当前位置: 阿仪网 > 医疗器械 > 电子仪器 > 其他 > 上海康世达医疗器械有限公司 > 产品展示 > 血液回收设备及耗材 > 厂家费森尤斯血液透析用水处理设备AquaBplus 500,AquaBplus 1000
厂家费森尤斯血液透析用水处理设备AquaBplus 500,AquaBplus 1000
企业档案
会员类型:旗舰版
已获得阿仪网信誉 等级评定
(0 -40)基础信誉积累,可浏览访问
(41-90)良好信誉积累,可接洽商谈
(91+ )优质信誉积累,可持续信赖
阿仪网旗舰版会员:1年
最后认证时间:
注册号: 【已认证】
法人代表: 【已认证】
参观次数:138621
手机网站:http://wap.app17.com/c174616/
旗舰版网址:http://ksdy.app17.com
详细内容
厂家费森尤斯血液透析用水处理设备AquaBplus 500,AquaBplus 1000
桂经理19117326863微xin同号
管理类别
第二类
型号规格
AquaBplus 500, AquaBplus 1000, AquaBplus 1500, AquaBplus 2000, AquaBplus 2500, AquaBplus 3000; AquaB LITE 500, AquaB LITE 1000, AquaB LITE 1500, AquaB LITE 2000, AquaB LITE 2500, AquaB LITE 3000,详见产品技术要求。
结构及组成/主要组成成分
该产品由级反渗透系统,包括 AquaBplus 系列型号、AquaB LITE 系 列型号;第二级反渗透系统,包括 AquaBplus B2 系列型号(选配)、B2 LITE 系列型号(选配);以及热消毒模块 AquaBplus HF 型号(选配)组 成。
该产品的 AquaBplus 系列型号、AquaB LITE 系列型号可独立构成单级反 渗透系统,也可分别与选配件 AquaBplus B2 系列型号、B2 LITE 系列型 号构成双级反渗透系统。AquaBplus HF 型号可与任意单级反渗透系统或 双级反渗透系统组合,提供热消毒功能。
其中级反渗透系统由操作面板、反渗膜、控制电路、泵、电磁阀、电 源模块组成;第二级反渗透系统由反渗膜、控制电路、泵、电磁阀、电源 模块组成;热消毒模块由控制电路、泵、电源模块、加热模块组成。
产品工作原理(Working Principle)
中文AquaBplus 500/1000 为费森尤斯旗下的单级 / 双级反渗透(RO) 血液透析用水处理设备。原水经预处理(砂滤、活性炭、软化)后,由高压泵加压进入反渗透膜组件;在压力驱动下,水分子穿透半透膜形成反渗水(透析用水),水中重金属、离子、有机物、细菌、内毒素等杂质被膜截留,随浓缩水排出。可选配双级 RO(B2 模块)进一步提升水质,或 HF 模块实现全自动热消毒(85℃以上),保障微生物安全。
英文AquaBplus 500/1000 are single/double-stage reverse osmosis (RO) hemodialysis water treatment systems by Fresenius Medical Care. Pre-treated feed water (sediment, carbon, softening) is pressurized by a high-pressure pump and passes through RO membranes. Under pressure, water molecules permeate the semi-permeable membrane to produce purified permeate (dialysis water), while heavy mmbedls, ions, organics, bacteria, endotoxins are rejected and drained as concentrate. An optional double-stage RO (B2 module) enhances purity, and an HF module enables fully automated heat disinfection (>85°C) for microbiological safety。
二、产品功能(Functions)
中文
水质纯化:高效去除水中无机离子、有机物、微生物、内毒素,产出符合 AAMI/ISO/ 中国药典的透析用水
双模式配置:单级 RO(基础)、双级 RO(B2,超高纯度)
自动消毒:化学消毒 / 热消毒(HF 选配),无死腔管路设计,抑制细菌滋生
安全监控:电导率、压力、流量、泄漏、余氯实时监测;启动 T1 自检、异常报警与断水保护
应急运行:故障时自动切换至应急模式,保障连续供水
远程监控:支持网络远程监测、数据记录、趋势分析与维护诊断
多机供水:500 型适配≤5 台透析机;1000 型适配 5~10 台
英文
Water Purification:Removes inorganic ions, organics, microbes, endotoxins; produces water meeting AAMI/ISO/Chinese Pharmacopoeia standards
Dual Configuration:Single-stage RO (standard) / double-stage RO (B2, ultra-high purity)
Auto Disinfection:Chemical / heat disinfection (HF optional); dead-space-free tubing to prevent biofilm
Safety Monitoring:Real-time conductivity, pressure, flow, leak, residual chlorine; startup T1 self-test, alarms, auto shut-off
Emergency Operation:Automatic switch to emergency mode on fault for uninterrupted supply
Remote Monitoring:Network remote access, data logging, trend analysis, diagnostics
Multi-Machine Supply:500: up to 5 dialysis machines; 1000: 5–10 machines
三、产品特点(Features)
中文
模块化设计:单级 / 双级 / 热消毒灵活组合,适配不同规模血透室
高水质保障:双级 RO 产水电阻率≥1MΩ・cm,内毒素<0.03EU/mL,细菌<0.1CFU/mL
安全冗余:双泵、双传感器、应急模式,关键部件冗余,降低停机风险
智能运维:自动冲洗、除钙、消毒;故障诊断、维护提醒、2 年预防性维护周期
合规便捷:符合 ISO 23500、YY0572,数据自动记录便于认证审核
人机友好:彩色触控屏、LED 状态灯、操作引导,维护流程简化
耐用可靠:封闭机柜防污,RO 膜寿命 2~3 年,十年技术验证
英文
Modular Design:Flexible single/double-stage/heat disinfection combinations for clinics
Superior Water Quality:Double-stage RO: resistivity ≥1MΩ·cm, endotoxin<0.03EU/mL, bacteria<0.1CFU/mL
Redundant Safety:Dual pumps/sensors, emergency mode; critical component redundancy
Smart Maintenance:Auto flush, decalcification, disinfection; fault diagnostics, 2-year PM interval
Regulatory Compliance:Meets ISO 23500, YY0572; automated data logging for audits
User-Friendly:Color touchscreen, LED indicators, guided operation; simplified maintenance
