安装型式 | 型号 | 电源 | 传感器输入 | 4-20mA输出 | 集电极开路/继电器 |
现场安装 | 3-8850-1 | 4 | 1 | 1 | 1路集电极开路高、低、脉冲、频率或关闭 |
3-8850-2 | 4 | 1 | 1 | 2路继电器高、低、脉冲或关闭 | |
3-8850-3 | 4 | 1 | 2路,电导/电阻或温度 | 2路集电极开路高、低、脉冲、频率或关闭 | |
盘装 | 3-8850-1P | 4 | 1 | 1 | 1路集电极开路高、低、脉冲、频率或关闭 |
3-8850-2P | 4 | 1 | 1 | 2路继电器高、低、脉冲或关闭 | |
3-8850-3P | 4 | 1 | 2路,电导/电阻或温度 | 2路集电极开路高、低、脉冲、频率或关闭 |
安装型式 | 型号 | 电源 | 传感器输入 | 4-20mA输出 | 集电极开路/继电器 |
现场安装 | 3-8750-1 | 2 | 1 | 1 | 1路集电极开路高、低、脉冲、频率或关闭 |
3-8750-2 | 4 | 1 | 1 | 2路继电器高、低、脉冲或关闭 | |
3-8750-3 | 4 | 1 | 2路,pH、温度或ORP | 2路集电极开路高、低、脉冲、频率或关闭 | |
盘装 | 3-8750-1P | 2 | 1 | 1 | 1路集电极开路高、低、脉冲、频率或关闭 |
3-8750-2P | 4 | 1 | 1 | 2路继电器高、低、脉冲或关闭 | |
3-8750-3P | 4 | 1 | 2路,pH、温度或ORP | 2路集电极开路高、低、脉冲、频率或关闭 |
美国+GF+SIGNET 4150浊度仪 浊度仪3-4150-1 0-1000NTU,无超声波自清洗功能浊度仪3-4150-3 0-100NTU, 带超声波自清洗功能浊度仪3-4150-5 0-1000NTU,带超声波自清洗功能浊度仪提供精确符合EPA要求的水质监测,可用于市政和工业水处理设备。 signet浊度仪采用90度光来测量低速流过玻璃管反射水中的杂质。可调节玻璃管出口的背压阀来减少液体中的气泡。试管是放在一个密封避光的腔室内,可做连续的在线测量。并有一个可更换的干燥剂包确保测量环境。校准非常简单快捷,五分钟内即可完成。将玻璃试管从测量腔室取出放在试管架上,入口和出口仍连接。采用所配的标准液进行标定,无需再配置化学剂。校准完成,只需将试管再放回测量腔内就可继续测量了。 4150还配有干燥剂更换提示、玻璃自动/超声清洗功能,以便于维护。4150有两种量程可选。0 -100 NTU 型的用于低量程应用,如饮用水监测。0 - 1000 NTU 型的可用于各种场合,如原水、废水等。
美国+GF+SIGNET 3-2551-P0-11 电磁流量计 原装正品(现货特价)
2551型插入式电磁流量计选型表 | |||||
3-2551 | 材料 | 本体 | 电极,接地环材料 | ||
不 带 显 示 型 | -P | PP | 316LSS | ||
-W | PVDF | 316LSS | |||
| 管子尺寸选项 | ||||
0 | DN15-100mm | ||||
1 | DN125-200mm | ||||
| 显示选项 | 选项说明 | |||
-1 | 不带显示 | ||||
| 输出选项 | ||||
1 | 频率或数字输出 | ||||
2 | 4-20mA输出 | ||||
3-2551 | -P | 0 | -1 | 2 | 选型举例说明 |
美国+GF+SIGNET 3-2000-1-1 小流量传感器 原装正品(现货特供)
美国+GF+SIGNET 3-2507.100-4V 小流量传感器 原装正品(现货销售) The Signet 2507 Mini Flow Sensor contains a free-running rotor that is driven by the fluid flow. Within the given measurement range, the rotational speed of the rotor is proportional to the fluid flow rate. Magnets built into the rotor trigger an electronic switch in the top of the sensor creating a square-wave output. Both opaque and transparent fluids can be measured from 0.2 to 20.0 centistokes. 8900 Multi-Parameter Controller
美国+GF+SIGNET 3-2100 小流量传感器 原装正品(现货特供)
Engineered specifically for small diameter applications, the Signet 2100 Turbine Flow Sensor provides accurate readings in two flow ranges: 0.3 to 3.8 lpm and 3 to 38 lpm (0.1 to 1 gpm and 0.8 to 10 gpm).
The injection-molded PVDF body and ceramic bearings provide excellent chemical compatibility and long service in dosing and batching applications. Union piping and tubing connections along with removable NEMA 4X electronics allow for easy assembly and field replaceability. The 2100 can be used with DN8 (¼ in.), DN10 (3/8 in.) DN15 (½ in.) tubing, or DN15 (½ in.) piping for simple installation. End connections are available in PVDF for hose barbs, fusion socket or IR/butt fusion, and in PVC for socket or NPT thread.
8900 Multi-Parameter Controller