当前位置：阿仪网 > 深圳奥德赛创精密仪器有限公司 > 产品展示 > 以色列产品-新 > 以色列OPhir PE9电能量传感器

以色列OPhir PE9电能量传感器

价格：￥电议

品牌名称：$brandModel.Title型号：原产地：其它更新时间：2026/11/9 9:02:58

产品摘要：以色列OPhir PE9电能量传感器是Ophir热释电激光能量传感器采用创新的专利技术，能在范围广泛的条件下得到精确和可重复的测量，包括到高达 5ms 的长脉冲和高达 25KHz 的重复频率。
高能量热释电传感器 – 50μJ 到 40J，孔径最大 95mm
与上面的热释电传感器类似，但配备有散射片，因此能测量高能量和平均功率。

支付方式：

支付宝微信银行转账

产品完善度：访问次数：1590

产品分类

企业档案

会员类型：旗舰版

已获得阿仪网信誉等级评定

90成长值

(0 -40)基础信誉积累，可浏览访问

(41-90)良好信誉积累，可接洽商谈

(91+ )优质信誉积累，可持续信赖

阿仪网旗舰版会员：16年

工商认证【已认证】

最后认证时间：

注册号：**** 【已认证】

法人代表：【已认证】

参观次数：4472144

手机网站：http://wap.app17.com/c52724/

旗舰版网址：http://autoadsc.app17.com

详细内容

以色列OPhir PE9电能量传感器产品简介：

热释电能量传感器

热释电激光能量传感器 – 0.2µJ 到 10J
Ophir热释电激光能量传感器采用创新的专利技术，能在范围广泛的条件下得到精确和可重复的测量，包括到高达 5ms 的长脉冲和高达 25KHz 的重复频率。

高能量热释电传感器 – 50µJ 到 40J，孔径最大 95mm
与上面的热释电传感器类似，但配备有散射片，因此能测量高能量和平均功率。

公司介绍：

香港奥德赛创科技有限公司产品主要有安规检测类产品、环境类试验箱、万能试验机、疲劳试验机、燃烧阻燃类试验设备各类检测仪器，并代理了美国ED&D、日本KYOKUTOU极东、日本极东、日本志贺、日本爱模、日本TEAC、日本LINIAX、日本日本NMB、日本NoiseKen、美国MONROE、美国ELECTRO-LITE、以色列ophir、德国WAZAU、德国PTL、德国PTI、OPHIR等国际知名品牌检测仪器。

深圳市奥德赛创精密仪器有限公司的诚信、实力和产品质量获得业界的认可。欢迎各界朋友莅临参观、指导和业务洽谈。请联系销售总监：苏曼

以色列OPhir PE9电能量传感器产品图片：

以色列OPhir PE9电能量传感器参数规格：
Model PE9-C PE9-ES-C
Use Very Sensitive Most Sensitive
Aperture mm φ8 φ8
Absorber Type metallic metallic
Spectral Range µm (a) 0.15 - 12 0.15 - 12
Surface Reﬂectivity % approx. 50 50
Calibration Accuracy +/-% (a) 3 3
Max Pulse Width Setting (d) 1µs 2µs 20µs 1µs 2µs 20µs
Energy Scales 1mJ to 2µJ 1mJ to 2µJ 1mJ to 20µJ 200µJ to 200nJ 200µJ to 200nJ 200µJ to 2µJ
Lowest Measurable Energy µJ (b, c) 0.5 <0.2 0.5 0.1 <0.05 0.1
Max Pulse Width µs 1 2 20 1 2 20
Maximum Pulse Rate pps 25kHz 15kHz 10kHz 25kHz 15kHz 10kHz
Noise on Lowest Range µJ 0.04 0.05 0.1 0.01 0.01 0.02
Additional Error with Frequency % ±1% to 15kHz,
±6% to 25kHz
±1% to 15kHz ±1% to 10kHz ±1.5% to 25kHz ±1.5% to 15kHz ±1.5% to 10kHz
Damage Threshold J/cm2
<100ns 0.1 0.1
1µs 0.2 0.2
300µs 3 3
Linearity with Energy (b) ±1% ±1.5%
Maximum Average Power W 2 2
Maximum Average Power Density W/cm2 30 30
Fiber Adapters Available (see page 78) ST, FC, SMA, SC ST, FC, SMA, SC
Weight kg 0.25 0.25
Version
Part Number 7Z02933 7Z02949
Note: (a) Calibrated curve is checked ａnd adjusted at
the following wavelengths (µm)
For other wavelengths in the curve there is additional
calibration error as stated.
0.193, 0.355, 1.064, 1.48-1.6
240-800nm add ±4%, 2-3µm add ±8%, 10.6µm add ±15%.
0.355, 1.064, 1.48-1.6
240-800nm add ±4%, 2-3µm add ±8%, 10.6µm add ±15%.
<240nm not calibrated
Note: (b) For >7% (>10% for PE9-ES-C) of full scale, with the "user threshold" setting set to minimum. For other settings, the spec is for >7%/>10% of full scale or greater than twice the "user
threshold", whichever is greater.
The user threshold is available with Nova II, Vega, StarLite or Juno. For other meters, the threshold is set to minimum ａnd the linearity spec is >10% of full scale. The PE-C series will only operate
with Nova or Orion meters with an additional adapter Ophir P/N 7Z08272 (see page 79). The adapter can introduce up to 1% additional measurement error.
The user threshold feature allows adjustment of the internal threshold up to 25% of full scale if desired to avoid false triggering in noisy environments. The user threshold setting represents
the approximate minimum energy for pulse widths below ~50% of the pulse width setting. For longer pulse widths, the actual minimum may be higher. For highest accuracy, it is
recommended to zero the sensor against the meter the ﬁrst time it is used with a particular meter. For further information, see the FAQs on our Website.
Note: (c) A shock absorbing mounting post is available for situations in which sensor is mounted on a surface subject to shock or vibration. This can prevent false triggering ａnd allow working
at lower minimum energies (see accessory page 79 for mounting post).
Note: (d) With the Laserstar, Pulsar, USBI, Quasar ａnd Nova/Orion with adapter, only 2 out of 3 pulse widths settings are available; the 1µs (displayed as “10µs”) ａnd the 2µs (displayed as “20µs”).
1.2.2 Pyroelectric Energy Sensors
0.05µJ to 1mJ
F