Durable & Reliable:Enclosed cabinet; RO membrane 2–3yr life; 10+ years field proven



四、技术参数(Technical Parameters)
表格
项目(Item) AquaBplus 500 AquaBplus 1000
产水量(Permeate Rate) 500L/h 1000L/h
适配透析机(Machines) ≤5 台 5~10 台
系统构型(Stage) 单级 RO;可选 B2 双级 单级 RO;可选 B2 双级
热消毒(Heat Disinfection) HF 模块选配 HF 模块选配
水回收率(Recovery) ≈75% ≈75%
产水电阻率(Resistivity) 单级:≥0.5MΩ・cm
双级:≥1.0MΩ・cm 单级:≥0.5MΩ・cm
双级:≥1.0MΩ・cm
内毒素(Endotoxin) <0.03EU/mL <0.03EU/mL
细菌总数(Bacteria) <0.1CFU/mL <0.1CFU/mL
工作压力(Operation) 0.8–1.6MPa 0.8–1.6MPa
电源(Power) AC220V/50Hz, 3kW AC380V/50Hz, 5kW
尺寸(H×W×D) 约 180×60×80cm 约 180×60×80cm(单级)
重量(Weight) 约 180kg 约 220kg
五、使用方法(Operation)
中文
开机:接通水电→启动主机→系统自动 T1 自检(传感器、泵、阀、泄漏)→自检通过进入待机
运行:进入 “生产” 模式→原水经预处理→高压泵→RO 膜→产水输送至透析机管网
监控:实时查看电导率、流量、压力、水质曲线;异常自动声光报警并断水
消毒:定期(热消毒每日 / 化学每周)执行 “消毒程序”→自动冲洗→加热 / 加药→浸泡→冲洗→检测无残留
维护:按提示更换滤芯(3~6 月)、RO 膜(2~3 年);自动除钙、润滑、校准
关机:待机下执行 “关机”→自动冲洗管路→断电;长期停用需排空、密封、定期保养
英文
Startup:Connect power/water → power on → auto T1 self-test (sensors, pumps, valves, leaks) → ready
Operation:Enter “Produce” → pre-treatment → high-pressure pump → RO membrane → permeate to dialysis loop
Monitoring:View conductivity, flow, pressure, trends; alarms & auto shut-off on fault
Disinfection:Run “Disinfect” (daily heat/weekly chemical) → flush → heat/dose → hold → thorough rinse → residual test
Maintenance:Replace filters (3–6mo), membranes (2–3yr); auto decalcification, lubrication, calibration
Shutdown:Standby → “Shutdown” → auto flush → power off; drain & seal for long-term storage
六、适应症(Indications)
中文
为血液透析(HD)、血液滤过(HF)、血液透析滤过(HDF)、CRRT等治疗提供合格反渗水
适用于医院血透中心、独立透析中心,为多台透析设备集中供水
满足急性肾损伤、慢性肾衰竭、药物 / 毒物中毒、严重水电解质紊乱等需透析治疗的患者用水需求
英文
Supply purified water for hemodialysis (HD), hemofiltration (HF), hemodiafiltration (HDF), CRRT
For hospital/independent dialysis centers, centralized supply to multiple machines
For patients with acute kidney injury, chronic renal failure, drug/poison intoxication, severe electrolyte imbalance requiring dialysis
七、禁忌症(Contraindications)
中文
严禁用于非透析医疗用途(如静脉输液、饮用)
进水不符合市政饮用水标准(硬度、余氯、微生物超标)时禁止使用
设备故障、报警未排除、消毒未完成、水质不合格时严禁供水
未培训人员、无维护条件、无应急预案的机构禁止使用
英文
Prohibited for non-dialysis use (IV infusion, drinking)
Do not use if feed water fails municipal drinking standards (hardness, residual chlorine, microbes)
No supply when faulty, unacknowledged alarm, incomplete disinfection, poor water quality
Forbidden for untrained staff, facilities without maintenance/emergency plans
八、注意事项(Precautions)
中文
必须配套合格预处理系统(砂滤、活性炭、软化器),定期更换耗材
每日检测硬度、余氯、电导率;每月测细菌、内毒素,合格方可使用
消毒时挂警示牌,防烫伤;化学消毒后充分冲洗并测残留
严禁关闭主机电源(需保持自动冲洗);长期停用每月开机维护
维护、维修必须断电断水;泄漏立即停机检修
数据保存≥5 年,用于合规与追溯
仅专业工程师安装、调试、维修
英文
Mandatory pre-treatment (sediment, carbon, softener); replace consumables on schedule
Daily tests: hardness, residual chlorine, conductivity; monthly bacteria/endotoxin; use only if 合格
Post warning signs during disinfection (burn hazard); rinse thoroughly after chemical disinfection
Never turn off main power (auto-flush required); monthly service for long-term storage
Isolate power/water for service; shut down immediately on leak
Data retention ≥5 years for compliance & traceability
Installation/service only by qualified engineers
九、存储条件(Storage)
中文
环境:室内、干燥、通风、无尘;温度 5~35℃,湿度≤80%(无冷凝)
防护:避免阳光直射、震动、腐蚀气体、液体溅落;封闭机柜保护
短期(≤1 个月):保持待机,自动冲洗;每月至少运行 1 次
长期(>1 个月):排空管路、膜壳、泵内积水;密封接口;防潮防尘;每 3 个月试运行、消毒
运输存储:原包装、固定部件;防潮防震;温度 - 10~40℃
英文
Environment:Indoor, dry, ventilated, dust-free; 5–35°C, RH≤80% (no condensation)
Protection:Avoid direct sun, vibration, corrosive gases, splashes; enclosed cabinet
Short-term (≤1 month):Keep standby, auto-flush; run at least monthly
Long-term (>1 month):Drain all water from lines, vessels, pumps; seal ports; dry storage; test-run & disinfect quarterly
