德森克电容标签传感器]-上海毅宾电气专业销售特点:槽距 0.4mm…1.0mm 输出方式 pnp/npn NO/NC工作频率高 max. 4.000HZ抵御外光 max. 100.000lux 短路保护连接插头电缆、示教功能/远程示教功能可检测金属、非金属标签此产品最适合用于印刷行业
德森克光电标签传感器]-上海毅宾电气专业销售特点:光源 红外光槽距 2.0mm…5.0mm 输出方式 pnp/npn NO/NC 亮通/暗通工作频率高 max. 10.000HZ抵御外光 max. 100.000lux 防护等级高灵敏度可通过示教按钮调节连接插头电缆、示教功能/远程示教功能此产品最适合用于印刷行业
此款获奖的电容式透明标签传感器以其准确、可靠、稳定的配准完成对透明和纸质标签的检测。当更换滚轴或环境变化时,无需进行调节。此款透明标签传感器也是检测接合处的绝佳之选!同时,对纸质标签的检测也异常精确。
电容技术是迄今为止速度最快的标签检测技术。更快速 = 更精确的配准和标签位置。将其 20 微秒的响应时间与其他技术 300-500 微秒的响应时间进行对比。
对于金属标签或箔印刷图案标签 -选用 LRD6110。
响应时间 | 20 微秒 |
精确度 | 0.2 毫米 |
开关频率 | 10 kHz |
操作温度 | 4°C-50°C |
输出 | NPN、PNP 开路集电极 |
输入电源 | +11-28 VDC |
短路和超负荷保护 |
AutoGap Setup1. Start with High Gain off.2. Remove a label from the web.3. Place the area of the missing label in the sensor (liner only).4. Press for at least 1 second (lights begin to move back and forth).5. Release the button.6. Setup complete.7. Verify the light bar goes into the gray GAP area during gaps betweenlabels and into the gray LABEL area during labels. If necessary, usearrow keys to adjust manually.If light bar is not moving at least three or four lights, turn on High Gain.Manual AdjustmentWhen running, the light bar should extend from the gray LABEL area to thegray GAP area. The up and down arrows can be used to fine tune theadjustment if necessary.If the adjustments reach the end of their range, the last light in the GAP or LABEL area will flashthree times when the button is pressed.The light bar may move toward LABEL while the Up arrow is pressed. This is because the sensorbody is deflecting and making the slot smaller. It will return when the button is released and will notaffect setup.Metal/Foil Label SetupAutoGap Setup on a missing label area may not work reliably for rectangular metallic labels (foil ormetalized Mylar). In this case, place an actual gap in the sensor (use alignment groove on thesensor). Then hold the Gap button down for AutoGap as above. Move labels slowly through thesensor. Use manual adjustments if necessary to ensure the light bar is in the LABEL area duringlabels and GAP area during gaps. If the sensor still cannot be adjusted for reliable operation, youmay need the LRD8200 Ultrasonic Sensor.
LRD6300 电容式标签传感器可检测多数标签类型:透明、纸质、金属艺术品、金属油墨或烫印。还可检测接合处!LRD8200 对于固态箔标签(在箔上印有艺术图案)的检测尤为精确。
电容技术是迄今为止速度最快的标签检测技术。更快速 = 更精确的配准和标签位置 - 可检测多数标签类型。将 LRD6300 20 微秒的响应时间与其他技术 300-500 微秒的响应时间进行对比。
响应时间 | 20 微秒 |
精确度 | 0.4 毫米 |
开关频率 | 10 kHz |
操作温度 | 4°C-50°C |
输出 | NPN、PNP 开路集电极 |
输入电源 | +11-28 VDC |
短路和超负荷保护 |
TRI-TRONICS® introduces the very first Ultrasonic Clear Label Sensor with a High Performance Graphic OLED display. The OLED display provides the user with an unprecedented view of the sensor's performance, options, program modes, and helpful simple instructions never before offered in a Clear Label Sensor. Designed into the sensor are all the Ease-of-Use characteristics that have made Tri-Tronics' sensors so well known in the industry.
The Ultrasonic Clear Label Sensor is the answer to what the industry has been asking for...
a simple solution, with the ability to accurately adjust for repeatable and reliable performance.
Now "CONFIDENTLY" walk away from the labeling line, "KNOWING" the throughput is at peak performance and trouble free.
Features & Benefits:To contact one of our well-qualified Distributors near you to assist you in your purchase, click the Distributor button. To purchase yourself, click the Buy Now button.
Available Clear Label Sensor Models:
Clear Label Sensor with 6' Cable:
CLS-1
Clear Label Sensor with Connector:
CLSC-1CLSC-1M8
While designed for label detection, the LABEL•EYE™ can be useful in a variety of applications:
Available LABEL•EYE™ Sensor Models:
LERLERCLERC-M12LERR
High Speed Models:
LERC10LERR10LERC10-M12
MSK1000-0256光栅磁栅尺编码器SIKO读数头磁带MB100磁位移位置测量传感器磁性传感器 MSK1000
联系方式 131 16719459增量值编码,数字化接口,分辨率0.2μm
特点:
■ 大分辨率 0.2μm
■ 重复精度 ±1μm
■ 与磁尺间距达 0.4 mm
■ LED状态显示
■ 坚固的金属外壳
参数
名称 数据 备注
磁尺匹配型号 MB100
系统精度 ±10μm 磁尺MB100 的精度等为10μm
重复精度 max. ±1μm
与磁尺间隙 0.1 ... 0.4 mm 参考信号 O,I
0.1 ... 0.2 mm 参考信号 RB
运动速度 取决于分辨率及脉冲间隔 参照表格
外壳材料 铝压铸件 铝制盖,阳防锈处理
线缆类型 PUR 可装保护链
工作温度 -10 … +70 °C
存储温度 -30 … +80 °C
空气温度 100 % rF 防凝露
防护等 IP67
抗震性能 10 g/50 Hz
大测量长度 无限制 单卷大长度90 m
运动速度 Vmax (m/s)
分辨率(μm) 0.2 0.64 0.32 0.16 0.08
1 3.20 1.60 0.80 0.40
2 6.40 3.20 1.60 0.80
5 16.00 8.00 4.00 2.00
脉冲间隔时间(μs) 0.25 0.50 1.00 2.00
计数频率(kHz) 1000.00 500.00 250.00 125.00
电气参数
名称 数据 备注
工作电压 6.5 V DC ... 30 V DC UB 端带性保护
4.75 V DC ... 6 V DC UB 端无性保护
电流能耗 < 25 mA 空载
连接方式 散装线
圆型插头
9 针D-SUB
输出电路 LD, RS422
输出信号 A, /A, B, /B, I, /I, 或 R, /R
参考信号脉冲宽度 1 或4 个增量
分辨率 0.2, 1, 2, 5μm
抗干扰等 3 IEC-610006-2
实时请求 实时信号输出
信号高电平 > 2.5V
信号低电平 < 0.5V