耶拿Analytik Jena 锌Zn空心阴极灯 480-450.067
http://www.app17.com/c133995/products/d7532299.html
耶拿Analytik Jena 锌Zn空心阴极灯 480-450.067

供应德国耶拿原子吸收光谱仪用空心阴极灯原装正品。

北京谱飞科技有限公司专业供应德国耶拿Analytik Jena原装空心阴极灯/石墨管/雾化器/样品杯等耗材配件，常用耗材配件现货供应，订货快，货期短，到货快，原装正品，质量保证。

德国耶拿空心阴极灯采用了高标准精心制造，由德国耶拿精心打造，每一支灯具都经过严格的测试，确保可满足***严苛的要求。所有空心阴极灯都经过严格测试，以确保光输出、高强度、高稳定性和光谱纯度标准。

空心阴极灯使用常识

1 空心阴极灯出厂前通常厂家要进行老化（出厂前持续点亮数十小时，以使灯的性能达到），若用户发现购买的新灯的性能差别较大，需要在用户现场进行一段时间的老化后，再对灯的性能进行判断。

2正常使用过程中若进行电流调节，应缓慢进行，骤然将灯电流升高可能导致阴极表面发生喷射，影响灯的使用寿命，严重时还会使阴极破坏。

3 空心阴极灯如长期搁置不用，将会因漏气、气体吸附等原因而不能正常使用，甚至不能点亮。因此，建议每隔3个月将不常用的灯通电点亮2—3小时，以保持灯的性能并延长其使用寿命。

4 使用空心阴极灯，尤其是低熔点元素（如As、Se等）时，应避免有较大的振动，用毕不能立即更换其他灯，需要冷却后再换。

5 取放或装卸空心阴极灯时，应拿灯座，不要拿灯管，更不要碰灯的石英窗口，以防止灯管破裂或窗口被沾污，异致光能量下降。

6 空心阴极灯一旦打碎，阴极物质暴露在外面为了防止阴极材料上的某些有害元素影响人体健康，应按规定对有害材料进行处理，切勿随便乱扔。

更多耶拿analytik-jena空心阴极灯产品货型号，请参照以下信息：

元素 耶拿Analytik Jena货号Aluminum (Al) 480-450.001

Antimony (Sb) 480-450.002

Arsenic (As) 480-450.003

Barium (Ba) 480-450.004

Beryllium (Be) 480-450.005

Bismuth (Bi) 480-450.006

Boron (B) 480-450.007

Cadmium (Cd) 480-450.008

Calcium (Ca) 480-450.009

Cesium (Cs) 480-450.010

Cerium (Ce) 480-450.011

Chromium (Cr) 480-450.012

Cobalt (Co) 480-450.013

Copper (Cu) 480-450.014

Dysprosium (Dy) 480-450.015

Erbium (Er) 480-450.016

Europium (Eu) 480-450.017

Gadolinium (Gd) 480-450.018

Gallium (Ga) 480-450.019

Germanium (Ge) 480-450.020

Gold (Au) 480-450.021

Hafnium (Hf) 480-450.022

Holmium (Ho) 480-450.023

Indium (In) 480-450.024

Iridium (Ir) 480-450.025

Iron (Fe) 480-450.026

Lanthanum (La) 480-450.027

Lead (Pb) 480-450.028

Lithium (Li) 480-450.029

Lutetium (Lu) 480-450.030

Magnesium (Mg) 480-450.031

Manganese (Mn) 480-450.032

Mercury (Hg) 480-450.033

Molybdenum (Mo) 480-450.034

Neodymium (Nd) 480-450.035

Nickel (Ni) 480-450.036

Niobium (Nb) 480-450.037

Osmium (Os) 480-450.038

Palladium (Pd) 480-450.039

Phosphorus (P) 　

Platinum (Pt) 480-450.040

Potassium (K) 480-450.041

Praseodymium (Pr) 480-450.042

Rhenium (Re) 480-450.043

Rhodium (Rh) 480-450.044

Rubidium (Rb) 480-450.045

Ruthenium (Ru) 480-450.046

Samarium (Sm) 480-450.047

Scandium (Sc) 480-450.048

Selenium (Se) 480-450.049

Silicon (Si) 480-450.050

Silver (Ag) 480-450.051

Sodium (Na) 480-450.052

Strontium (Sr) 480-450.053

Tantalum (Ta) 480-450.054

Tellurium (Te) 480-450.055

Terbium (Tb) 480-450.056

Thallium (TI) 480-450.057

Thorium (Th) 480-450.058

Thulium (Tm) 480-450.059

Tin (Sn) 480-450.060

Titanium (Ti) 480-450.061

Tungsten (W) 480-450.062

Uranium (U) 480-450.063

Vanadium (V) 480-450.064

Ytterbium (Yb) 480-450.065

Yttrium (Y) 480-450.066

Zinc (Zn) 480-450.067

Zirconium (Zr) 480-450.068

CONSUMABLES AAS/AFS | 2013

Analytik Jena AG | Konrad-Zuse-Str. 1 | 07745 Jena/ Germany | www.analytik-jena.com | info@analytik-jena.com

