
FM	Fast peak catcher card
R	Relay card (Mechanical)	Number of channels = 4	Operation time = 20ms	Contact rating = 150V dc/125V ac, 30W/60VA
FR	Relay card (Mechanical)	Number of channels = 2	Operation time = 5ms	Contact rating = 150V dc/125V ac, 30W/60VA
RS	Relay card (Solid-state)	Number of channels = 4	Operation time = 20ms	Contact rating = 200V dc/130V ac, 200mA
FRS	Relay card (Solid-state)	Number of channels = 2	Operation time = 5ms	Contact rating = 200V dc/130V ac, 200mA

Serial output
Standard = RS232
Optional = RS485

Analogue output (This unit has both Voltage ａnd 4-20mA outputs)
Input Card Type	F.S. (-)	0	F.S. (+)	Output ripple (peak-to-peak)	Approximate zero adjustment range
AC Standard	+10V/20mA	+5V/12mA	0V/4mA	5mV / 20uA (typical)	±1.5V
AC Special option 11	+10V/20mA	0v/4mA	-10V	5mV / 20uA (typical)
DC Standard	+10V/20mA	0V/4mA	-10V	2mV / 30uA (typical)
DC Special option 12	+10V/20mA	+5V/12mA	0v/4mA	2mV / 30uA (typical)

Limit trips (standard)
E725 TTL output	Number of channels = 4	Operation time = 15ms	Maximum source/sink current = 13mA

Other features
Description	DC1, DC2, DC3 & AC	2DC1, 2DC2, 2DC3 & 2AC	FM	R/RS	FR/FRS
3 modes may be programmed each with a different gain ａnd offset from the primary channel
A, B, (A+B)/2, A-B
Multi-point calibration, up to 11 calibration points to improve linearity

	PMHW	92mm
	PMHH	44mm
	PMBW	96.5mm
	PMBH	48.5mm
	PMD	124mm
	PMDC	174mm
	Panel cut-out	93mm X 45mm

Part number structure (example, E725-230-DC1-R-0-0)

E725

Supply voltage

Input Card Type

Option card (none or one may be selected)

Serial output

Special option

5	=5Vdc
12	=12Vdc
24	=24Vdc
105	=105Vac
115	=115Vac
230	=230Vac

AC	Any standard RDP LVDT (without integral electronics). Most LVDTs from any manufacturer.
DC1	Most full bridge strain gauge transducers DCTH, Sensagap & MCL Most amplified transducers from any manufacturer
DC2	Most 4-20mA transducers
DC3	D2 & LDC

0	=None
2AC	=Second input of type AC
2DC1	=Second input of type DC1
2DC2	=Second input of type DC2
2DC3	=Second input of type DC3
FM	=Fast peak catcher card
R	=Relay card (Mechanical), Number of channels = 4, Operation time = 20ms
FR	=Relay card (Mechanical), Number of channels = 2, Operation time = 5ms
RS	=Relay card (Solid-state), Number of channels = 4, Operation time = 20ms
FRS	=Relay card (Solid-state), Number of channels = 2, Operation time = 5ms

返回顶部

点击询价

联系方式

热门标签：E725显示仪表

已获得阿仪网信誉 等级评定

英国RDP显示仪表E725

企业档案

已获得阿仪网信誉 等级评定

联系我们

详细内容

相关文章

相关产品

快速导航

已获得阿仪网信誉等级评定

已获得阿仪网信誉等级评定