性能特点:
计算机自动控制、测量准确、性能稳定。
分析快,操作简便。
具有微波、红外两种烘干方式,自动称量样重。烘干时间方式可任意设定,微机烘干效率高、时间短、又节能。对于焦炭、易燃物及金属含量较高的煤、铁矿物质用于红外烘干方式。
炉门采用多重安全保护装置,设有掉电保护功能。
采用进口精密电子分析天平,具有自检和自动清零功能。
自动样品编码、数据自动存盘。
用户可选配RS232串行接口及动态测量软件,与计算机联机,由计算机进行操作和数据处理。
参数:
项目 参数
分析试样数 1-8个
分析时间 <20min
测量精度 ≤0.4%全水≤0.2%分析水
试样质量 10-12g(全水)0.9-1.1g(分析水)
试样粒度 ≤6mm(全水)≤80目(分析水)
微波频率 2450MHz
电源、功率 220V±10% 50Hz,1kW
外形尺寸 510×380×540(mm)
安全使用要点
1)使用仪器请祥细阅读《使用说明书》的全部内容。
2)为了防止触电,必须确保仪器可靠接地。
3)本仪器应在通风干燥、无腐蚀性气体的环境中使用。
4)仅限使用本机配带的高频瓷干燥皿,勿用其它器皿。
5)刚做完试验时要注意干燥皿高温,戴上隔热手套拿取干燥皿,以免*伤。
6)若炉内无试样,而被偶然启动,请立即中断加热程序或打开炉门,停止其工作。
7)须由*人员维修。 如需更换炉内加热管、电源线、保险管等,要采用本公司的配件。
水分测定仪常见处理方法
1、仪器无显示
检查电源连接线,电源开关,蓄电池(对于带有蓄电池的便携型仪器)。
2、测量电开路
检查测量电与仪器连接插头连接是否完好,连接线是否断裂。
3、电解时电解速度总为零
检查电解电与仪器插头连接是否完好,连接线是否断裂。
4、纯水标定结果偏小,注入样品后仪器检测不到样品
检查电解液是否失效。
5、电解过程不能结束
检查电解液是否失效。
Common treatment methods of moisture analyzer
1、The instrument has no display
Check the power cord,Power Switch, accumulator (for portable instruments with accumulators)。
2、Measuring electrode open circuit
Check whether the connection between the measuring electrode and the connecting plug of the instrument is intact and whether the connecting wire is broken
3、The rate of electrolysis is always zero
Check whether the connection between the electrolytic electrode and the instrument plug is intact and whether the connection wire is broken
4、The calibration result of pure water is small, and the sample can not be detected by the instrument after injection
Check the electrolyte for failure。
5、The electrolysis process can not be completed
Check the electrolyte for failure
关键词:微机自动水分测定仪 水分测量仪 化验室水分化验设备