AFS

mercur

AAS I HR-CS AAS

novAA? series

ZEEnit P series

contrAA? series

Catalogue CONSUMABLES

Atomic Absorption Spectrometry

Please choose your Consumables list.

analytikjena

Consumables

AAS

1 / 60

Order number Description

GRAPHITE TECHNIQUE

Graphite material / furnace spare parts

[ vario 6 ; novAA 400 ; contrAA 700 ; contrAA 600]

407-A81.018 2 Pair graphite electrode (4 pieces)

407-A81.024 Graphite shroud, pyro-coated

407-A81.011 Pack of 10 pieces graphite tube, coated

407-A81.025 Pack of 10 pieces graphite tube with PIN-platform

2 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-A81.020 Pack of 5 pieces Graphite pipetting insert

solid sampling

[ vario 6 ; novAA 400 ; contrAA 700 ]

702-A81.391 IC-graphite shroud solid (necessary for solid sampling), pyro-coated

702-A81.392 Graphite sealing cap for the furnace in the solid analysis 1 pieces

702-A81.314 Adjustment aid (external) novAA, contrAA

702-A81.394 Adjusting aid (internal) novAA, contrAA

3 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-152.023 Pack of 10 pieces Z-graphite sample platform (solid), pyro-coated

407-A81.303 Pack of 10 pieces solid graphite tube, pyro-coated

407-A81.320 Spectral graphite powder, 25 g

Replacement parts furnace

407-A81.021 Bag with 2 pieces O-rings for the furnace, ceramic

702-A81.045 Adjusting insert

407-142.312 Furnace windows contrAA 700, 1 pair

from SN: 161K0335

4 / 60

Consumables AAS

Analytik Jena AG

Order number Description

702-A81.002 Furnace windows, 1 pair (novAA 400, vario6)

407-10-1610-679-14 Sample compartment windows contrAA 300/600, 1 pair

407-150.598 Sample compartment windows contrAA 700, 1 pair

702-A81.234 Screwed gas fittings, 1 x long

702-A81.233 Screwed gas fittings, 2 x short

Graphite material ZEEnit

Graphite material [ ZEEnit 600/650/700 ] ａnd all upgraded systems ZEEnit 600s/650s

all tubes are pyrolytically coated

5 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-152.342 Pair of Z-electrodes (1x above, 1x below)

407-152.314 Pack of 10 pieces Z-graphite tube with PIN-platform, long

407-152.315 Pack of 10 pieces Z-standard graphite tube

407-152.346 Pack of 5 pieces Z-graphite insert

407-152.324 Set of graphite parts furnace

Set 1 ZL-graphite shroud, 2 electrodes ａnd 1 pipetting insert

6 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-152.340 Z-graphite shroud liquid

solid sampling

407-152.540 Adjusting aid (external), solid, ZEEnit

407-152.599 Adjustment aid (internal), solid, ZEEnit

407-152.023 Pack of 10 pieces Z-graphite sample platform (solid), pyro-coated

407-152.316 Pack of 10 pieces Z-standard graphite tube, solid

7 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-152.307 Pack of 5 pieces Z-graphite sealing cap (solid)

407-A81.320 Spectral graphite powder, 25 g

407-152.341 Z-graphite shroud, solid

Replacement parts graphite furnace ZEEnit

[ ZEEnit 600 ; 650 ; 700 ; 650P ; 700P und 600 S ; 650S ]

407-152.020 Bag with 3 pieces seal rings 11.6 mm x 1.2 mm for the furnace

407-152.541 Adjusting aid (external), liquid, ZEEnit

407-152.022 Furnace windows, 1 pair (left, right) (ZEEnit 60/65)

8 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-152.576 Furnace windows, 1 pair (ZEEnit 600/650/700)

Replacements for graphite autosampler MPE

MPE 60 [ novAA 400; ZEEnit ]

for serial number in format XX.XX.XX

407-230.069 Dosing unit 500 μl

407-401.590 Dosing tube MPE (MFA)

9 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-230.067 Wide neck bottle 750 ml

