产品展示
RENOLIN UNISYN CKC680原装正品
点击次数：110
价格：￥电议
更新日期：2026/4/28 21:07:35
生 产 地：中国大陆
产品型号：
简单介绍：Designed for use in industrial gearboxes and general lubricating systems subject to high temperatures,
相关标签：RENOLIN,UNISYN,CKC680
详细内容
| FUCHS RENOLIN UNISYN CKC齿轮油 详细说明 |
RENOLIN UNISYN CKC
| 
|  | Polyalphaolefin-Based Industrial Gear ａnd Lubricating Oils
| | | Polyalphaolefin-Based Industrial Gear ａnd Lubricating Oils
Designed for use in industrial gearboxes ａnd general lubricating systems subject to high temperatures, RENOLIN UNISYN CKC oils are fully-synthetic lubricants based on polyalphaolefins. RENOLIN UNISYN CKC oils lower friction ａnd reduce wear. Furthermore, these oils increase the efficiency of machine components. Depending on the application, a number of viscosity grades can be satisfied by a single RENOLIN UNISYN CKC oil. This allows users to rationalize stocks ａnd cut costs. Polyalphaolefins, ａnd thus RENOLIN UNISYN CKC oils, are miscible ａnd compatible with mineral oils at all ratios ａnd can be disposed-of as such. The compatibility of polyalphaolefins with common machinery materials, seals ａnd paint finishes is comparable with that of mineral oils. Changing-over to RENOLIN UNISYN CKC is therefore very simple ａnd requires no prior flushing. RENOLIN UNISYN CKC oils can be classified as CKC lubricating oils according to ISO 6743-6.
The specific benefits of using RENOLIN UNISYN CKC oils are:
- Extremely good ageing resistance
- Excellent corrosion protection
- Good cold-flowing properties
- Excellent viscosity-temperature behaviour
Application:
RENOLIN UNISYN CKC oils can be used in bearings, lubrication systems ａnd gearboxes subject to high or fluctuating temperatures.
In gearboxes ａnd lubricating systems where the sump temperatures exceed 90°C, normal mineral oil change intervals can be significantly extended with RENOLIN UNISYN CKC oils which, in turn, substantially lower operating ａnd disposal costs.
When changing-over to RENOLIN UNISYN CKC oils in machines ａnd equipment which operate at temperatures of over 60°C, one viscosity grade lower than the normal mineral oil grade should be selected.
| RENOLIN UNISYN CKC | | 68 | 100 | 150 | 220 | 320 | 460 | 680 | | | Lubricating oil type | | | | | | | | | | | acc. to ISO 6743-6 | | CKC 68 | CKC 100 | CKC 150 | CKC 220 | CKC 320 | CKC 460 | CKC 680 | | | acc. to DIN 51 502 | | HC 68 | HC 100 | HC 150 | HC 220 | HC 320 | HC 460 | HC 680 | | | Characteristics | Unit | | | | | | | | Test method | | Kinematic viscosity | | | | | | | | | | | at 40 °C | mm²/s | 72 | 104 | 151 | 221 | 315 | 479 | 668 | ASTM D 445 | | at 100 °C | mm²/s | 11.1 | 14.9 | 19.4 | 25.8 | 33.3 | 45 | 62 | ASTM D 445 | | Viscosity index | | 146 | 149 | 147 | 148 | 148 | 149 | 159 | ASTM D 2270 | | Density at 15 °C | kg/l | 0.837 | 0.842 | 0.848 | 0.85 | 0.851 | 0.853 | 0.855 | ASTM D 1298 | | Flash point, Cleveland open cup | °C | 248 | 254 | 230 | 232 | 234 | 304 | 262 | ASTM D 92 | | Pour point | °C | -51 | – 45 | – 45 | – 42 | – 39 | – 33 | – 33 | ASTM D 97 | | Neutralization number | mg KOH/g | 0.8 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | ASTM D 974 | | Foaming, | | | | | | | | | | | seq. I | ml | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | ASTM D 892 seq. I III | | seq. II | ml | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | ASTM D 892 seq. I III | | seq. III | ml | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | ASTM D 892 seq. I III | | Copper corrosion | degree of corr. | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | ASTM D 130 | | Rust prevention | | pass B | pass B | pass B | pass B | pass B | pass B | pass B | ASTM D 665 | | Four ball EP test | N | 2200 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | ASTM D 2783 | | FZG mechanical gear rig test | load stage | > 12 | > 12 | > 12 | > 12 | > 12 | > 12 | > 12 | DIN 51 354-2
| | | | |
RENOLIN,UNISYN,CKC680
