Energol GR-XP 优 质 工 业 齿 轮 油 简 介 Energol GR-XP 工 业 齿 轮 油 是 一 系 列 高 质 量 的 极 压 润 滑 油。 具 有 非 常 好 的 热 稳 定 性 和 高 承 载 能 力。 其 添 加 剂 是 以 被 证 实(尤 其 在 潮 湿 情 况 下) 比 传 统 技 术 优 越 的 BP 无 灰 硫 磷 添 加 剂 为 基 础 的。 该 产 品 还 具 有 极 好 的 防 腐 性、 抗 泡 性、 抗 乳 化 性 和 抗 氧 性。 优 良 的 粘 度 特 性 确 保 了 寒 冷 气 候 下 设 备 起 动 扭 矩 不 会 过 大。 所 含 添 加 剂 与 工 业 齿 轮 装 置 中 的 铁 金 属 和 非 铁 金 属 相 兼 容。 主 要 优 点 - 为 各 种 齿 轮 提 供 良 好 的 抗 磨 性 - 在 标 准 大 修 之 间, 既 使 在 高 温 和 恶 劣 工 况 下, 也 不 用 特 殊 保 养 - 运 用 无 灰 技 术 提 供 最 好 的 防 腐、 抗 磨 性 - 既 使 在 潮 湿 环 境 下, 也 有 良 好 的 性 能 |
|
产品性能列表| BP齿轮用油性能指标 | 典 型 特 性 Energol GR-XP | 试 验 方 法 | 单 位 | 46 | 68 | 100 | 150 | 220 | 320 | 460 | 680 | 1000 | 密 度 @ 15 癈 | ASTM D1298 | kg/l | 0.880 | 0.886 | 0.890 | 0.894 | 0.898 | 0.901 | 0.906 | 0.920 | 0.940 | 运 动 粘 度 @40癈 | ASTM D445 | cSt | 46.5 | 67.5 | 101.5 | 151.5 | 222.0 | 322.5 | 462.5 | 692.5 | 1115 | @100癈 | ASTM D445 | cSt | 7.0 | 8.9 | 11.4 | 15.0 | 18.9 | 24.3 | 30.7 | 38.1 | 45.5 | 闪 点 | ASTM D92 | 癈 | 214 | 232 | 246 | 237 | 247 | 254 | 253 | 262 | 246 | 倾 点 | ASTM D97 | 癈 | -24 | -24 | -24 | -24 | -21 | -18 | -9 | -9 | -6 | 粘 度 指 数 | ASTM D2270 | | 104 | 103 | 99 | 97 | 97 | 97 | 96 | 90 | 82 | 四 球 焊 接 负 荷 | | kg | | 220 | 230 | 230 | 240 | 240 | 250 | 260 | 260 | Timken OK 负 荷 | | 1b | | 60/70 | 60/70 | 60/70 | 60/70 | 60/70 | 60/70 | 60/70 | 60/70 | FZG 齿 轮 试 验 | DIN 51354 | 合 格 级 别 | | >12 | >12 | >12 | >12 | >12 | >12 | >12 | >12 | 锈 蚀 | ASTM D665B | | | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass |
|
|
Energol GR-XP
High-pressure industrial gear oil
_____________________________________________________________________________
description
High quality, lead-free EP gear oils
Mineral oils.
They are characterized by high load carrying capacity,
high thermal stability, safe corrosion protection,
good demulsibility, impeccable foam behavior
and high oxidation resistance. The transmission oils
Energol GR-XP contains one of phosphorus sulfur compounds
existing EP alloy.
The oils are with those used in gearbox construction
Ferrous and non-ferrous metals and
Elastomer materials compatible. Your cheap
Viscosity-temperature behavior
reduces the starting torque, which is especially at
low ambient temperatures is advantageous.
_____________________________________________________________________________
application
Energol GR-XP oils are for circulating and immersion lubrication
of helical, bevel and worm gears
designed. With leaded oils they should
Not
be mixed. The oils meet the requirements
lubricating oils CLP according to DIN 51 517, part 3,
AGMA 250.04 and US Steel 224. They are of
recommended to all well-known gear manufacturers. The
Temperature of the oil should not exceed 120 ° C.
In all systems with electric heating is
pay particular attention that no thermal
Overloading of the oil occurs, which causes the decomposition of the oil
Additization can lead. The specific heating surface load
should not 1W / cm2 (max 1.5 W / cm2)
exceed.
_____________________________________________________________________________
Key benefits
- Maintenance-free operation between the regular
Overhauls even at elevated temperatures
and unfavorable operating conditions.
- Maximum wear protection through selected
EP additives and resulting high
Load carrying capacity
- Safe corrosion protection
_____________________________________________________________________________
storage
Containers of any kind are covered if possible
store. In case of unprotected storage in the
Outdoors without roofing, the oil drums are lying to
Store in order to prevent ingress of water
and
to preserve the readability of the labels.
The products should not be at temperatures above 60 ° C
be stored. They are more direct
Sunning or frost to protect.