407-230.073 Pack of 10 pieces PP-sample cup, 5 ml

407-218.852 Polystyrene-sample cup 1,5 ml; 1,000 pieces

407-230.075 Pack of 10 pieces PTFE- sample cup, 2 ml

10 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-230.072 Pack of 10 pieces PTFE-special cup, 5 ml

407-230.078 Set tubing guide (Ti cannula with PTFE tubing ａnd PEEK tube)

MPE 60 [ novAA 400 ; ZEEnit ; contrAA 700 ]

for serial number in format XXX.XXX ａnd XXXXXXXXXX

407-402.597 Inlet tube PTFE (bottle-valve)

407-403.158 Dosing unit 500 μl

from S/N 703.801 (March 2007)

11 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-230.069 Dosing unit 500 μl

407-401.590 Dosing tube MPE (MFA)

407-230.073 Pack of 10 pieces PP-sample cup, 5 ml

407-218.852 Polystyrene-sample cup 1,5 ml; 1,000 pieces

12 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-402.595 Sample tray standard / 89 Positions

407-230.075 Pack of 10 pieces PTFE- sample cup, 2 ml

407-230.072 Pack of 10 pieces PTFE-special cup, 5 ml

407-402.593 Tubing guide for dosing tubing

407-402.594 Tube fixing for autosampler arm

407-402.596 Sample tray cover

13 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-233.912 Wide neck bottle 1,000 ml (with cap)

Furnace Tools

Furnace Tools - Sets

407-A60.066 Tool kit novAA400 / contrAA 700 /contrAA 600 / vario 6

consisting of:

- Key 7-40

- Reducing die for electrode

- Reducing die for shroud

- Spindle

14 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-152.300 Tool kit ZEEnit 600/650/700

consisting of:

- Screw extractor

- Reducing die tool

- Adjustment tool

- Adjusting insert

Replacements Tools ZEEnit

407-400.409 Mechanic＇s mirror

407-401.404 Tweezers (titanium)

407-401.045 Screwdriver 5.5 x 1.0

15 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-401.036 Key 7-40

(ZEEnit 600/650/700/650P/700P)

407-401.039 Change-over ratchet

(ZEEnit 600/650/700/650P/700P)

407-401.037 Extension 1/4"

(ZEEnit 600/650/700/650P/700P)

FLAME TECHNIQUE

Burner-Nebulizer-System

(Teflon, PEEK)

702-A63.623 Seal rings for siphon ａnd mixing compartment

16 / 60

Consumables AAS

Analytik Jena AG

Order number Description

702-A63.621 Seals rings for nebulizer

407-160.411 Replacement-set 2 for scraper

(1x plug plate, 3x screws, 3x nuts, 3x washers)

702-A63.626 Impact bead, 2 pieces

407-140.177 Impact bead, PTFE coated, 1 piece

(to work with HF)

702-A63.101 Spare parts for burner acetylene/air (Ti screw ａnd spacer)

702-A63.103 Spare parts for burner acetylene/N2O (Ti screw ａnd spacer)

17 / 60

Consumables AAS

Analytik Jena AG

Order number Description

702-A63.641 cap nebulizer (PEEK)

702-A63.625 Pack of 5 pieces cleaning wires

702-A63.624 Pack of 50 pieces cleaning rods

407-140.030 PEEk spray chamber (recommended for difficult sample matrix)

407-111.001 Quartz tube for HPT burner head (5 cm slit length)

18 / 60

Consumables AAS

Analytik Jena AG

Order number Description

702-A63.204 Cleaning part for burner acetylene/N2O (long version)

407-A63.505 Screw (PEEK) for Syphon (special model)

replaced by 407-111.316

407-111.316 Screw (PTFE or PP) for Syphon

407-1508.108 level sensor for organic issues

19 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-140.014 Set Seal ring for siphon ａnd mixing compartment for organic samples

(Kalrez)

20 / 60

Consumables AAS

Analytik Jena AG

Order number Description

Burner-Nebulizer-System

(Ryton - MK)

407-111.837 Waste tube siphon (1,3m)

407-111.006 Inlet tube

0.8 mm x 1.4 mm with couple unit

(40 cm for manual work)

407-111.008 Inlet tube AS51S/AS52S (PTFE)

(cannula AS to nebulizer)

0.8 mm x 1.4 mm

50 cm

407-403.311 Apiezon-grease in tube

407-140.411 Replacement-set 1 for scraper

(Scratches, screws)

21 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-160.411 Replacement-set 2 for scraper

(1x plug plate, 3x screws, 3x nuts, 3x washers)

