101A series, the laboratory digital display blast drying box using cold-rolled steel plate and surface high temperature baking paint,The working room is provided with a sample partition board, and an insulating layer is arranged between the working room and the outer shell of the box body,Double tempered glass window in the middle of the door is used to observe the condition of the workshop under the condition of heat preservation,The heating elements are distributed at the bottom (or left) of the workshop,The temperature inside the box is controlled by a temperature sensor and a temperature controller,Installed in the control box of the box body, maintenance is more convenient。
干燥箱把设定旋钮的白色标记线对准所需要的温度值,打开电源开关至“开”处,仪表绿灯亮,烘箱开始加热,随着温度上升,温度指示仪上的指针显示相应的温度值,温度达到设定值时,仪表红灯亮,烘箱停止加热,当温度降低,低于设定值时,电加热元件又开始工作,此时,温度指示仪上的绿灯亮,如痴周而复始控制恒温工作。
打开电源,当设定温度低于箱内温度时,红灯亮,电加热元件不工作;当温度高于箱内温度时,绿灯亮,加热元件开始工作,箱内温度骤降上升,如此周而复始控制恒温工作,广泛用于实验室、医疗卫生、医药、生物、农业、电子、化工、环境保护、科研单位等部门对物品进行烘焙、干燥、溶解、消毒等。
参数:
型 号 101-0A 101-1A 101-02A 101-3A
工作电压 220V 50Hz
温度范围 50-250℃
温度波动度 ±1℃
温度均匀度 ±2.5%
整机功率 1.6KW 2KW 2.4KW 4KW
工作室尺寸(高×宽×深)
101-0A 350×350×350mm
101-1A 450×450×350mm
101-02A 550×550×450mm
101-3A 750×600×500mm
外型尺寸(高×宽×深)
101-0A 660×530×670mm
101-1A 760×530×670mm
101-02A 860×630×770mm
101-3A 1250×840×640mm
整机净重 50kg 60kg 75kg 90kg
搁板承重 15kg/片
注意事项:
1、工作电压系交流220V、50HZ(101-4、101-5为三相四线交流220V、50Hz),使用所用电源电压是否相符,将电源插座接地按规定进行有效接地,打开边门、按接线知识牌所指示的相线,中线正确接线,并将外壳上的接地标志按规定有效接地。
2、在通电使用时,切记用手接触箱左侧空间的电器部分或用湿布揩抹及用水冲洗,检修时应将电源切断。
3、电源线不可缠绕在金属物上、不可放置在高温或潮湿的地方防止橡胶老化及漏电。
4、放置箱内物品切勿过挤,必须留出空气自然对流的空间,使潮湿空气能在风顶上加速逸出。
5、应定期检查温度调节器之银触点是否发毛或不平,如有、可用细砂布将触头砂平后再使用,并将经常用清洁布擦净,使之接触良好(注意必须切断电源)室内温度调节器之金属管切勿撞击以免影响灵敏度。
6、本干燥箱无防爆装置,请勿防入易燃物品。
7、每次使用完毕后,须将电源全部切断,经常保持箱内外清洁。
8、当使用温度较高时候,应注意小心**。
关键词:科达实验数显鼓风干燥机 电热恒温培养箱 箱式干燥设备