SBC-SBX-VE ROBO 698

CPU

• Support Intel^® Socket 370 type Pentium^® III processors up to 850MHz

• Support Intel^® Celeron^® processors up to 700MHz

Chipset

• Intel^® 82440BX AGPset

Memory

• Four 168-pin DIMM sockets support up to 1GB of SDRAM with ECC function

BIOS

• AMI system BIOS （256KB flash ROM）

On-Board I/O

• On-board Winbond W83977ATF super I/O with two USB ports ａnd one IrDA infrared port

Watchdog Timer

• 8 time intervals from 0.5 sec. to 64 sec. by jumper setting or 255 intervals from 0.5 min. to 254.5 min. by software programming

Power Requirement

• +5V@6A （typ.）, +12V@140mA, -12V@30mA

Board Dimension

• 338.5（L） x 122（W） mm

• 13.33"（L） x 4.8"（W）

• 6-layer PCB

Operating Temperature

• 0 to 55ºC

Storage Temperature

• -20 to 75ºC

Relative Humidity

• 5% to 95%, non-condensing

Connector

• Support Mini DIN, 5-pin header & PS/2 type keyboard connector

Additional Functionality

On-board VGA

• Intel C&T 69000 chipset with built-in 2MB SDRAM

• Support display mode up to resolution 1280x1024 ａnd refresh rate 60Hz

• Support TFT/DSTN flat panel or CRT display simultaneously

On-Board 10/100 Base-T Ethernet

• Built with Intel 82559 Ethernet chip to support 10/100 Base-T connecting capability

DiskOnChip Flash Disk

• Support M-Systems＇ flash disk up to 288MB

ISA64 ISA-bus Driving Capability

• Support 64mA high driving capability for ISA-bus slot on backplane

ATX Power Control

• Modem-Ring-On ａnd Wake-On-LAN

• Highly integrated PICMG AIO SBC, based on the Intel Pentium III or Celeron processor with VGA display ａnd 10/100 Base-T Ethernet