当前位置：阿仪网 > 光学仪器 > 光学仪表 > 其他 > 上海屹持光电技术有限公司 > 产品展示 > 光学元器件 > 光谱和测试类镜片 > 用于深紫外成像的元件Components for DUV-photolithography

用于深紫外成像的元件

价格：￥电议

品牌名称：$brandModel.Title型号：Components for DUV-photolithography 原产地：中国大陆更新时间：2026/9/21 7:50:14

产品摘要：DUV-photolithography，深紫外照相

支付方式：

支付宝微信银行转账

产品完善度：访问次数：590

产品分类

企业档案

会员类型：标准版

已获得阿仪网信誉等级评定

10成长值

(0 -40)基础信誉积累，可浏览访问

(41-90)良好信誉积累，可接洽商谈

(91+ )优质信誉积累，可持续信赖

阿仪网标准版会员：4年

工商认证【已认证】

最后认证时间：

注册号：【已认证】

法人代表：【已认证】

参观次数：326524

手机网站：http://wap.app17.com/c148240/

公司网站：http://www.eachwave.com

详细内容

Components for DUV-photolithography

资料下载：Download Components for DUV-photolithography Datasheet (PDF, 388 KB)

One of the essential requirements of modern optoelectronics consists in miniaturization of equipment ａnd devices as well as the components they include. It dictates the necessity of utilization of DUV lasers as the key tools of advanced photolithographic technology. This type of lasers have shortest (among others laser sources) wavelength of powerful monochromatic radiation. It allows generating nano-scale structures ａnd thus creating systems characterized by the maximal spatial resolution as well as by packing density.

Modern projection steppers ａnd scanners on the base of KrF excimer lasers (248 nm) are currently used to produce lines in the 110 nm range. Lines as thin as 65 nm are being resolved by systems utilizing ArF excimer lasers emitting light with a wavelength of 193 nm. Further resolution enhancement ａnd improvement of the systems became possible using immersion lithography. In this case laser radiation is focused not on dry substrate but on the one moistened by special immersion liquid. This liquid is typically ultra-pure, deionized water continually circulated to eliminate thermally-induced distortions. Such approach has allowed increasing the numerical aperture by more than 30% ａnd as a result it enables the economical volume production of microchips featuring 45 nm structures.

Utilization of synthetic crystal quartz for the purposes DUV-photolithography is caused by its excellent transmission in UV range, high crystallographic perfection ａnd optical homogeneity, chemical resistance ａnd stability to intensive laser radiation.

For production of optical components described in this chapter Tydex uses synthetic crystal quartz of precision optical grade (class A1, category “extra”).

Main parameters of the used material are as follow:

Parameter	Value
Twinnings, striaes, microbubbles including their conglomerates; inclusions ａnd cracks	not allowed
Polarization uniformity	no visible variations during inspection between crossed polarizers
Homogeneity of refractive index	Δ n < 3 x 10^-6 (TWD <= λ /10 per inch of crystal length)
Etch channels, cm^-2	<= 30, typically
Absorption coefficient, cm^-1 (λ=193 nm)	<= 0.025
Birefringence, nm/cm	<= 10
Concentration of main impurities, ppm	<= 10

High level of growth technology which is currently used to produce synthetic crystal quartz does ensure that these parameters will be obtained. But high-involved responsibility induced by application dictates a mandatory requirement to check material quality additionally. Moreover any small piece of used material must be tested without exceptions ａnd with double attention to any details. For this purpose prior to passing an ingot to production we cut ａnd prepare a sample of required overall dimensions ａnd then get it polished. After that we accurately test it under UV excitation using ArF excimer laser. Each ingot (i.e. the sample) even being grown at the same growth run must pass this test successfully. A dose ａnd duration of the excitation simulate the further working conditions of finished optical components ａnd are specially selected to make an attempt to discover material imperfections, mainly the impurities. Only the material withstanding the applied exposure ａnd that is the most important thing – do not get UV-induced degradation of transmission, is passed to production. Otherwise or in case if any single parameter does not meet the above mentioned value, the material is unambiguously rejected ａnd it is ensured that it will be never used for the purposes of discussed application.

For DUV-photolithography Tydex supplies the following components:

circular plano-plano thin plates (wafers);
sector-shape plano-plano plates (sectors);
wedge plates of complex design (depolarizers).

Severe application＇ conditions where the components are used dictate the exclusive requirements to parameters of their treatment. Typical specification is as follows:

Parameter	Value
Orientation tolerance, arc. min.	+/- 10
Surface quality, scr/dig	High-quality polishing, better than 20/10
Surface roughness at any square of 350 μm x 260 μm (RMS), nm	< 0.6
TWD ( λ= 633 nm), λ	< 1
Thickness of an element, mm: - wafer - sector - depolarizer (thin edge)	0.55575 1.9456 0.9
Tolerance zone for overall dimensions (excluding thickness), mm	+/-0.05
Tolerance zone for thickness (typical value), μm	+0.5/-2 (+/-0.5 – state-of-the-art)
Non-parallelism of opposite surfaces (for plano-plano elements), arc. sec.	< 2
Tolerance zone for wedge (for wedged elements), arc. min.	+/- 25

Together with each component we supply a certificate of conformance as well as an individual interferometer graph demonstrating surface errors.

The examples of ZYGO interferograms (TWD) are shown at figures 1-3.

Fig. 1 Typical ZYGO interferograms (TWD) of D100 mm wafer.

Fig. 2 Typical ZYGO interferograms (TWD) of sector.

Fig. 3 Typical ZYGO interferograms (TWD) of depolarizer.

Besides the components mentioned above ａnd upon your specification & design we will be glad to produce other custom-made components.

返回顶部

点击询价

联系方式

热门标签：DUV-photolithography,深紫外照相

已获得阿仪网信誉等级评定

用于深紫外成像的元件

太赫兹设备

太赫兹器件

飞秒激光器

皮秒激光器

传统激光器

激光调制与测量

超快调制与测量

光谱影像

光纤通信与传感

光学元器件

镀膜与加工

X射线

磁克尔综合测试平台

半导体参数分析仪

光纤飞秒激光器

企业档案

已获得阿仪网信誉等级评定

联系我们

详细内容

Components for DUV-photolithography

相关文章

相关产品

快速导航

已获得阿仪网信誉 等级评定

用于深紫外成像的元件

企业档案

已获得阿仪网信誉 等级评定

联系我们

详细内容

Components for DUV-photolithography

相关文章

相关产品

快速导航

已获得阿仪网信誉等级评定

已获得阿仪网信誉等级评定