407-111.407 Mixing wing

407-111.401 Mixing chamber

contrAA 300: from S/N 1600346

contrAA 700: from S/N 161K0335

ZEEnit 700P: from S/N 150Z7P0191

novAA 350: from S/N AA1A0908056

407-111.475 Mixing chamber plugs

407-403.147 O-ring 8,5 x 1,8 for nebulizer

702-A63.625 Pack of 5 pieces cleaning wires

22 / 60

Consumables AAS

Analytik Jena AG

Order number Description

702-A63.624 Pack of 50 pieces cleaning rods

407-111.865 Impact bead (N2O-FL-long/ceramic)

407-111.860 Impact bead (standard-short/ceramic)

407-111.001 Quartz tube for HPT burner head (5 cm slit length)

407-111.409 Knurled screw for mixing-chamber-parts

23 / 60

Consumables AAS

Analytik Jena AG

Order number Description

702-A63.204 Cleaning part for burner acetylene/N2O (long version)

407-111.316 Screw (PTFE or PP) for Syphon

407-1508.108 level sensor for organic issues

407-143.021 Set sealing rings mixing-chamber-nebulizer-system

Set 0-ring mixing chamber

plug with 0-ring

0-ring 8.5 x 1.8 for nebulizer

407-111.402 Set o-rings for organic samples

24 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-111.005 Set o-rings mixing chamber

407-111.501 Nebulizer (graphite)

useable with mixing-chamber-nebulizer-system III (brown)

further spare parts

407-140.040 Waste bottle

25 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-110.499 Drip pan (novAA 300, 350,400 ; contrAA 300,700)

407-160.411 Replacement-set 2 for scraper

(1x plug plate, 3x screws, 3x nuts, 3x washers)

407-140.015 Sample table, complete

407-A63.601 Standard nebulizer - nebulizer rate 4..7 ml/min, complete

ZEEnit 700: to S/N 150Z70184 usable

novAA 400: to S/N 140V497 usable

novAA 400 F: to S/N 140F133 usable

novAA 310: 315/330BU to S/N 1101261 usable

contrAA 300: to S/N 1600022 usable

407-A63.605 Standard nebulizer - nebulizer rate 4..7 ml/min, complete

for all AAS-units produced from January 2006

allcontrAA 300/700, ZEEnit 700P, novAA 350

ZEEnit 700: from S/N 150Z70185 usable

novAA 400: from S/N 140V498 usable

novAA 400 F: from S/N 140F134 usable

contrAA 300: from S/N 1600023 usable

contrAA 700: from S/N 161K0335 usable

Spare Parts Autosampler

AS 51 / 52

26 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-232.358 Waste tube Tygon (1,5 m)

407-140.192 Cannula for intake tubing AS51 Pt/Rh

407-232.384 Tip guide part for AS51 without cannula

407-232.394 Pack of 50 pieces PP-sample cups with 18 ml

407-400.052 Pack of 100 pieces sample cups - medicine, 3 ml, conical

27 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-232.393 Pack of 50 pieces PP- sample cups, 8 ml

407-232.392 Sample hood

for AS 51/52

407-232.391 Sample tray 53 positions for cups with 18 ml, metal Teflon coated

407-140.031 Set -cannula AS52 covered (for intake-and dosing tubing / Pt/Rh) incl.

cannula tipguide

AS 51 s, AS 52 s

for serial number in format XX.XX.XX

407-400.057 Pack of 100 pieces Sarstedt PP- sample cups with 15 ml

28 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-400.054 Pack of 50 pieces Sarstedt PP- sample cups with 30 ml

407-401.827 Sample tray 49 positions for cups with 30 ml, PP corrosion resistant

407-400.007 Sample tray 49 positions for cups with 30 ml, metal teflon coated

(replacement for old autosampler )

407-401.828 Sample tray 87 positions for cups with 15 ml, PP corrosion resistant

407-400.043 Sample tray 87 positions for cups with 15 ml, metal teflon coated,

(replacement for old autosampler)

407-140.032 Set -cannula AS52s covered (intake ａnd dosing tubing Pt/Rh); incl.

