当前位置： 阿仪网 > 上海非利加实业有限公司 > 产品展示 > 实验室常用设备 > 泵 > FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FFPUDVS2008A
FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_F
价格：￥ 电议
品牌名称：$brandModel.Title型号：FPUDVS2008A 原产地：中国大陆 更新时间：2026/10/28 12:21:15
支付方式：
- 支付宝 微信 银行转账
产品完善度： 访问次数：638
企业档案
会员类型：旗舰版
已获得阿仪网信誉 等级评定
(0 -40)基础信誉积累，可浏览访问
(41-90)良好信誉积累，可接洽商谈
(91+ )优质信誉积累，可持续信赖
阿仪网旗舰版会员：7年
工商认证 【已认证】
最后认证时间：
注册号： 【已认证】
法人代表： 【已认证】
参观次数：5210639
手机网站：http://wap.app17.com/c157784/
旗舰版网址：http://www.shflj021.com
详细内容
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_F
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
cfpudvs2000a系列将接受三种不同类型的外部输入信号中的任*何种：4至20 mA、0至10 Vdc或频率。4至20 mA和0至10 Vdc回路必须通电。可接受两种类型的频率输入，交流正弦波（磁线圈类型输出）和数字方波（霍尔效应信号、触点闭合）。电路板上的跳线插头在出厂时为交流正弦波信号预设，使用数字方波信号时必须重新定位跳线。所有接线都应在位于FPUDVS2000A系列侧面的接线盒内进行。提供了个液体密封接头，应用于外部信号电缆。信号输入线按所用信号类型进行颜色编码。
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
大工作压力：100磅/平方英寸/6.9巴（大多数型号）
高流体温度：54°C（130°F）
环境温度范围：-10至43°C（14至110°F）
外壳：NEMA 3R（IP24）（室内使用可接受）
泵管材料：Norprene?
工作循环：连续
大固体：体积的50%
大粘度：5000厘泊
大吸力：高达9 m（30’）的水
调低比例：20:1
功率要求：115伏60赫兹80瓦，220伏50赫兹40瓦，230伏60赫兹45瓦
变速：115伏60赫兹40瓦，220伏50赫兹40瓦，230伏60赫兹40瓦
尺寸：155.6高x 257.2宽x 228.6毫米深（6_x 10_x 9英寸）
变速：159 H x 254 W x 235 mm D（6?x 10 x 9?“）
重量：3.6千克（8磅）
管接头：压缩倒钩式（内直径×外直径）
FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_FPUDVS2012A蠕动泵OMEGA欧米茄
Peristaltic Pump Tube Does Not Require Valves
Self Priming
High Outlet Pressure Capability of 100 psig on Most Models
Improved Pump Head Design
Corrosion Proof Polybutylene Terephthalate Housing
Tamper Resistant Electronic Control Panel Cover
Tube Failure Detection
Fixed-Timer Control
The FPU2000A Series fixed pumps feed by an analog fixed 60 second timer. The pump can be on for 1 to 60 seconds. All FPU2000A Series have fixed speed outputs ａnd can be adjusted by selecting the pumphead tube size ａnd choosing the desired RPM (revolutions per minute).
Standard Percentage & Digital Percentage Controllers
The FPUVS2000A ａnd FPUDVS2000A Series variable speed pumps are for continuous pumping relatively pulse free, even while adjusting the percentage of output. The variable speed pump requires the use of brushes on the DC motor. Excellent brush life expectancy (2000 hours). An extra set of brushes included with every pump.
The FPUDVS2000A Series will accept any one of three different types of external input signals; 4 to 20 mA, 0 to 10 Vdc, or frequency. The 4 to 20 mA ａnd 0 to 10 Vdc loops must be powered. Two types of frequency inputs, AC sine waves (magnetic coils type outputs) ａnd digital square waves (Hall Effect signals, contact closures), are acceptable. A jumper plug located on the circuit board is factory pre-set for AC sine wave signals, the jumper must be re-positioned when digital square wave signals are being used. All wiring connections are to be made inside of the junction box located on the side of the FPUDVS2000A Series. A liquid tight connector is supplied ａnd should be used for the external signal cable. The signal input wires are color coded to the type of signal being used.
SPECIFICATIONS
Maximum Working Pressure: 100 psig/6.9 bar (most models)
Maximum Fluid Temperature: 54°C (130°F)
Ambient Temperature Range: -10 to 43°C (14 to 110°F)
Enclosure: NEMA 3R (IP24) (acceptable for indoor use)
Pump Tube Material: Norprene?
Duty Cycle: Continuous
Maximum Solids: 50% by volume
Maximum Viscosity: 5000 Centipoise
Maximum Suction Lift: Up to 9 m (30＇) water
Turn Down Ratio: 20:1
Power Requirements: 115 V 60 Hz 80 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 45 Watts
Variable Speed: 115 V 60 Hz 40 Watts, 220 V 50 Hz 40 Watts, 230 V 60 Hz 40 Watts
Dimensions: 155.6 H x 257.2 W x 228.6 mm D (6? x 10? x 9")
Variable Speed: 159 H x 254 W x 235 mm D (6? x 10 x 9?")
Weight: 3.6 kg (8 lb)
Tube Connection: Compression barb type (?” ID x ?" OD)
热门标签：FPUDVS2008A_FPUDVS2009A_FPUDVS2010A_FPUDVS2011A_F
相关文章
相关产品
-
-
电议
-
电议
-
-
