-
CPU : Slot-1 base support CeleronTM / Pentium® III up to 100MHz FSB
-
System Memory : Three 168-pin DIMM sockets up to 768MB SDRAM
-
System Chipset : Intel® 440BX chipset
-
BIOS : AMI PnP Flash BIOS
-
Video Controller :
－－> S3 Trio3D
－－> Bus : AGP 2X
－－> V-RAM : 4MB/8MB
－－> Resolution : 1600 x 1200 （ 64K colors ）
－－> Connector : DB-15 for CRT display
-
SCSI Controller :
－－> Chip : Adaptec AIC⁻⁷890
－－> Interface : 1 x Ultra2 SCSI （ 16-bit 80MB/Sec.; 68-pin connector ）
1 x UltraWide SCSI （ 16-bit 40MB/Sec.; 68-pin connector ）
1 x SCSI2 （ 8-bit 20MB/Sec.; 50-pin conector ）
－－> Drivers : Microsoft Windows NT, Windows 2000, Windows 95/98, Novell NetWare, SCO Openserver, SCO UnixWare, IBM OS/2 ａnd Linux
-
Super I/O :
－－> 2 x RS-232 ports
－－> 1 x parallel port （ support SPP/EPP/ECP mode ）
－－> IrDA port
-
USB ports : Two ports by pin-header, meets USB ver.1 standard
-
IDE : Dual Ultra DMA33 interface with tow 40-pin pin-header
-
FDD : One port
-
Watchdog Timer
-
LM78 hardware monitoring chip on board
-
SSD : One DiskOnChipTM socket
-
ISAPLUSTM : Designed to enhance the ISA bus drive capability
-
E2KeyTM : A non-volatile 1Kbit EEPROM is provided to retain application critical read/write data
-
Supports ATX power control function
-
Power Consumption :
8A@+5V, 240mA@+12V, 40mA@-12V （ Pentium® II 400MHz CPU ａnd 32MB EDO RAM ）
-
Operating Temperature : 0o ~ 55oC （ CPU needs cooler ）
-
Relative humidity : 5 ~ 95%, non-condensing