Cannula tipguide

diameter: 0,5 cm

29 / 60

Consumables AAS

Analytik Jena AG

Order number Description

AS 51 s, AS 52 s

for serial number in format XXX.XXX ａnd XXXXXXXXX

407-232.358 Waste tube Tygon (1,5 m)

407-402.599 Inlet Tube (Tube - Valve)

407-402.598 Inlet Tube (nebulizer - autosampler)

30 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-140.373 Inlet Tube (nebulizer - autosampler, PTFE)

407-402.568 Cap for glass-sample cups 22 ml, 50 pieces

407-402.928 Lid for glass-sample cups 40 ml, 30 pieces

407-400.354 Dosing unit 5 ml

407-403.159 Dosing unit 5 ml

for AS 52s from S/N 703801 (March 2007)

407-402.567 Glass-sample cups 22 ml, 50 pieces

31 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-402.927 Glass-sample cups 40 ml, 30 pieces

407-402.600 Cannula complete with guiding AS 51S

407-402.601 Set - cannula AS 52S complete

diameter: 0,53 cm

407-400.057 Pack of 100 pieces Sarstedt PP- sample cups with 15 ml

407-400.054 Pack of 50 pieces Sarstedt PP- sample cups with 30 ml

32 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-402.926 Pack of 30 pieces Sarstedt PP- sample cups with 50 ml

407-402.602 Sample tray cover

for AS 52s/51s

407-402.880 Sample tray 30 positions, 50 ml

407-401.827 Sample tray 49 positions for cups with 30 ml, PP corrosion resistant

407-401.828 Sample tray 87 positions for cups with 15 ml, PP corrosion resistant

33 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-232.379 PTFE Dosing tube ( bottle valve - cannula )

407-402.594 Tube fixing for autosampler arm

407-400.707 Wide neck bottle 2,000 ml (with cap)

other parts for Autosampler

34 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-230.067 Wide neck bottle 750 ml

407-233.912 Wide neck bottle 1,000 ml (with cap)

407-400.707 Wide neck bottle 2,000 ml (with cap)

Pump ａnd Connecting Tubings

35 / 60

Consumables AAS

Analytik Jena AG

Order number Description

702-A63.614 Intake tubing PTFE

d = 0,5 mm; with coupler, 42 cm

(recommended for manual operating)

702-A60.536 Tubing for siphon ａnd waste bottle; 8 x 11,2; 1,3 m

tubings SFS 5

702-A61.210 Tubing set complete (tubing + y-piece)

407-140.828 Tubing set complete Teflon (tubing + y-piece)

36 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-232.274 Silicon tubing; 0,5 mm x 2,1 mm (intake tubing 500 mm)

702-A61.251 Silicon tubing; 0,8 mm x 2,4 mm; 700 mm

tubings SFS 6

407-140.329 Tube to nebulizer

37 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-140.328 Tube to sample or autosampler

407-140.327 Tube to supply bottle

Compressor

407-232.804 Input filter / intake filter

38 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-232.376 Special oil SJ27 (0.5 l)

407-232.800 Submicro filter 0.01 μm

HYDRIDE TECHNIQUE

Systeme HS 51, HS 52, HS 53, HS 55 until S/N 1190230

407-A65.206 Set tubing for reaction gas

(viton tubing for Hg, tygon tubing for hydride)

only for HS55

Cell unit

39 / 60

Consumables AAS

Analytik Jena AG

Order number Description

702-A65.135 Drain tubing

702-A54.012 Quartz cell without windows

407-A65.204 Set of 2 pieces ring for quartz window

407-A65.203 Set of 2 pieces quartz window

407-A65.206 Set tubing for reaction gas

(viton tubing for Hg, tygon tubing for hydride)

only for HS55

Hg-Enrichment HS51 / HS 53

702-A65.036 Collar for passing of the heating wire

40 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-A65.03X Tube with gold collector with heating element

407-A65.031 Set of 6 pieces O-rings for Hg-enrichment unit

Batch-Module - Accessories for the discontinuous mode HS 51 / HS 53 / HS 55 until S/N

1190230

407-233.916 12 pieces pump tubing for reducing agent / Batch-mode,

Tygon, violett/violett; d = 2.06 mm; s = 0.80 mm

407-401.241 6 pieces pump tubings for reducing agent / waste

Ismaprene; violett/ violett; d = 2.06 mm

HS 55: (only for HS55/HS55A)

407-232.656 Set O-rings for reaction beaker, 32 x 3 mm, 5 pieces

41 / 60

Consumables AAS

Analytik Jena AG

Order number Description

702-A65.081 Dosing tubing PTFE, 1 x 2 mm, length 250 mm long

702-A65.063 Dosing tip, PTFE (only for use of SnCl2)

407-A65.025 Pipette tip 200 - 1,000 μl; pack of 2 x 96 pieces

702-A65.021 1 piece PTFE reaction beaker with conical bottom, flange seal

407-A65.022 Set O-rings for head

407-119.012 Set pump tubings with connectors ａnd insert- ａnd dosing tubing

42 / 60

Consumables AAS

Analytik Jena AG

Order number Description

Accessories for the continuous mode HS 51 / HS 53

407-233.909 12 pieces pump tubing for waste, tygon, violet/orange/violet d = 2.54

mm

407-233.907 6 pieces pump tubing for sample

Ismaprene gelb/gelb; d = 1.42 mm; s = 0.80 mm

407-233.906 6 pieces pump tubing for acid ａnd reducing agent NaBH4

Ismaprene orange/orange; d = 0,89 mm; s = 0,80 mm

Hydridsystem: (only for HS60/HS60A)

