DI-3N-IP5/IP50/IP200/IP500扭力校正仪
产品名称： DI-3N-IP5/IP50/IP200/IP500扭力校正仪
制 造 商： 思达(CEDAR)
产品种类： 测力、拉力仪器
所属行业： 电子及电路板工业模具及五金制造行业
深圳吉田科技发展有限公司是一家大型工具量具代理商！我公司经营产品如下: 1、 日本制：TOHNICHI（东日）扭力起子、起力扳手、扭矩表、瓶盖扭力测试仪 2、 日本制：KANON（中村）扭力工具、起力工具测试仪； 3、 日本制：思达(CEDAR)电批扭力测试仪;亚通力(ATTONIC)电批扭力测试仪； 4、 日本制：AIKOH（爱光）指针、数显式推拉力计、按键测试仪、弹簧拉压力测试仪； 5、 日本制：SHIMPO（电产）数显式推拉力计； 6、 日本制：ALGOL指针式推拉力计； 7、 日本制：PEAK（东海）放大镜； 8、 日本制：EIESN精密针规、SK精密针规； 9、 日本制：MITUTOYO（三丰）测量工具； 10、日本制：JPG精密塞规、环规； 11、日本制：PEACOCK（孔雀）百分表、千分表、测厚表、深度表； 12 日本制：TELOCK（得乐）橡胶硬度计、测厚规、深度表； 13、日本制：FUJITOOL（富士）半径规、角度尺； 14、日本制：KANETEC（强力牌）V型磁性座、磁性表座； 15、日本制：TOKYO SEIKI（精机株式会社）横向张力计及纺织专用张力计； 16、日本制：YOKOGAWA（横河）张力计、线速计；
相关产品链接:DI-3N-IP5/IP50/IP200/IP500扭力校正仪 DI-3N-IPS扭力校正仪
DI-3N-IPS扭力校正仪
产品名称： DI-3N-IPS扭力校正仪
制 造 商： 思达(CEDAR)
产品种类： 测力、拉力仪器
所属行业： 电子及电路板工业模具及五金制造行业
DI-3N-IPS扭力校正仪特点:
误差 ±0.5% 功能 LC:LCD显示
RS：RS232C输出口，LH：扭力设定功能；
MY：数据记忆功能
PO：电源自动关闭功能
IO：设定自动清零
外形尺寸 88(W)×108(D)×40(H)（不含测头）
配件 测量头1个DC20mmM4/M6/M8
包装盒AC充电器各一个
深圳吉田科技发展有限公司是一家大型工具量具代理商！我公司经营产品如下: 1、 日本制：TOHNICHI（东日）扭力起子、起力扳手、扭矩表、瓶盖扭力测试仪 2、 日本制：KANON（中村）扭力工具、起力工具测试仪； 3、 日本制：思达(CEDAR)电批扭力测试仪;亚通力(ATTONIC)电批扭力测试仪； 4、 日本制：AIKOH（爱光）指针、数显式推拉力计、按键测试仪、弹簧拉压力测试仪； 5、 日本制：SHIMPO（电产）数显式推拉力计； 6、 日本制：ALGOL指针式推拉力计； 7、 日本制：PEAK（东海）放大镜； 8、 日本制：EIESN精密针规、SK精密针规； 9、 日本制：MITUTOYO（三丰）测量工具； 10、日本制：JPG精密塞规、环规； 11、日本制：PEACOCK（孔雀）百分表、千分表、测厚表、深度表； 12 日本制：TELOCK（得乐）橡胶硬度计、测厚规、深度表； 13、日本制：FUJITOOL（富士）半径规、角度尺； 14、日本制：KANETEC（强力牌）V型磁性座、磁性表座； 15、日本制：TOKYO SEIKI（精机株式会社）横向张力计及纺织专用张力计； 16、日本制：YOKOGAWA（横河）张力计、线速计；
相关产品链接:DI-3N-IP5/IP50/IP200/IP500扭力校正仪 DI-3N-IPS扭力校正仪
DIS-RL05日本思达扭力校正仪器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
 | DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
 | DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DIS-RL6日本思达扭力校正仪器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DIS-RL2日本思达扭力校正仪器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DI-3N系列日本思达牌扭力校正仪
日本思达牌扭力校正仪 | ||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||
DI-RL6CEDAR思达扭力校正仪器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried （1） Display Board Became Legible. 丂（A Measurement modea unit. Other coded data is丂displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂（DIS series） 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time （every about 1/180 seconds）.丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% （or less 499亇3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （rightleft） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. （0.5 - 3.0 sec） | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories （one piece each） | 兂4 bits （亄）丂侐0/侐1 | 6.35HEX bits （亄）丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DI-RL2CEDAR思达扭力校正仪器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried （1） Display Board Became Legible. 丂（A Measurement modea unit. Other coded data is丂displayed.） （2） Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂（DIS series） 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time （every about 1/180 seconds）.丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% （or less 499亇3digit） | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW （rightleft） | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. （0.5 - 3.0 sec） | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format （Baud rate : 19200） | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100（W） x105（D） x33 （H） （It does not contain by the projection thing.） | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories （one piece each） | 兂4 bits （亄）丂侐0/侐1 | 6.35HEX bits （亄）丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DIS-RL6日本思达扭力校正仪器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
DIS-RL2日本思达扭力校正仪器
| Bolting measurement of screwbolt | |
| 仠 TORQUE TESTER 丂DIS-RL series | |
| Separate type merit! Detection part is compact. | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. |
| DIS-RL2 Measurement to 2N丒m It is easy to use measuring range widely. |
| DIS-RL6 Measurement to 6 N丒m | |
| A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions丂(DIS series) 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0乣500 mN 0.020乣5 kgf丒cm 0.020乣4.5 lbf丒in | 0.020乣2 N 0.20乣20 kgf丒cm 0.20乣18 lbf丒in | 0.20乣6 N 2.0乣60 kgf丒cm 2.0乣54lbf丒in | |||
| Accuracy | 亇0.5% (or less 499亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊4cells 丂450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | 兂4 | HEX 6.35 | ||||
| Accessories (one piece each) | 兂4 bits (亄)丂侐0/侐1 | 6.35HEX bits (亄)丂侐1/侐2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
最新产品
- 四两 智慧城市小镇建设 太阳能发电花 高效太阳能板 送货上门 公司 2025/6/21 18:10:13
- 四两 智慧工厂 光伏智能垃圾桶 垃圾分类设施 现货直发 厂商 2025/6/21 18:08:23
- 四两智能 植物园 led花树灯 检测空气湿度温度 加工定制 厂家 2025/6/21 18:06:31
- 四两 阳光电源 安装方便 多功能光伏座椅 冬季加热小区照明 2025/6/21 18:04:34
- 四两 智慧小镇 太阳能树 检测环境空气 零碳 生产厂家 2025/6/21 17:59:37
- 四两 光伏树景观 太阳能树 光热发电 零碳公园 智能化城市发展 2025/6/21 17:58:02
- 四两智能 公园 树木灯饰 实时监测设备数据 一站式服务 厂 2025/6/21 17:56:21
- 四两科技 太阳能灯箱垃圾桶 感应开门 规格齐全 公司 2025/6/21 17:53:11
- 四两 园林智慧光伏树 太阳能景观 充电照明 零碳工厂创建 2025/6/21 17:51:50
- 四两 智慧小镇 太阳能发电光伏树 光伏建筑产品 生产厂家 2025/6/21 17:48:21
- 太阳能发电的光伏树 降碳减排 智慧小镇 景观设施 fik-f3+c 2025/6/21 17:46:38
- 四两 太阳能伸缩系统 移动伸缩多功能 移动应急发电 支持定制 2025/6/21 17:45:05
- 四两 低零碳校园 光伏步道发电地砖 太阳能景观 绿色环保清洁 2025/6/21 17:43:32
- 四两 三轮电动车车棚 分布式光伏充电站 能源稳定 抗风抗冻DY-11A2 2025/6/21 17:41:21
- 四两 太阳能宣传栏广告灯箱制作 镀锌钢材 信息传播 支持定制 2025/6/21 17:38:58
- 零碳学校校园创建 骑行发电设备 动感单车 绿色出行 支持定制 2025/6/21 17:37:26
- 四两科技 景观道 市政公园广场LED 太阳能景观地砖灯 2025/6/21 17:35:36
- 四两AOP-4651 主控芯片 短路保护 带顶棚款太阳能座椅 能远程监控 2025/6/21 17:33:49
- 四两 风力发电树 微风发电设施 提供清洁能源 支持定制 2025/6/21 17:32:26
- 96孔板磁力架进口平替碳环智造u型底96孔板磁力架v底96孔板磁力架 2025/6/21 17:31:45
- 四两 低零碳学校景观 太阳能树 光伏座椅 支持充电 可远程监控 2025/6/21 17:30:42
- 铸铁焊接平台作为焊接平板，实现高效焊接 2025/6/21 17:25:40
- 四两JI-7485 阳光电源 监测大气太阳能花 智慧发电设备 2025/6/21 17:22:42
- 铸铁焊接平台作为划线平台，提高生产效率 2025/6/21 17:22:15
- 铸铁焊接平台作为基准平台，确保测量精度 2025/6/21 17:18:41
- OKS 340/341高粘性链条保护剂 2025/6/21 17:12:03
- 机械制造领域中重要的工具：铸铁焊接平台 2025/6/21 17:05:30
- 高精度零部件的处理平台：铸铁焊接平台应用 2025/6/21 16:52:46
- 上海机械加工 上海精密加工 上海周边精密加工 五金配件加工 2025/6/21 16:47:55
- 机械加工中广泛应用的基准平台：铸铁焊接平台 2025/6/21 16:47:16