Shipping/Storage:Original packaging, secure components; moisture/shock protection; -10–40°C
十、说明书核心信息(Manual Core)
中文
分类:二类医疗器械,国械注进 20182101897
用途:反渗透水处理,为血液透析设备提供纯化水
组件:控制系统、高压泵、RO 膜、阀组、传感器、泄漏监测、消毒模块
安全:双重监测、冗余设计、应急模式、报警联锁、无死腔管路
维护:自动程序 + 定期耗材更换;2 年预防性维护
合规:ISO 23500、YY0572、AAMI 标准
责任:厂商负责质量;用户负责合规使用、维护、培训
英文
Classification:Class II medical device, China Registration No. 20182101897
Intended Use:Reverse osmosis system to produce purified water for hemodialysis machines
Components:Controller, high-pressure pump, RO membranes, valves, sensors, leak detection, disinfection module
Safety:Dual monitoring, redundancy, emergency mode, interlocks, dead-space-free fluid path
Maintenance:Auto programs + scheduled consumable replacement; 2-year PM cycle
Compliance:ISO 23500, YY0572, AAMI standards
Responsibility:Manufacturer: quality; User: proper use, maintenance, staff training
Shanghai Kangshida Medical Devices Co., Ltd. is a professional company engaged in the sales of medical devices, focusing on the agency and distribution of renowned medical equipment brands from both domestic and international markets. Its core product range covers full-scenario medical devices for physical examination, diagnosis, emergency treatment, laboratory testing, ultrasound, medical analysis, life sciences, disinfection and sterilization, rehabilitation therapy, operating rooms, emergency rooms, consulting rooms and other fields. Relying on its strong product sales capacity, excellent commercial reputation and integrity-based operation philosophy, the company has won unanimous recognition and trust from medical institutions and partners.
The steady and rapid development of the company is attributed to its carefully selected high-quality product portfolio. It always takes customer needs as the core orientation and is committed to creating long-term value and practical benefits for customers. As an authorized and exclusive agent for many well-known domestic and international manufacturers, the company has established a complete supply system of medical devices with reliable quality, fully meeting the needs of clinical diagnosis and treatment.
The company always takes improving customer satisfaction as its core goal. To strictly adhere to product standards and exceed the expectations of customers and manufacturers, it regularly provides training on professional ethics and professional business skills, forging a highly competent, efficient and executive team covering business, technology and management. The team implements a 7×24-hour all-weather response mechanism to provide professional and high-quality after-sales service and technical support, efficiently solving various equipment operation and maintenance problems. At the same time, the company offers exclusive services including same-day delivery and free distribution, forming a closed loop covering supply, distribution and after-sales service to fully ensure the stable supply and worry-free use of medical equipment for medical institutions.
Upholding integrity as the foundation of its business, the company selects high-quality medical devices and provides professional services for customers, helping to upgrade the quality of medical services and contributing to the high-quality development of China's medical industry.
Intellectual Property Infringement Complaint: Kangshida Medical does not manufacture medical products; all products are sourced from original manufacturers. We will promptly address any intellectual property infringement issues.The content published herein is for reference only.
热门标签:厂家费森尤斯血液透析用水处理设备AquaBplus,500AquaBplus,1000,费森尤斯血液透析用水处理设备,费森尤斯血液透析用水处理