407-A65.066 Tube set for waste

702-A65.141 PTFE tube with screw

702-A65.140 Reactor complete

43 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-A65.064 Set tubing coupling (1 piece)

407-170.087 Snap-in tube cassette

gas supply

702-A60.068 Pressure tubing for Argon, 5 m

702-A65.010 Gas input for Hg

general accessories

407-A65.040 Filling for gas liquid separator (only pointed flask)

44 / 60

Consumables AAS

Analytik Jena AG

Order number Description

702-A65.201 Replacement units for gas liquid separator (kaskade - new type)

407-A65.003 Replacement units for gas liquid separator (pointed flask for foaming

samples)

702-120.019 Hg-cleaning agent 25 g

407-233.912 Wide neck bottle 1,000 ml (with cap)

drying unit

702-A65.095 Separator

45 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-A65.019 Drying membran with adapter for HS 51, 52, 53, 55

407-233.865 Set of 10 pieces PTFE-collar, NS 10/19

407-233.864 Set of 10 pieces PTFE-collar, NS 14/23

702-A65.094 Drying vessel

702-A65.091 U-tube

702-A65.082 tubing viton, 5 x 8 mm, 2 m long

46 / 60

Consumables AAS

Analytik Jena AG

Order number Description

HYDRIDE TECHNIQUE

Systeme HS 60, HS 60A, HS 55 from S/N 5510100, HS 55A

407-401.241 6 pieces pump tubings for reducing agent / waste

Ismaprene; violett/ violett; d = 2.06 mm

HS 55: (only for HS55/HS55A)

407-233.906 6 pieces pump tubing for acid ａnd reducing agent NaBH4

Ismaprene orange/orange; d = 0,89 mm; s = 0,80 mm

Hydridsystem: (only for HS60/HS60A)

407-170.531 Waste tube

47 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-170.052 Intake Tubing for acid ａnd reducing agent

MFA (complete)

407-401.984 O-ring flange

407-232.656 Set O-rings for reaction beaker, 32 x 3 mm, 5 pieces

407-170.590 Gas liquid separator

48 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-401.734 Gas tube 3 x 5 mm, 2 m

407-170.097 Amalgamation with heating unit

810-60051-0 Hg cell (tulip)

407-A65.025 Pipette tip 200 - 1,000 μl; pack of 2 x 96 pieces

407-170.541 Sample aspiration hose

49 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-170.050 Sample inlet tube

(sample tube, pump tube, connecting tube 2er-Ventil)

HS 60: till S/N: 600615; 110V till S/N: 6005002

HS 60 A: till S/N: 62A0161; 110V till S/N: 60A5003

407-170.530 Pump/dosing tube for batch module

702-A54.012 Quartz cell without windows

702-A65.021 1 piece PTFE reaction beaker with conical bottom, flange seal

50 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-170.535 Reactor tube (Loop - MFA) 50 cm

407-A65.204 Set of 2 pieces ring for quartz window

407-170.001 set quartz window contrAA 700, 2 pieces

－－> recommended for contrAA 700

98% transmission

Replace article 170:001.00.

407-A65.203 Set of 2 pieces quartz window

407-170.087 Snap-in tube cassette

51 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-170.536 Drying tube (large)

not from

HS60A S/N 62A0162

HS60 S/N 600616

HS60A (110V) S/N 60A5004

HS60 (110V) S/N 6005003

HS 60: S/N: 600615; 110V till S/N: 6005002

HS 60 A: till S/N: 62A0161; 110V till S/N: 60A5003

407-170.543 Drying tube Hg - new

407-170.548 Drying-membrane hydrid - new

HS 60: from S/N: 600616; 110V from S/N: 6005003

HS 60 A: from S/N: 62A0162; 110V from S/N: 60A5004

52 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-401.735 Tygon tube 1000 mm

407-170.534 Connection tube 2-Valvegroup Reactor

407-170.538 Connection tube Reactor-Gas-Liquid separator

53 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-170.532 Connection tube Valvegroup Amalgamation unit

407-170.537 Connection tube cell

407-170.571 Reserve bottle reducing agent; 1,000 ml

407-170.167 Reserve bottle acid; 1,000 ml

54 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-170.528 Pre-drying tube (short)

