产品展示
供应福斯FUCHS RENOLIN MR20新闻资讯
点击次数：244
价格：￥电议
更新日期：2026/6/30 17:03:50
生 产 地：中国大陆
产品型号：
商家名片
李*
联系我时，请说明是阿仪网看到的，谢谢!
- 电话: 07********225
- 手机: 13******300
- 微信:
- 交换名片后展示联系方式 → →
相关标签：FUCHS,RENOLIN,MR,20,福斯液压油
详细内容
FUCHS RENOLIN MR油是满足此类应用多样性的润滑剂。
RENOLIN MR油已经开发了30多年，但仍是目前可用的领先液压油和润滑油之一。这证明了这些油的质量，也证实了FUCHS R + D实验室的先见之明，该实验室首先开发了这些清洁剂液压油。
RENOLIN MR系列油具有以下优点：
多用途润滑油
出色的防腐性能（给出了防腐油的特性）
出色的清洁和污泥输送性能
减少摩擦和磨损
良好的抗老化性
应用：
建议将RENOLIN MR多功能润滑油用于机器的磨合，功能测试和工作润滑。当在工厂注满油时，RENOLIN MR油即使在困难的条件下，例如在海外运输中，也能保证磨合过程中不会出现过度磨损和咬合，并能全面保护机械内部免受腐蚀。另一个优点是，工厂填充的机油可以一直保留在机器中，直到下一个例行换油间隔。
如果无法将出厂时的机器注满机器，则在功能测试后残留的RENOLIN MR油膜可为所有湿润的表面提供良好的腐蚀防护。当用于正常操作时，RENOLIN MR油可减少磨损，避免粘滑或摩擦振动并防止腐蚀。此外，它们确保油路保持清洁。
因此，如果需要在气缸和密封元件之间形成良好的润湿膜，以及在机械暴露于不利的大气条件（例如，温度波动大，从而形成冷凝水，空气中的粉尘）时，建议将RENOLIN MR油用于低速运动的机械中。例如在铸造厂，水泥制造厂或建筑工地，最后但并非最不重要的是，对于机床，尤其是使用与水混溶的切削液时。
RENOLIN MR 0，MR 1和MR 3是推荐用于机床和纺织机械的重型主轴油。 RENOLIN MR 0特别适用于转速超过2,000 rpm的磨床主轴。 RENOLIN MR 1适用于转速在600至2,000 rpm之间的机床主轴，以及转速高于10,000 rpm的纺织机械主轴。 RENOLIN MR 3适用于转速低于600 rpm的机床主轴，以及转速低于10,000 rpm的纺织机主轴。
RENOLIN MR 5，RENOLIN MR 10，RENOLIN MR 15是重型液压油，能够在短时间内承受超过100°C甚至最高120°C的连续温度。它们是液压设备的领先制造商推荐的产品，在某些情况下，它们是工厂灌装的。
RENOLIN MR 10也适用于动力转向系统。建议将RENOLIN MR 10，RENOLIN MR 15和RENOLIN MR 20用于中等负荷的变速器，尤其是那些装有电磁多离合器的变速器。建议将RENOLIN MR 30和RENOLIN MR 40用于重型变速器。
RENOLIN MR series oil has the following advantages:
Multipurpose lubricant
Excellent preservative properties (characteristics of preservative oils are given)
Excellent cleaning ａnd sludge transfer performance
Reduce friction ａnd wear
Good resistance to aging
application:
It is recommended to use RENOLIN MR multifunctional lubricating oil for running-in, function testing ａnd working lubrication of machines. When filled with oil at the factory, RENOLIN MR oil can ensure that excessive wear ａnd seizure does not occur during the running-in process even under difficult conditions, such as during overseas transportation, ａnd can fully protect the interior of the machine from corrosion. Another advantage is that the factory-filled oil can remain in the machine until the next routine oil change interval.
If it is not possible to fill the machine at the factory, the RENOLIN MR oil film remaining after the function test provides good corrosion protection for all wet surfaces. When used in normal operation, RENOLIN MR oil reduces wear, avoids stick-slip or frictional vibrations, ａnd prevents corrosion. In addition, they ensure that the oil circuit is kept clean.
Therefore, RENOLIN MR is recommended if a good wetting film is required between the cylinder ａnd the sealing element, ａnd when the machine is exposed to adverse atmospheric conditions (for example, large temperature fluctuations, which can cause condensation, dust in the air). Oil is used in low speed machinery. For example in a foundry, cement manufacturing plant or construction site, last but not least, for machine tools, especially when using water-miscible cutting fluids.
RENOLIN MR 0, MR 1 ａnd MR 3 are heavy duty spindle oils recommended for machine tools ａnd textile machinery. RENOLIN MR 0 is particularly suitable for grinding machine spindles with speeds exceeding 2,000 rpm. RENOLIN MR 1 is suitable for machine tool spindles with speeds between 600 ａnd 2,000 rpm, ａnd for textile machinery spindles with speeds above 10,000 rpm. RENOLIN MR 3 is suitable for machine tool spindles with speeds below 600 rpm ａnd textile machine spindles with speeds below 10,000 rpm.
RENOLIN MR 5, RENOLIN MR 10, RENOLIN MR 15 are heavy-duty hydraulic oils that can withstand continuous temperatures exceeding 100 ° C or even up to 120 ° C in a short period of time. They are products recommended by leading manufacturers of hydraulic equipment, ａnd in some cases they are factory-filled.
RENOLIN MR 10 is also suitable for power steering systems. RENOLIN MR 10, RENOLIN MR 15 ａnd RENOLIN MR 20 are recommended for medium-duty transmissions, especially those with electromagnetic multi-clutch transmissions. RENOLIN MR 30 ａnd RENOLIN MR 40 are recommended for heavy-duty transmissions.
FUCHS,RENOLIN,MR,20,福斯液压油