HS60A till S/N 62A0161

HS60 till S/N 600615

HS60A (110V) till S/N 60A5003

HS60 (110V) till S/N 6005002

HS 60: till S/N: 600615; 110V till S/N: 6005002

HS 60 A: till S/N: 62A0161; 110V till S/N: 60A5003

HS 50

407-232.656 Set O-rings for reaction beaker, 32 x 3 mm, 5 pieces

407-170.612 Holder for Quartzcell

407-A65.025 Pipette tip 200 - 1,000 μl; pack of 2 x 96 pieces

702-A65.050 Quartzcell HS50

55 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-170.654 Reagent bottle with lid for HS50

702-A65.021 1 piece PTFE reaction beaker with conical bottom, flange seal

407-170.600 Set window with ring

407-170.651 Connection tube to Quartzcell

HydrEA - TECHNIC

56 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-170.529 Adapter tube MPE

(HS50, HS55, HS55A, HS60, HS60A)

407-A65.905 Gas tube MPE 50

(HS51, HS52, HS53, HS55 bis S/N 1190230)

702-A65.006 Titan cannula

Accessories direct solid sampling

microbalance

407-400.545 Micro spatula

702-A60.701 Modified balance table

407-A60.701 V24-connecting cable to AAS

57 / 60

Consumables AAS

Analytik Jena AG

Order number Description

spare parts solid sampler

407-153.018 Tweezers titan top for SSA 6

407-153.019 Tweezers titan down for SSA 6

407-400.850 Sample magazine for SSA 51, SSA 61/ 61z

407-401.044 Connecting cable AAS - Solid sampler

407-400.380 Tongs for SSA 5

407-401.046 Tongs for SSA 6z

SSA 600

58 / 60

Consumables AAS

Analytik Jena AG

Order number Description

407-402.953 Rotary plate, 42 positions

Please notice that the rotary plate is without position label. Please order the

label with the article number 29-1100-176-10 separately.

407-900.001 Capillary hose (rinsing bottle - dispenser)

407-900.002 Capillary hose (rinsing bottle - tubing guide)

407-402.971 Upper tip, Graphit, 3 pieces

407-150.920 Lower tip, 1 piece, made of titanium

59 / 60

Consumables AAS

Analytik Jena AG

Order number Description

Warranty claims ａnd claims related to the fulfillment of manufacture＇s technical specification can only be accepted by using

original Analytik Jena components, spares ａnd consumables.

Specifications ａnd order numbers are subject to changes due to further technical development.

Prices are quoted exclusive of value added tax.

Purchase is subject to the General Terms ａnd Conditions of Analytik Jena AG.

Powered by TCPDF (www.tcpdf.org)

60 / 60

Consumables AAS

Analytik Jena AG

Back to start

analytikjena

Consumables

AFS

1 / 17

Order number Description

Hg-ANALYZER mercur

Tubings

407-401.241 6 pieces pump tubings for reducing agent / waste

Ismaprene; violett/ violett; d = 2.06 mm

407-233.906 6 pieces pump tubing for acid ａnd reducing agent NaBH4

Ismaprene orange/orange; d = 0,89 mm; s = 0,80 mm

mercur: (SnCl2)

407-170.054 Waste tubing, complete

2 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-170.055 Waste tubing onto the outlet nozzle

407-170.060 Insert tubing for acid ａnd reducing agent

(MFA with female screw)

407-401.734 Gas tube 3 x 5 mm, 2 m

3 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-170.064 Cell tubing (from 4-valve group to the cell)

407-170.541 Sample aspiration hose

407-170.050 Sample inlet tube

(sample tube, pump tube, connecting tube 2er-Ventil)

407-170.057 Reactor ａnd connector tubing, 25 cm

incl. connectors (reactor loop)

4 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-170.535 Reactor tube (Loop - MFA) 50 cm

407-170.114 Tubing set

consist of:

- Sample tubing

- Pump tubing for acid ａnd reducing agent, pack of 6 pieces

- Pump tubing for waste, pack of 6 pieces

- Connector tubing from reactor to GLS

- Reactor ａnd connector/ tubing

- Connection tubing from reactor to double valve group

- ｉnsert tubing for acid ａnd reducing agent

407-170.058 Connector tubing from reactor to GLS

407-170.056 Connection tubing from reactor to double valve group

5 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-170.066 Connection tubing between 4-valve group ａnd gold collector, short

407-170.068 Connection tubing between 4-valve group ａnd gold collector, long

Replacement units

170:136.11 activated carbon filter for gas outlet

407-170.196 Activated Carbon Filter for inlet gas

6 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-170.240 Gas-liquid separator

407-170.097 Amalgamation with heating unit

407-401.502 Hg-low pressure lamp

407-170.087 Snap-in tube cassette

407-170.063 Drying membrane

7 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-170.067 Predrying membran (between GLS ａnd bubble sensor)

Consumables

407-140.040 Waste bottle

8 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-170.052 Intake Tubing for acid ａnd reducing agent

MFA (complete)

407-170.088 Cleaning wire

407-401.072 Fuse type for 110 V (T6, 3 A/H)

407-401.973 Fuse type for 230 V (T3,15 A/H)

407-170.089 Storage bottle reducing agent; 1,000 ml

9 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-170.167 Reserve bottle acid; 1,000 ml

Spare Parts Autosampler

AS 51 / 52

407-140.192 Cannula for intake tubing AS51 Pt/Rh

407-232.394 Pack of 50 pieces PP-sample cups with 18 ml

407-400.052 Pack of 100 pieces sample cups - medicine, 3 ml, conical

407-232.393 Pack of 50 pieces PP- sample cups, 8 ml

10 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-232.392 Sample hood

for AS 51/52

407-232.391 Sample tray 53 positions for cups with 18 ml, metal Teflon coated

407-140.031 Set -cannula AS52 covered (for intake-and dosing tubing / Pt/Rh) incl.

cannula tipguide

AS 51 s, AS 52 s

for serial numbers in format XX.XX.XX

407-232.384 Tip guide part for AS51 without cannula

407-400.057 Pack of 100 pieces Sarstedt PP- sample cups with 15 ml

11 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-400.054 Pack of 50 pieces Sarstedt PP- sample cups with 30 ml

407-401.827 Sample tray 49 positions for cups with 30 ml, PP corrosion resistant

407-400.007 Sample tray 49 positions for cups with 30 ml, metal teflon coated

(replacement for old autosampler )

407-401.828 Sample tray 87 positions for cups with 15 ml, PP corrosion resistant

407-400.043 Sample tray 87 positions for cups with 15 ml, metal teflon coated,

(replacement for old autosampler)

407-140.032 Set -cannula AS52s covered (intake ａnd dosing tubing Pt/Rh); incl.

Cannula tipguide

diameter: 0,5 cm

12 / 17

Consumables AFS

Analytik Jena AG

Order number Description

AS 51 s, AS 52 s

for serial numbers in format XXX.XXX

407-232.358 Waste tube Tygon (1,5 m)

407-402.568 Cap for glass-sample cups 22 ml, 50 pieces

407-402.928 Lid for glass-sample cups 40 ml, 30 pieces

407-400.354 Dosing unit 5 ml

407-403.159 Dosing unit 5 ml

for AS 52s from S/N 703801 (March 2007)

13 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-402.567 Glass-sample cups 22 ml, 50 pieces

407-402.927 Glass-sample cups 40 ml, 30 pieces

407-403.227 Glass-Sample cups with lid, 12 ml, 50 pieces

for AS51s/52s (mercur)

407-402.600 Cannula complete with guiding AS 51S

407-402.601 Set - cannula AS 52S complete

diameter: 0,53 cm

14 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-400.057 Pack of 100 pieces Sarstedt PP- sample cups with 15 ml

407-400.054 Pack of 50 pieces Sarstedt PP- sample cups with 30 ml

407-402.602 Sample tray cover

for AS 52s/51s

407-402.880 Sample tray 30 positions, 50 ml

407-401.827 Sample tray 49 positions for cups with 30 ml, PP corrosion resistant

15 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-401.828 Sample tray 87 positions for cups with 15 ml, PP corrosion resistant

407-232.379 PTFE Dosing tube ( bottle valve - cannula )

407-402.594 Tube fixing for autosampler arm

407-400.707 Wide neck bottle 2,000 ml (with cap)

other parts for Autosampler

16 / 17

Consumables AFS

Analytik Jena AG

Order number Description

407-230.067 Wide neck bottle 750 ml

407-233.912 Wide neck bottle 1,000 ml (with cap)

Warranty claims ａnd claims related to the fulfillment of manufacture＇s technical specification can only be accepted by using

original Analytik Jena components, spares ａnd consumables.

Specifications ａnd order numbers are subject to changes due to further technical development.

Prices are quoted exclusive of value added tax.

Purchase is subject to the General Terms ａnd Conditions of Analytik Jena AG.

Powered by TCPDF (www.tcpdf.org)

17 / 17

Consumables AFS

Analytik Jena AG

Back to start

原创作者：北京谱飞科技有限公司